|
Std ID |
Description (Standard Title) |
|
GB/T 18499.2-2001
|
Knoop hardness test - Part 2: Hardness test
|
|
GB/T 18499.3-2001
|
Knoop hardness test - Part 3: Calibration of standard hardness block
|
|
GB/T 18500.1-2001
|
Semiconductor devices -- Integrated circuits -- Part 4: Interface integrated circuits -- Section 1: Bland detail specification for linear digital-to-analogue converters (DAC)
|
|
GB/T 18500.2-2001
|
Semiconductor devices -- Integrated circuits -- Part 4: Interface integrated circuits -- Section 2: Blank detail specification for linear analogue-to-digital converters (ADC)
|
|
GB/T 18501.1-2001
|
Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high-speed data applications -- Part 1: Generic specification
|
|
GB/T 18501.2-2001
|
Connectors for use in d.c., low-frequency analogue and digital high-speed data applications -- Part 2: Circular connectors with assessed quality -- Sectional specification
|
|
GB/T 1850-1984
|
Marine male threaded weight quick-closing valves
|
|
GB/T 1850-2008
|
Marine male threaded weight quick-closing valves
|
|
GB/T 18502-2001
|
The DC critical current measurement for Ag or Ag-alloy sheathed bismuthal oxide superconductor
|
|
GB/T 18503-2001
|
Micrographics -- Transparent A6 microfiche -- Image arrangements
|
|
GB/T 18503-2008
|
Micrographics -- Transparent A6 microfiche -- Image arrangements
|
|
GB/T 18504-2001
|
Capacitors for use in tubular fluorescent and other discharge lamp circuits -- Performance requirements
|
|
GB/T 18505-2001
|
Car tire balancing test method
|
|
GB/T 18505-2013
|
Dynamic balance test method for motor vehicle tyres
|
|
GB/T 18506-2001
|
Automobile tire uniformity test method
|
|
GB/T 18506-2013
|
Uniformity test method for motor vehicle tyres
|
|
GB/T 18507-2001
|
Regulations for gradation and classification on urban land
|
|
GB/T 18507-2014
|
Regulations for gradation and classification on urban land
|
|
GB/T 18508-2001
|
Regulations for valuation on urban land
|
|
GB/T 18508-2014
|
Regulations for valuation on urban land
|
|
GB/T 18509-2001
|
Electromagnetic compatibility--Guide to the drafting of electromagnetic compatibility standards
|
|
GB/T 18510-2001
|
Guidelines for the validation of alternative methods of analysis for coal and coke
|
|
GB/T 18511-2001
|
Determination of ignition temperature of coal
|
|
GB/T 18512-2001
|
Specifications of anthracite used as PIC for blast furnace
|
|
GB/T 18512-2008
|
Specifications of coal used in pulverized coal injection (PCI)
|
|
GB/T 18513-2001
|
Names of Chinese main imported woods
|
|
GB/T 18514-2001
|
Safety code for wood-based panel machinery
|
|
GB/T 18515-2001
|
Veneer lathe safety for construction
|
|
GB/T 18516-2001
|
Chain saws -- Measurement of cutting rate and fuel consumption -- Engineering method
|
|
GB/T 18517-2001
|
Refrigeration terminology
|
|
GB/T 18517-2012
|
Terminology of refrigeration
|
|
GB/T 18518-2001
|
Cucumbers -- Storage and refrigerated transport
|
|
GB/T 18519-2001
|
Equipment for crop protection -- Sprayers -- Connecting dimensions for nozzles with bayonet fixing
|
|
GB/T 185-1963
|
Fish-plates for 43kg/m and 38kg/m steel rails
|
|
GB/T 18520-2001
|
Equipment for crop protection -- Sprayers -- Connecting dimensions for nozzles and manometers
|
|
GB/T 18521-2001
|
Rules for classification of geographical names and code representation
|
|
GB/T 1852-1993
|
Marine steel flanged steam pressure reducing valves
|
|
GB/T 18522.1-2003
|
General specification for hydrometric instruments -- Part 1: General rules
|
|
GB/T 18522.2-2002
|
General specification for hydrometric instruments -- Part 2: Referential operating condition
|
|
GB/T 18522.3-2001
|
General specification for hydrologic instruments -- Part 3: Basic performance and description method
|
|
GB/T 18522.4-2002
|
General specification for hydrometric instrument -- Part 4: Basic requirements of structure
|
|
GB/T 18522.5-2002
|
Hydrological instruments -- Part 5: the impact of working conditions and test methods
|
|
GB/T 18522.6-2007
|
General specification for hydrometric instrument -- Part 6: Inspection regulation, mark, package, transportation, storage and operation manual
|
|
GB/T 1852-2008
|
Marine cast steel flanged steam pressure reducing valves
|
|
GB/T 18524-2001
|
Codex general technical requirement for food irradiation
|
|
GB/T 18525.1-2001
|
Code of good irradiation practice for insect disinfestation of dried pulses
|
|
GB/T 18525.2-2001
|
Code of good irradiation practice for insect disinfestation of cereal grains products
|
|
GB/T 18525.3-2001
|
Code of good irradiation practice for insect disinfestation of dried red jujubes
|
|
GB/T 18525.4-2001
|
Code of good irradiation practice for insect disinfestation of the fruit of Chinese wolfberry and raisins
|
|
GB/T 18525.5-2001
|
Code of food irradiation practice for the control of moulds and insect disinfestation in desiccated xianggu mushroom
|
|
GB/T 18525.6-2001
|
Code of good irradiation practice for insect disinfestation and control mildew in dried longan
|
|
GB/T 18525.7-2001
|
Code of good irradiation practice for the insect disinfestation in dried lotus seed
|
|
GB/T 18526.1-2001
|
Code of good irradiation practice for the control microflora in tea extract powder
|
|
GB/T 18526.2-2001
|
Code of good irradiation practice for the control of microorganism in pollen
|
|
GB/T 18526.3-2001
|
Code of good irradiation practice for the control of pathogens and other microflora in dehydrated vegetables
|
|
GB/T 18526.4-2001
|
Code of good irradiation practice for the control of pathogens and other microflora in spice and seasoning
|
|
GB/T 18526.5-2001
|
Code of good irradiation practice for cooked meat of livestock and poultry to control microflora and/or extend shelf-life
|
|
GB/T 18526.6-2001
|
Code of good irradiation practice for the control of microflora in pickled meat products with distiller grain
|
|
GB/T 18526.7-2001
|
Code of good irradiation practice for chilled packaged pork cuts to control pathogens and/or extend shelf-life
|
|
GB/T 18527.1-2001
|
Code of good irradiation practice for apples
|
|
GB/T 18527.2-2001
|
Code of good irradiation practice for sprout inhibition of garlic
|
|
GB/T 1853-1994
|
Marine flanged cast steel over board stop check valve
|
|
GB/T 1853-2008
|
Marine flanged cast steel overboard stop check valve
|
|
GB/T 1854-1993
|
Marine flanged cast iron single arrangement suction stop box valve
|
|
GB/T 1855-1993
|
Marine flanged cast iron single arrangement suction stop check box valve
|
|
GB/T 1856-1993
|
Marine flanged cast iron single arrangement exhaust stop box valve
|
|
GB/T 18566-2001
|
Energy use of transport vehicles detection evaluation method
|
|
GB/T 18566-2011
|
Inspection and evaluation method of fuel consumption for road transport vehicle
|
|
GB/T 18567-2001
|
Highway tunnel monitoring system mode
|
|
GB/T 18567-2010
|
Surveillance and control system configuration for freeway tunnel
|
|
GB/T 18569.1-2001
|
Safety of machinery -- Reduction of risks to health from hazardous substances emitted by machinery -- Part 1: Principles and specifications for machinery manufacturers
|
|
GB/T 18569.2-2001
|
Safety of machinery -- Reduction of risks to health from hazardous substances emitted by machinery -- Part 2: Methodology leading to verification procedures
|
|
GB/T 18570.10-2005
|
Preparation of steel substrates before application of paints and related products -- Tests for the assessment of surface cleanliness -- Part 10: Field method for the titrimetric determination of water-soluble chloride
|
|
GB/T 18570.11-2009
|
Preparation of steel substrates before application of paints and related products -- Tests for the assessment of surface cleanliness -- Part 11: Field method for the turbidimetric determination of water-soluble sulfate
|
|
GB/T 18570.12-2008
|
Preparation of steel substrates before application of paints and related products -- Tests for the assessment of surface cleanliness -- Part 12: Field method for the titrimetric determination of water-soluble ferrous ions
|
|
GB/T 18570.2-2001
|
Laboratory determination of chloride on steel substrates before application of paints and assessment of surface cleanliness test cleaned surfaces
|
|
GB/T 18570.2-2009
|
Preparation of steel substrates before application of paints and related products -- Tests for the assessment of surface cleanliness -- Part 2: Laboratory determination of chloride on cleaned surfaces
|
|
GB/T 18570.3-2005
|
Preparation of steel substrates before application of paints and related products -- Tests for the assessment of surface cleanliness -- Part 3: Assessment of dust on steel surface prepared for painting (pressure-sensitive tape method)
|
|
GB/T 18570.4-2001
|
Preparation of steel substrates before application of paints and related products -- Tests for the assessment of surface cleanliness -- Guidance on the estimation of the probability of condensation prior to paint application
|
|
GB/T 18570.5-2005
|
Preparation of steel substrates before application of paints and related products -- Tests for the assessment of surface cleanliness -- Part 5: Measurement of chloride on surfaces prepared for painting (ion detection tube method)
|
|
GB/T 18570.6-2005
|
Steel substrates before application of paints and Tests for the assessment of surface cleanliness -- Part 6: soluble impurities sampling Bresle law
|
|
GB/T 18570.6-2011
|
Preparation of steel substrates before application of paints and related products -- Tests for the assessment of surface cleanliness -- Part 6: Extraction of soluble contaminants for analysis -- The Bresle method
|
|
GB/T 18570.8-2005
|
Preparation of steel substrates before application of paints and related products -- Tests for the assessment of surface cleanliness -- Part 8: Field method for the refractometric determination of moisture
|
|
GB/T 18570.9-2005
|
Preparation of steel substrates before application of paints and related products -- Tests for the assessment of surface cleanliness -- Part 8: Field method for the conductometric determination of water-soluble salts
|
|
GB/T 18571-2001
|
Small craft -- Portable fuel systems for outboard motors
|
|
GB/T 18572-2001
|
Small craft -- Static thrust measurement for outboard motors
|
|
GB/T 18573-2001
|
Small craft -- Electrical devices Lightning protection
|
|
GB/T 18573-2009
|
Small craft -- Electrical devices -- Lightning-protection systems
|
|
GB/T 18574-2001
|
The passenger service signs for subway
|
|
GB/T 18574-2008
|
The passenger service signs for urban rail transit
|
|
GB/T 18575-2001
|
Shaking table test method of earthquake resistant performance for building curtain wall
|
|
GB/T 18576-2001
|
Building construction machinery and equipment -- Terms and definitions
|
|
GB/T 18577.1-2001
|
Definitions and symbols of the size of the earth-moving machinery -- Part 1: host
|
|
GB/T 18577.1-2008
|
Earth-moving machinery -- Definitions of dimensions and codes -- Part 1: Base machine
|
|
GB/T 18577.2-2001
|
Earth-moving machinery -- Definitions of dimensions and symbols -- Part 2: Equipment
|
|
GB/T 18577.2-2008
|
Earth-moving machinery -- Definitions of dimensions and codes -- Part 2: Equipment and attachments
|
|
GB/T 18578-2001
|
Urban geography information system design specifications
|
|
GB/T 18578-2008
|
Specifications for designing urban geographic information system
|
|
GB/T 10199.2-1988
|
Test procedure for facsimile apparatus. Document facsimile (digital)
|
|
GB/T 18589-2001
|
Correction of atmospheric pressure for distillation test of products of coal carbonization
|