TSG Z6001-2019 PDF English (TSG Z6001-2013: Older version)

TSGZ6001-2019: PDF in English

TSG Z6001-2019 TSG TECHNICAL SPECIFICATION FOR SPECIAL EQUIPMENT SAFETY Examination rules for special equipment operators Issued by State Administration for Market Regulation May 27, 2019 Table of Contents Chapter 1 General ... 4  Chapter 2 Examination agency ... 5  Chapter 3 Examination and license issuance ... 7  Chapter 4 Review ... 9  Chapter 5 Supplementary provisions ... 10  Appendix A Special Equipment Safety Management and Operator License (Form) ... 13  Appendix B Application form for qualification of special equipment operator . 15  Appendix C Application form for qualification review of special equipment operator ... 16  Appendix D Examination outline of special equipment safety administrator .. 17  Appendix E Examination outline for boiler operator ... 27  Appendix F Examination outline for pressure vessel operators ... 44  Appendix G Examination outline for cylinder filling personnel ... 61  Appendix H Examination outline for elevator operator ... 66  Appendix J Examination outline for lifting machinery operators ... 79  Appendix K Examination outline for passenger ropeway operators ... 94  Appendix L Examination outline for Operators of Large-scale amusement Facilities ... 105  Appendix M Examination outline for special motor vehicle operators in the field (factory) ... 115  Appendix N Examination outline for safety valve verification personnel ... 135  The previous establishment (revision) status of relevant regulations and specifications ... 142  Examination rules for special equipment operators Chapter 1 General Article 1 In order to regulate the examination of special equipment operators, these rules are formulated, in accordance with the "Special Equipment Safety Law of the People's Republic of China", "Provisions on the Supervision of Special Equipment Safety", "Methods for Supervision and Management of Special Equipment Operators". Article 2 These rules are applicable to the qualification examination of special equipment operators (including safety management personnel), within the scope of the "Classification and Projects for Qualification Recognition of Special Equipment Operators", which was formulated AND issued by the State Administration for Market Regulation. For the welding operators of special equipment, the qualification examination shall also meet the requirements of relevant safety technical specifications. Article 3 Special equipment operators shall, in accordance with the requirements of these rules, obtain the "Special Equipment Safety Management and Operator Certificate" (see Appendix A for the format), before engaging in corresponding operations. Article 4 For the examination and license issuance of special equipment operators, they shall be handled, in levels, by the local market supervision- management department at or above the county level. For the specific license- issuing authority and license-issuing items, they shall be determined and announced by the provincial market supervision-management department. Article 5 The license-issuing authority entrusts the examination agency to organize the examination; OR organizes the examination on its own. Article 6 The provincial market supervision-management department is responsible for formulating the specific conditions and entrustment requirements of examination agency. The market supervision-management departments at city level, with districts, OR the license-issuing agencies select and recommend examination agency across the country, in accordance with the specific conditions of the examination agency. Provincial market supervision-management departments coordinate the formation of a examinee library, for examination agency of the province; AND publish them. Examination agency's examinee library shall cover all the license-issuing projects in the province. The license-issuing authority selects the examination agency from the examinee library of examination agency AND entrusts the examination, through purchasing services or other methods; announces the name, address, contact information and examination items of the examination agency entrusted by it, to the public. Article 7 For the projects, where there are less operators, such as hyperbaric chamber, large-scale recreation facility, passenger ropeways, safety valves, the license shall be issued by the provincial market supervision-management department. When the provincial market supervision-management department determines that, the market supervision-management department of city-level, with districts, OR the county-level market supervision-management department issue the license, the provincial market supervision-management department shall uniformly determine the examination agency. Article 8 The State Administration of Market Supervision is responsible for the supervision and management of the examination of special equipment operators nationwide. The local market supervision-management department, at or above the county level, is responsible for the supervision and management of the examination of special equipment operators, within its administrative area, AND the supervision and inspection of examination agency. Chapter 2 Examination agency Article 9 Examination agency shall meet the following basic conditions: (1) Have the qualifications of a legal person; (2) Have a permanent organization and management department AND a fixed office, with no less than 3 full-time personnel (3) Establish an examination management system, including confidentiality, question assignment, examination paper transportation, on-site examination, scoring, result reporting, archives, emergency plan, question bank management and other systems, which can be effectively implemented; (4) According to the corresponding examination outline, clarify the examination scope, examination methods, qualification indicators; (5) Establish on-site test bases and test centers; have places, equipment, facilities and capabilities, that meet the requirements of the corresponding examination outline; (6) Have test management and examination personnel, who can meet the needs of the test. Appraisers shall have a college degree or above AND more than 5 years of work experience in this major; have rich practical experience; be familiar with examination procedures, examination management, examination content, scoring requirements; have corresponding operating personnel qualifications; (7) The examination site shall be equipped with an informatized person-to- ID comparison system; retain the examination image data. If necessary, it shall set up an automatic video capture system on the examination machine. Article 10 The main responsibilities of examination agency: (1) Announce the registration method and test location, test plan, test types, operation items, registration requirements, test procedures, etc. of the examination agency; (2) Announce the scope and items of the theoretical knowledge test and practical skill test; (3) Conduct theoretical knowledge examinations and practical skills examinations, in accordance with the requirements of the examination outline; (4) Announce and report the test results; (5) Establish examination files for special equipment operators; (6) Submit annual work summary, etc. to the license-issuing authority. Article 11 Examination agency shall conduct theoretical knowledge examinations and practical skills examinations, for qualified applicants, at their examination centers and examination bases. For special reasons, if it is necessary to use an examination base, other than the institution, to conduct the examination, it shall report to the license-issuing authority, for written consent, in advance. Examination agency shall not engage in the training work of entrusted examination items. Article 12 For the examination outline for various types of special equipment operators, it can be found in the Appendix of this Rule. Chapter 3 Examination and license issuance Article 13 The examination procedures for special equipment operators include application, acceptance, examination, license issuance. Article 14 Applicants shall meet the following conditions: (1) The age is over 18 but not more than 60 years old; has full capacity for civil conduct; (2) It has no diseases and physical defects that hinder the job; meanwhile meets the physical requirements of the job application for which it is applied; (3) Have a junior high school degree or above; have an education level that meets the requirements of the corresponding application work items; (4) Meet the specific requirements of the corresponding examination outline. Article 15 Applicants shall submit the following application materials to the license-issuing authority of the place of work or residence (household or residence permit): (1) "Application Form for the Qualification of Special Equipment Operator" (see Appendix B, 1 copy); (2) Recent 2-inch frontal bareheaded color photos (2 photos), in white background; (3) Identity certificate (1 copy); (4) Certificate of academic qualifications (1 copy); (5) Physical examination report (1 copy, as required by the corresponding examination outline). Applicants may also fill in the application, through the online registration system, which is designated by the license-issuing authority; attach the scanned documents (PDF or JPG format) of the materials required to be submitted in the preceding paragraph. Article 16 The license-issuing authority shall decide whether to accept the application, within 5 working days, after receiving the application. Where supplementary materials are required from the applicant, the applicant shall be notified, at one time, of the content to be supplemented and corrected. If the application is accepted, the license-issuing authority shall inform the applicant of the acceptance result. The applicant sh.......
Source: https://www.ChineseStandard.net/PDF.aspx/TSGZ6001-2019