|
Std ID |
Description (Standard Title) |
|
GB/T 4134-2003
|
Gold ingots
|
|
GB/T 4134-2015
|
Gold ingots
|
|
GB/T 4135-2002
|
Silver
|
|
GB/T 4135-2016
|
Silver ingots
|
|
GB/T 4136-1994
|
Reduced iron powders for powder metallurgy
|
|
GB/T 4137-1993
|
Rare-earth ferrosilicon
|
|
GB/T 4137-2004
|
Rare earth ferrosilicon alloy
|
|
GB/T 4137-2015
|
Rare earth ferrosilicon alloy
|
|
GB/T 4138-1993
|
Rare-eatrh ferrosilicomagnesium
|
|
GB/T 4138-2004
|
Rare earth ferrosilicon magnesium alloy
|
|
GB/T 4138-2015
|
Rare earth ferrosilicon magnesium alloy
|
|
GB/T 4139-1987
|
Ferrovanadium
|
|
GB/T 4139-2004
|
Ferrovanadium
|
|
GB/T 4139-2012
|
Ferrovanadium
|
|
GB/T 4140-1993
|
Flat-top chains and associated chainwheels forconveyors
|
|
GB/T 4140-2003
|
Flat-top chains and associated chain wheels for conveyors
|
|
GB/T 414-1978
|
Test methods of soap fastness for printed and dyed fabrics
|
|
GB/T 4142-1984
|
Helical extension springs (rounded end hook over centre)--Typical size
|
|
GB/T 4142-2001
|
Cylindrically coiled tension spring dimensions and parameters (Ring profile with Hook)
|
|
GB/T 4143-1984
|
Frozen semen of bovine
|
|
GB/T 4144-1984
|
Programming languages--Minimal BASIC
|
|
GB/T 11109-1989
|
Anodizing of aluminium and aluminium alloys--Terms
|
|
GB/T 4146.3-2011
|
Textiles - Man-Made Fibers - Part 3: Terms of Inspection
|
|
GB/T 4146-1984
|
Textile terms and terminology (parts of chemical fibers)
|
|
GB/T 4147.1-1984
|
Method of test for nitric acid content in concentrated nitric acid--Volumetry
|
|
GB/T 4147.2-1984
|
Method of test for nitrous acid content in concentrated nitric acid--Volumetry
|
|
GB/T 4147.3-1984
|
Method of test for sulfuric acid content in concentrated nitric acid--Volumetry
|
|
GB/T 4147.4-1984
|
Method of test for ignited residue content in concentrated nitric acid--Gravimetry
|
|
GB/T 4148-1993
|
Rare earth chloride with hexahydrate
|
|
GB/T 4148-2003
|
Rare earth chloride with hexahydrate
|
|
GB/T 4148-2015
|
Rare earth chloride
|
|
GB/T 4150-1996
|
Thorium nitrate for gas mantle
|
|
GB/T 4151-1984
|
Cerium nitrate
|
|
GB/T 4151-1996
|
Cerium nitrate
|
|
GB/T 415-1978
|
Test methods of rubbing fastness for printed and dyed fabrics
|
|
GB/T 4153-1993
|
Mischmetal
|
|
GB/T 4153-2008
|
Mischmetal
|
|
GB/T 4154-1993
|
Lanthanum oxide
|
|
GB/T 4154-2006
|
Lanthanum oxide
|
|
GB/T 4154-2015
|
Lanthanum oxide
|
|
GB/T 4155-1992
|
Cerium oxide
|
|
GB/T 4155-2003
|
Cerium oxide
|
|
GB/T 4155-2012
|
Cerium oxide
|
|
GB/T 4156-1984
|
Metals--Cupping testing method (thickness 0. 2-2mm)
|
|
GB/T 4156-2007
|
Metallic materials -- Sheet and strip -- Erichsen cupping test
|
|
GB/T 4157-1984
|
Sustained load tensile test method of metals for resistance to sulfide stress corrosion cracking
|
|
GB/T 4157-2006
|
Laboratory testing of metals for resistance to specific forms of environmental cracking in H2S environments
|
|
GB/T 4158-1984
|
The izod impact test on metals
|
|
GB/T 4160-1984
|
Steel--Strain ageing sensibility test (Charpy impact method)
|
|
GB/T 4160-2004
|
Steel-strain ageing sensibility test (Charpy impact method)
|
|
GB/T 4161-1984
|
Standard test method for plane-strain fracture toughness of metallic materials
|
|
GB/T 11110-1989
|
Anodizing of aluminium and its alloys--Determination of quality of sealed anodic oxide coating--Admittance test
|
|
GB/T 416-1978
|
Test methods of fastness to perspiration for printed and dyed fabrics
|
|
GB/T 4162-1991
|
Forged and rolled steel bars--Method for ultrasonic examination
|
|
GB/T 10685-2007
|
Wool -- Determination of fiber diameter -- Projection microscope method
|
|
GB/T 4164-1984
|
Metallic powders--Determination of hydrogen reducible oxygen content
|
|
GB/T 4164-2002
|
Metallic powders -- Determination of Hydrogen-reducible oxygen content
|
|
GB/T 4164-2008
|
Metallic powders -- Determination of hydrogen reducible oxygen content
|
|
GB/T 4165-1984
|
Guide to the use of variable capacitors in electronic equipment
|
|
GB/T 4166-1984
|
Methods of test of variable capacitors in electronic equipment
|
|
GB/T 4167-1984
|
Class 1-5 weights
|
|
GB/T 4167-2011
|
Weights
|
|
GB/T 4168-1992
|
Non-automatic balance. Beam balance
|
|
GB/T 4169.10-1984
|
Components of injection mould for plastics--Support pillars
|
|
GB/T 4169.10-2006
|
Components of injection moulds for plastics -- Part 10: Support pillar
|
|
GB/T 4169.11-1984
|
Components of injection mould for plastics--Locating elements
|
|
GB/T 4169.11-2006
|
Components of injection moulds for plastics -- Part 11: Round locating element
|
|
GB/T 4169.1-1984
|
Components of injection mould for plastics-Ejector pins
|
|
GB/T 4169.1-2006
|
Components of injection moulds for plastics -- Part 1: Ejector pin
|
|
GB/T 4169.12-2006
|
Components of injection moulds for plastics -- Part 12: Ejector guide bush
|
|
GB/T 4169.13-2006
|
Components of injection moulds for plastics -- Part 13: Return pin
|
|
GB/T 4169.14-2006
|
Components of injection moulds for plastics -- Part 14: Ejector guide pillar
|
|
GB/T 4169.15-2006
|
Components of injection moulds for plastics -- Part 15: Flat ejector pin
|
|
GB/T 4169.16-2006
|
Components of injection moulds for plastics -- Part 16: Shouldered ejector pin
|
|
GB/T 4169.17-2006
|
Components of injection moulds for plastics -- Part 17: Ejector sleeve
|
|
GB/T 4169.18-2006
|
Components of injection moulds for plastics -- Part 18: Locating ring
|
|
GB/T 4169.19-2006
|
Components of injection moulds for plastics -- Part 19: Sprue bush
|
|
GB/T 4169.20-2006
|
Components of injection moulds for plastics -- Part 20: Limit pin
|
|
GB/T 4169.21-2006
|
Components of injection moulds for plastics -- Part 21: Rectangular locating element
|
|
GB/T 4169.2-1984
|
Components of injection mould for plastics--Straight guide bushes
|
|
GB/T 4169.2-2006
|
Components of injection moulds for plastics -- Part 2: Straight guide bush
|
|
GB/T 4169.22-2006
|
Components of injection moulds for plastics -- Part 22: Round mould opening delayer
|
|
GB/T 4169.23-2006
|
Components of injection moulds for plastics -- Part 23: Rectangular mould opening delayer
|
|
GB/T 4169.3-1984
|
Components of injection mould for plastics--Guide bushes with head
|
|
GB/T 4169.3-2006
|
Components of injection moulds for plastics -- Part 3: Headed guide bush
|
|
GB/T 4169.4-1984
|
Components of injection mould for plastics--Guide pillars with head
|
|
GB/T 4169.4-2006
|
Components of injection moulds for plastics -- Part 4: Headed guide pillar
|
|
GB/T 4169.5-1984
|
Components of injection mould for plastics--Guide pillars with shoulder
|
|
GB/T 4169.5-2006
|
Components of injection moulds for plastics -- Part 5: Shouldered guide pillar
|
|
GB/T 4169.6-1984
|
Components of injection mould for plastics--Spacer blocks
|
|
GB/T 4169.6-2006
|
Components of injection moulds for plastics -- Part 6: Spacer block
|
|
GB/T 4169.7-1984
|
Components of injection mould for plastics--Ejector plates
|
|
GB/T 4169.7-2006
|
Components of injection moulds for plastics -- Part 7: Ejector plate
|
|
GB/T 4169.8-1984
|
Components of injection mould for plastics--Mould plates
|
|
GB/T 4169.8-2006
|
Components of injection moulds for plastics -- Part 8: Mould plate
|
|
GB/T 4169.9-1984
|
Components of injection mould for plastics--Stop pins
|
|
GB/T 4169.9-2006
|
Components of injection moulds for plastics -- Part 9: Stop pin
|
|
GB/T 4170-1984
|
Components of injection mould for plastics--Specification
|
|
GB/T 4170-2006
|
Specification of components of injection moulds for plastics
|
|
GB/T 4171-2000
|
Superior atmospheric corrosion resisting structural steel
|