GB/T 36525-2018 English PDF

US$119.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 36525-2018: Tools for pressing -- Cam driver plates
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 36525-2018	119	Add to Cart	3 days	Tools for pressing -- Cam driver plates	Valid

Similar standards

GB/T 45677   GB/T 6110   JB/T 3943   GB/T 45361   GB/T 36524   

Basic data

Standard ID: GB/T 36525-2018 (GB/T36525-2018)
Description (Translated English): Tools for pressing -- Cam driver plates
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J46
Classification of International Standard: 25.120.10
Word Count Estimation: 6,648
Date of Issue: 2018-07-13
Date of Implementation: 2019-02-01
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 36525-2018: Tools for pressing -- Cam driver plates

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Tools for pressing--Cam driver plates ICS 25.120.10 J46 National Standards of People's Republic of China Die wedge (ISO 23481.2013, MOD) Published on.2018-07-13 Implementation of.2019-02-01 State Market Supervisory Administration China National Standardization Administration issued

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard uses the redrafting method to modify the ISO 23481.2013 "die wedge plate". There are technical differences between this standard and ISO 23481.2013, and the terms involved in these differences have been passed on the outer margins of the margins. The vertical single line (—) is marked. The corresponding technical differences and their reasons are as follows. ---About the normative reference documents, this standard has made technical adjustments to adapt to China's technical conditions, adjustments The situation is reflected in Chapter 2, “Regulatory References”, and the specific adjustments are as follows. ● Replace ISO 2768-1 with GB/T 1804 equivalent to the international standard; ● Replaced ISO 4762 with GB/T 70.1 modified to adopt international standards; ● Replace ISO 13715 with GB/T 19096, which is equivalent to the international standard. --- In Figure 1, the "wedge drive plate" and "wedge wedge" are added to identify the specific location of the part. --- Change the outline of the adjacent auxiliary parts in Figure 1 that are not part of the "Wedge Drive Plate" or "Wedge Plate Slider" to a two-dot line. --- Removed the incompletely expressed pixels on the right side of Figure 1. --- Increased the section line of the components in Figure 1 to clarify the relationship between the components. --- In the front view of Figure 2, rounded corners R2 and chamfers C2 are added to the edge of the wedge. This standard has made the following editorial changes. ---In the "range", "the wedge drive plate and the wedge slide plate for the die" added the description "(collectively referred to as the wedge plate)" to clear the standard name Relationship --- Added "This standard applies to the wedge plate for die" in the "Scope" to meet the requirements of GB/T 1.1-2009; --- Revised the labeling and sectioning lines of individual dimensions in Figure 2 to comply with the national standards for technical drawings; --- Change the W in Figure 2 to use α to conform to the common notation of national standards for mechanical drawings; --- In the front view of Figure 2, the counterbore diameter 20 is pre-filled with φ to meet the national standards for mechanical drawings; --- Modified the way the mark was expressed to comply with national standards. This standard is proposed and managed by the National Die Standardization Technical Committee (SAC/TC33). This standard was drafted. Huazhong University of Science and Technology, Hefei Yuheng Auto Parts Co., Ltd., Zhangzhou Diemo Equipment Mould Manufacturing Co., Ltd. Xiangxin Technology Co., Ltd., Ningbo Hongxiecheng Auto Parts Co., Ltd., Cangzhou Donghua Mould Manufacturing Co., Ltd., Xiamen Meike Security Technology Co., Ltd., Zhejiang Ouyi Intelligent Kitchen Co., Ltd., Xi'an Yuntuo Electric Co., Ltd., Xiamen Oushengsi Technology Co., Ltd., Gui Lin Electric Research Institute Co., Ltd. The main drafters of this standard. Deng Lei, Wang Chao, Wang Luohai, Liu Jinjun, Zhang Fengwei, Wang Huadong, Yan Guanghui, Fang Zhiming, Liu Junhua, Zhang Hengmu, Zhang Li, Wang Xinyun, Chen Junsheng, Chu Kaifeng, Zhou Fupeng, You Limin, Yang Lei, Jin Junsong. Die wedge

1 Scope

This standard specifies the main dimensions and dimensions of the wedge drive plate and the wedge slide (collectively referred to as the wedge plate, as shown in Figure 1). Poor, and specifies the marking of the wedge plate. This standard applies to the wedge plate for die. Description. 1---inclined wedge drive board; 2---inclined wedge skateboard. Figure 1 Example of a wedge plate application

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 70.1 hexagon socket head cap screws (GB/T 70.1-2008, ISO 4762.2004, MOD) GB/T 1804 General tolerances Linear and angular tolerances for unfilled tolerances (GB/T 1804-2000, eqvISO 2768-1. 1989) GB/T 19096 Technical drawing drawing method does not define the terminology and note of the shape edge (GB/T 19096-2003, ISO 13715.2000, IDT)

3 size

The dimensions of the wedge plates are to comply with the requirements of Figure 2 and Table 1. Undefined shape edges shall comply with the provisions of GB/T 19096. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 36525-2018_English be delivered?

Answer: Upon your order, we will start to translate GB/T 36525-2018_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 36525-2018_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 36525-2018_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.