HJ 570-2010_English: PDF (HJ570-2010)
| Standard ID | USD | BUY PDF | Lead-Days | Standard Title (Description) | Status |
| HJ 570-2010 | 239 |
Add to Cart
|
3 days
|
Technical requirement for enviromental labeling products. Toner cartridge
| Valid |
| Standard ID | HJ 570-2010 (HJ570-2010) | | Description (Translated English) | Technical requirement for enviromental labeling products. Toner cartridge | | Sector / Industry | Environmental Protection Industry Standard | | Classification of Chinese Standard | A17 | | Classification of International Standard | 87.080 | | Word Count Estimation | 9,920 | | Date of Issue | 2010-05-04 | | Date of Implementation | 2010-07-01 | | Quoted Standard | GB 18455; GB/T 16288; GB/T 16483; GB/T 20861-2007; HJ/T 424-2008; SJ/T 11363 | | Summary | This standard specifies the cartridge environmental labeling products of terms and definitions, basic requirements, technical contents and test method. This standard applies to electronic imaging modalities used in printing devices, from new parts, or new parts and re-use parts manufacturing new toner cartridge. This standard does not apply to print media, media size specifications for A2 (594mm �� 420mm) above (including A2), printing equipment and printing speed is greater than 70 (pages/min) printing devices are used cartridge. |
HJ 570-2010
Technical requirement for enviromental labeling products.Toner cartridge
National Environmental Protection Standard of the People's Republic
Environmental labeling product technical requirements toner cartridge
Technical requirement for environmental labeling products
-Toner cartridge
Published on.2010-05-04
2010-07-01 Implementation
Ministry of Environmental Protection released
Foreword
To implement the "Environmental Protection Law of the People's Republic of China" and the "Circular Economy Promotion Law of the People's Republic of China", reduce the production of toner cartridges,
This standard is formulated for the impact on human health and the environment during use and disposal, and the promotion of the use of environmentally friendly products.
This standard sets forth requirements for toxic and hazardous substances in the toner cartridge and environmental design, recycling and reuse, and public information.
This standard refers to the "Environmental Mark Type No.132" of the Environmental Labeling Agency of Japan Environmental Standards.
Formulated.
This standard applies to China Environmental Labeling Product Certification.
This standard was formulated by the Science and Technology Standards Department of the Ministry of Environmental Protection.
This standard is mainly drafted by. Environmental Protection Center of the Ministry of Environmental Protection, National Office Equipment and Consumables Quality Supervision and Inspection Center, Canon (中中
China) Co., Ltd., China Hewlett-Packard Co., Ltd., Lexmark International Technology Co., Ltd., Ricoh Co., Ltd., Zhuhai Tianwei Pegasus
Printing Supplies Co., Ltd., Zhuhai Nasida Enterprise Management Co., Ltd., Brother (China) Commercial Co., Ltd., Epson (China) Co., Ltd.
Division, Fuji Xerox (China) Co., Ltd., Ri Chong Commercial (Beijing) Co., Ltd., Konica Minolta Business Technology (Wuxi) Co., Ltd.
Division, Sharp Office Equipment (Changshu) Co., Ltd.
This standard was approved by the Ministry of Environmental Protection on May 4,.2010.
This standard has been implemented since July 1,.2010.
This standard is explained by the Ministry of Environmental Protection.
Environmental labeling product technical requirements toner cartridge
1 Scope of application
This standard specifies the terms and definitions, basic requirements, technical contents and inspection methods of the toner cartridge environmental labeling products.
This standard applies to drums used in electronic imaging printing equipment, newly manufactured by new parts, or new parts and reusable parts.
Powder box.
This standard does not apply to printing media with a media size specification of A2 (594 mm × 420 mm) or larger (including A2) and
The print speed is greater than 70 (pages/min) for the toner cartridge used by the printing device.
2 Normative references
The contents of this standard refer to the terms in the following documents. For undated references, the valid version applies to this standard.
GB 18455 packaging recycling mark
GB/T 16288 logo for plastic products
GB/T 16483 chemical safety data sheet content and project sequence
GB/T 20861-2007 Waste product recycling terminology
HJ/T 424-2008 Environmental Labeling Products Technical Requirements Digital Multifunction Copying Equipment
SJ/T 11363 Limitation requirements for toxic and hazardous substances in electronic information products
3 Terms and definitions
The following terms and definitions apply to this standard.
3.1
Toner cartridge
Used in electronic imaging printers, copiers, fax machines, and all-in-ones, from toner cartridges filled with toner or added
A product consisting of a photoconductor drum and a developing unit.
3.2
Use reuse again
The waste product or its components, components continue to be used or cleaned, repaired and continue to be used for the original purpose. (GB/T
20861-2007)
3.3
Recycling recycling
Disposal of waste products to enable them to be reused as raw materials, but does not include the recovery and reuse of energy.
(GB/T 20861-2007)
3.4
Recoverability rate
The sum of the quality of the new product that can be recycled (including the reused portion, the recycled portion, and the energy recovery portion)
The percentage of product quality. (GB/T 20861-2007)
5.4 Hazardous substance discharge requirements
The hazardous substances emitted by the product during its working condition shall comply with the requirements of Table 1.
Table 1 Hazardous Substance Emission Limit Unit. mg/h
Project color monochrome
Total Volatile Organic Compounds (TVOC) ≤18 ≤10
Styrene ≤1.8 ≤1.0
Dust ≤4.0 ≤4.0
Note. The model used for the test should be consistent with the applicable model marked on the product.
5.5 Recycling and disposal
5.5.1 The enterprise shall establish a product recycling system for recycling the products it produces and clearly inform the user of the recycling route.
5.5.2 The enterprise shall establish treatment and disposal measures for the recovered products to ensure that the recycled products are reused or recycled to the utmost extent.
5.6 Packaging materials
5.6.1 The total amount of lead (Pb), mercury (Hg), cadmium (Cd) and hexavalent chromium (Cr6) shall not exceed 100 mg/kg.
5.6.2 CFCs and hydrochlorofluorocarbons (HCFCs) should not be used as blowing agents.
5.6.3 The marking on the plastic packaging material shall comply with the requirements of GB/T 16288.
5.7 Production process requirements
CFCs, carbon tetrachloride (CCl4), 1,1,1-trichloroethane (C2H3Cl3) and hydrogen should not be used in the production process.
CFCs (HCFCs) act as detergents.
5.8 Public Information Requirements
The following information should be included in the product description.
(1) the name of the product;
(2) company name (or company product brand name);
(3) Contact information;
(4) Information related to product recycling;
(5) Product use methods, recommendations for disposal of products and residual toner therein;
(6) The product cannot be forcibly opened, and should prevent inhalation and contact with the skin due to leakage of toner due to improper operation, and when
How to deal with accidents when inhalation and skin contact with toner;
(7) Store the product away from children.
6 Test methods
6.1 The technical content of 5.5 is tested according to the method specified in HJ/T 424-2008. For color products, the test results are lower than the monochrome production.
The indicator of the product can no longer be tested in monochrome.
6.2 Other requirements in the technical content shall be verified by means of document review combined with on-site inspection, and relevant certification materials shall be issued by the enterprise.
And statement, fill in Appendix B and Appendix C as required.
Appendix A
(normative appendix)
Carcinogenic aromatic amine
Chinese name English name CS registration number
4-aminobiphenyl 4-Aminodiphenyl 92-67-1
Benzidine Benzidine 92-87-5
4-Chloro-o-toluidine 4-Chloro-o-Toluidine 95-69-2
2-naphthylamine 2-Naphthylamine 91-59-8
O-Amino-azotoluene o-Amino-azotoluene 97-56-3
2-amino-4-nitrotoluene 2-Amino-4-Nitrotoluene 99-55-8
4-chloroaniline p-Chloroaniline 106-47-8
2,4-diaminoanisole 2,4-Diaminoanisole 615-05-4
4,4'-diaminodiphenylmethane 4,4'-Diaminodiphenylmethane 101-77-9
3,3'-Dichlorobenzidine 3,3'-Dichlorobenzidine 91-94-1
3,3'-dimethoxybenzidine 3,3'-Dimethoxybenzidine 119-90-4
3,3'-Dimethylbenzidine 3,3'-Dimethylbenzidine 119-93-7
4,4'-diamino-3,3'-dimethyldiphenylmethane 3,3'-Dimethyl-4,4'-Diaminodipheylmethane 838-88-0
2-methoxy-5-methylaniline p-Cresidine 120-71-8
4,4'-diamino-3,3'-dichlorodiphenylmethane 4,4'-Methylene bis-(2-Chloroaniline) 101-14-4
4,4'-diaminodiphenyl ether 4,4'-Oxydianiline 101-80-4
4,4'-diaminodiphenyl sulfide 4,4'-Thiodianiline 139-65-1
O-toluidine (2-methylaniline) o-Toluidine 95-53-4
2,4-diaminotoluene 2,4-Diaminotoluene 95-80-7
2,4,5-trimethylaniline 2,4,5-Trimethylaniline 137-17-7
Methoxyaniline Anisidine 90-04-0
4-aminoazobenzene 4-Amino-azo-benzen 60-09-3
3.5
Polymer polymer
A compound obtained by repeating attachment of one or several single compound monomers via a covalent bond via polymerization.
3.6
Copolymer
A polymer obtained by polymerization of two or more different monomers.
3.7
Polymer blend
A physical mixture of two or more polymers having different molecular structures.
4 basic requirements
4.1 Product quality should meet the requirements of the corresponding product quality standards.
4.2 Pollutant emissions from product manufacturing enterprises shall comply with the requirements of national or local pollutant discharge standards.
4.3 Product manufacturers should strengthen clean production in the production process.
5 Technical content
5.1 Product Environmental Design Requirements
5.1.1 The components, structures and functions used in the design of the product shall not impede the reuse of the product.
5.1.2 The mechanical connection of the materials (components) of the product should be easy to disassemble and there should be no non-detachable connection.
5.1.3 The outer casing of the product shall not be coated or composite structural material.
5.1.4 Between the replaceable and fixed parts of the product, there should be sufficient space for the insertion tool.
5.1.5 The recyclability of the product should be above 95% (mass fraction and the quality of the toner should be removed).
5.1.6 Polybrominated biphenyls (PBB), polybrominated diphenyl ethers (PBDE) or chlorinated alkanes (specifically referred to as chain carbons in the range of 10 to 13) shall not be used in the product.
An alkane compound having a chlorine content of 50% or more).
5.1.7 There are design requirements for the use of reusable components.
5.1.8 For parts that are not easily peeled off, use the same material as the adhesive part, or do not affect the recycled materials.......
|