|
Std ID |
Description (Standard Title) |
|
GB 3778.1-1989
|
Carbon black for use in rubber industry - Specification limits
|
|
GB 3778-1989
|
Carbon black for use in rubber industry--Specification limits
|
|
GB 3778-1994
|
Carbon black for use in rubber industry
|
|
GB 3778-2003
|
Carbon black for use in rubber products
|
|
GB 3778-2011
|
[GB/T 3778-2011] Carbon black for use in rubber products
|
|
GB 3779-1989
|
Carbon black--Method of packing, storing, transporting, sampling and acceptance
|
|
GB 3780.11-1983
|
Carbon black--Determination of sieve residue
|
|
GB 3780.12-1983
|
Carbon black--Inspection of impurity material
|
|
GB 3780.14-1983
|
Carbon black--Determination of sulphur content (combustion furnace method)
|
|
GB 3780.17-1983
|
Indirect determination of particle size of carbon black--Reflectance method
|
|
GB 3780.2-1983
|
Carbon black--Determination of dibutyl phthalate absorption number (Method A)
|
|
GB 3780.3-1983
|
Carbon black--Determination of dibutyl phthalate absorption number (Method B)
|
|
GB 3780.4-1983
|
Carbon black--Determination of dibutyl phthalate absorption number (Compressed sample)
|
|
GB 3780.7-1983
|
Carbon black--Determination of pH value
|
|
GB 3780.9-1983
|
Carbon black--Determination of ash content (Method A)
|
|
GB 3781.2-1983
|
Acetylene carbon black -- Determination of loss on heating
|
|
GB 3781.3-1983
|
Acetylene carbon black--Determination of ash content
|
|
GB 3783-1983
|
The basic standard for low-voltage apparatus in ships
|
|
GB 3787-1993
|
Technical safety code for management, operation, inspection, maintenance of hand-held motor operated tools
|
|
GB 3788-1983
|
Methods of measurement for the parameters of vacuum capacitors
|
|
GB 3790-1983
|
Methods of measurement of fluorescent display tubes
|
|
GB 379-1964
|
Determination of acidity of ethyl gasoline
|
|
GB 3795-1987
|
Ferromanganese
|
|
GB 3796-1983
|
General rule for packing of pesticides
|
|
GB 3796-1999
|
General rule for packing of pesticides
|
|
GB 3796-2006
|
General rule for packing of pesticides
|
|
GB 3800-1983
|
Technical requirements for automobile frames being overhauled
|
|
GB 3801-1983
|
Technical requirements for automobile engine cylinder blocks and cylinder heads being overhauled
|
|
GB 3802-1983
|
Technical requirements for automobile engine crankshafts being overhauled
|
|
GB 3803-1983
|
Technical requirements for automobile engine camshafts being overhauled
|
|
GB 3804.1-1990
|
A. C. high voltage switches for rated voltages from 3kV to 63kV
|
|
GB 3804-1990
|
A. C. high voltage switches for rated voltages from 3kV to 63kV
|
|
GB 3804-2004
|
[GB/T 3804-2004] High-voltage alternating-current switches for rated voltage above 3.6kV and less than 40.5kV
|
|
GB 3806-1983
|
Polyvinyl chloride plastic sandals
|
|
GB 3807-1983
|
Polyvinyl chloride cellular plastic slippers
|
|
GB 3808-1983
|
Pendulum impact testing machines
|
|
GB 3809-1983
|
General faucets of ceramic wash basins
|
|
GB 3810-1983
|
Sampling schemes and methods for glazing ceramic tiles
|
|
GB 3812-1983
|
Sampling and preparation of montan wax
|
|
GB 3818-1983
|
Graphical symbols for public information
|
|
GB 3819-1983
|
Textile fabrics--Determination of the recovery from creasing of a folded specimen by measuring the angle of recovery
|
|
GB 3820-1983
|
Determination of thickness of woven and knitted fabrics
|
|
GB 3824-1983
|
Methods for chemical analysis of xenotime concentrates--The 5-Br-PADAP and thoron photometric methods for the determination of uranium and thorium
|
|
GB 3826-1983
|
Methods for chemical analysis of cadmium--The atomic absorption spectrophotometric method for the determination of silver content
|
|
GB 3827-1983
|
Methods for chemical analysis of cadmium--The dimethylglyoxime photometric method for the determination of nickel content
|
|
GB 3828.1-1983
|
Methods for chemical analysis of high purity aluminum--The 1, 10-phenanthroline-thiocyanate photometric method for the determination of iron content
|
|
GB 3828.2-1983
|
Methods for chemical analysis of high purity aluminum--The extraction-molybdenum blue photometric method for the determination of silicon content
|
|
GB 3828.3-1983
|
Methods for chemical analysis of high purity aluminum--The diantipyrylmethane-thiocyanate photometric method for the determination of titanium content
|
|
GB 3828.4-1983
|
Methods for chemical analysis of high purity aluminum--The butylrhodamine B photometric method for the determination of gallium content
|
|
GB 3828.5-1983
|
Methods for chemical analysis of high purity aluminum--The anodic stripping voltametric method for the determination of copper, zinc and lead contents
|
|
GB 3830-1983
|
Calendered film (sheet)from flexible PVC
|
|
GB 3831-1983
|
Technical requirements for round broaches
|
|
GB 383-1964
|
Determination of color of kerosene (potassium dichromate color scale method)
|
|
GB 3833-1983
|
Relation between sound pressure levels of narrow bands of noise in a diffuse field and in a frontally-incident free field for equal loudness
|
|
GB 3834-1983
|
General principles of measuring methods of CMOS circuits for semiconductor integrated circuits
|
|
GB 3836.10-1991
|
Electrical apparatus for explosive atmospheres--Hermetically sealed electrical apparatus h
|
|
GB 3836.11-1991
|
Electrical apparatus for explosive atmospheres--Method of test for ascertainment of maximum experimental safe gap
|
|
GB 3836.11-2008
|
[GB/T 3836.11-2008] Explosive atmospheres -- Part 11: Equipment protection by flameproof enclosures “d” -- Method of test for ascertainment of maximum experimental safe gap
|
|
GB 3836.1-1983
|
Electrical apparatus for explosive atmosphere--General requirements
|
|
GB 3836.1-2000
|
Electrical apparatus for explosive gas atmospheres-Part 1: General requirements
|
|
GB 1047-1970
|
Nominal inside diameters for pipes and pipe line accessories
|
|
GB 3836.12-1991
|
Electrical apparatus for explosive atmospheres--Classification of gases or vapours with air according to their maximum experimental safe gaps and minimum igniting currents
|
|
GB 3836.12-2008
|
[GB/T 3836.12-2008] Explosive atmospheres -- Part 12: Classification of mixtures of gases or vapours with air according to their maximum experimental safe gaps and minimum igniting current
|
|
GB 3836.13-1997
|
Electrical apparatus for explosive gas atmospheres. Part 13: Repair and overhaul for apparatus used in explosive gas atmospheres
|
|
GB 3836.13-2013
|
Explosive atmospheres -- Part 13: Equipment repair, overhaul and reclamation
|
|
GB 3836.14-2000
|
Electrical apparatus for explosive gas atmospheres. Part 14: Classification of hazardous areas
|
|
GB 3836.14-2014
|
Electrical apparatus for explosive gas atmospheres -- Part 14: Classification of hazardous areas
|
|
GB 3836.15-2000
|
Electrical apparatus for explosive gas atmospheres. Part 15: Electrical installation in hazardous areas (other than mines)
|
|
GB 3836.16-2006
|
Electrical apparatus for explosive gas atmospheres -- Part 16: Inspection and maintenance of electrical installation (other than mines)
|
|
GB 3836.17-2007
|
Electrical apparatus for explosive gas atmosphere -- Part 17: Construction and use of rooms or building protected by pressurization
|
|
GB 3836.18-2010
|
Explosive atmospheres -- Part 18: Intrinsically safe system
|
|
GB 3836.19-2010
|
Explosive atmospheres -- Part 19: Fieldbus intrinsically safe concept (FISCO)
|
|
GB 3836.20-2010
|
Explosive atmospheres -- Part 20: Equipment with equipment protection level (EPL) Ga
|
|
GB 3836.2-1983
|
Electrical apparatus for explosive atmosphere--Flameproof electrical apparatus d
|
|
GB 3836.2-2000
|
Electrical apparatus for explosive gas atmospheres-Part 2: Flameproof enclosure d
|
|
GB 10476-1989
|
Specifications for urea high pressure condenser
|
|
GB 3836.3-1983
|
Electrical apparatus for explosive atmosphere--Increased safety electrical apparatuse
|
|
GB 3836.3-2000
|
Electrical apparatus for explosive gas atmospheres-Part 3: Increased safety e
|
|
GB 3836.3-2010
|
[Replaced by GB/T 3836.3-2021] Explosive atmospheres -- Part 3: Equipment protection by increased safety “e”
|
|
GB 3836.4-1983
|
Electrical apparatus for explosive atmospheres--Intrinsically safe circuits and electrical apparatusi
|
|
GB 3836.4-2000
|
Electrical apparatus for explosive gas atmospheres. Part 4: Intrinsic safety“i”
|
|
GB 10477-1989
|
Specifications for urea carbon dioxide stripper
|
|
GB 3836.5-1987
|
Electrical apparatus for explosive atmospheres--Pressurized electrical apparatusp
|
|
GB 3836.5-2004
|
Electrical apparatus for explosive gas atmosphere -- Part 5: Pressurized enclosures “p”
|
|
GB 3836.6-1987
|
Electrical apparatus for explosive atmospheres--Oil immersed electrical apparatuso
|
|
GB 3836.6-2004
|
Electrical apparatus for explosive gas atmosphere -- Part 6: Oil-immersion “o”
|
|
GB 3836.7-1987
|
Electrical apparatus for explosive atmospheres--Sand filled electrical apparatus q
|
|
GB 3836.7-2004
|
Electrical apparatus for explosive gas atmosphere -- Part 7: Power filling “q”
|
|
GB 3836.8-1987
|
Electrical apparatus for explosive atmospheres--Non-sparking electrical apparatus n
|
|
GB 3836.8-2003
|
Electrical apparatus for explosive gas atmospheres -- Part 8: Type of protection “n”
|
|
GB 3836.8-2014
|
Electrical apparatus for explosive gas atmospheres -- Part 8: Type of protection “n”
|
|
GB 3836.9-1990
|
Electrical apparatus for explosive atomspheres--Encapsulated electrical apparatus m
|
|
GB 3836.9-2006
|
Electrical apparatus for explosive gas atmospheres -- Part 9: Encapsulation m
|
|
GB 3836.9-2014
|
Electrical apparatus for explosive gas atmospheres -- Part 9: Encapsulation m
|
|
GB 3838-1988
|
Environmental quality standard for surface water
|
|
GB 3838-2002
|
Environmental quality standards for surface water
|
|
GB 3842-1983
|
Emission standard for pollutants at idle speed from road vehicle with petrol engine
|
|
GB 3843-1983
|
Emission standard for smoke at free acceleration from road vehicle with diesel engine
|
|
GB 3844-1983
|
Emission standard for smoke at full load from automotive diesel engine
|
|
GB 3845-1983
|
Measurement method for pollutants at idle speed from road vehicle with petrol engine
|