GB/T 32561.1-2016 English PDF

US$199.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 32561.1-2016: Measuring method for chalcogenide infrared optical glass -- Part 1: Homogeneity
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 32561.1-2016	199	Add to Cart	3 days	Measuring method for chalcogenide infrared optical glass -- Part 1: Homogeneity	Valid

Similar standards

GB/T 36403   GB/T 36265   GB/T 33831   GB/T 32561.5   GB/T 32561.4   GB/T 32561.3   

Basic data

Standard ID: GB/T 32561.1-2016 (GB/T32561.1-2016)
Description (Translated English): Measuring method for chalcogenide infrared optical glass -- Part 1: Homogeneity
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: Q37
Classification of International Standard: 81.040.10
Word Count Estimation: 10,112
Date of Issue: 2016-02-24
Date of Implementation: 2016-10-01
Regulation (derived from): National Standard Announcement No
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the testing principles, equipment and equipment, test conditions, samples, test procedures, data processing, measurement uncertainty and test report of infrared optical sulfur-based glass uniformity. This standard applies to the infrared optical glass uniformity of the test, can also be used for other infrared optical glass, infrared crystal, infrared ceramic infrared material uniformity detection.

GB/T 32561.1-2016: Measuring method for chalcogenide infrared optical glass -- Part 1: Homogeneity

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Measuring method for chalcogenide infrared optical glass.Part 1. Homogeneity ICS 81.040.10 Q37 National Standards of People's Republic of China Methods for the measurement of infrared optical sulfur - based glass Part 1. Uniformity Part 1. Homogeneity 2016-02-24 released 2016-10-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China China National Standardization Management Committee released

Foreword

GB/T 32561 "infrared optical sulfur glass test method" is divided into three parts. - Part 1. Uniformity; Part 2. stripes; Part 3. Impurities. This part is part 1 of GB/T 32561. This part is drafted in accordance with the rules given in GB/T 1.1-2009. This part is made and centralized by China Ordnance Industry Group Corporation. This part of the drafting unit. Hubei Xinhua Huaguang Information Materials Co., Ltd., China Ordnance Industry Standardization Institute. The main drafters of this part. Hu Xiangping, Mai Lubo, Xu Guangyi, Liu Xiangdong, Yang Jinxia, Tang Xueqiong, Liang Lixin, Xu Huafeng. Methods for the measurement of infrared optical sulfur - based glass Part 1. Uniformity

1 Scope

GB/T 32561 this part of the provisions of the infrared optical sulfur glass uniformity of the test principle and equipment and equipment, test conditions, test Samples, test procedures, data processing, measurement uncertainty and test reports. This part is suitable for infrared optical sulfur glass uniformity test, can also be used for other infrared optical glass, infrared crystal, infrared ceramic And other infrared material uniformity detection.

2 terms and definitions

The following terms and definitions apply to this document. 2.1 Homogeneity The same piece of infrared optical sulfur glass, in the direction perpendicular to the specified optical path unit cross-sectional area, the unit optical path thickness of the refractive index distribution is not Consistency, usually characterized by refractive index PV and standard deviation. [ISO 10110-4, definition 2.1] 2.2 Refractive index PV value peak-to-valeyvalueofrefractiveindex PVΔn The difference between the maximum value and the minimum value of the refractive index distribution of the interference test.

3 test principle

The wavefront error was measured by the interference method to obtain the distribution of the refractive index difference of the material, and the refractive index PV (PVΔn) of the uniformity of the material was calculated. Values and standard deviations. Four-step interferometry test principle shown in Figure 1. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 32561.1-2016_English be delivered?

Answer: Upon your order, we will start to translate GB/T 32561.1-2016_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 32561.1-2016_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 32561.1-2016_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.