Home Cart Quotation Policy About-Us
www.ChineseStandard.net
SEARCH

GB/T 32556.3-2016 English PDF

Q: How long will the true-PDF of English version of GB/T 32556.3-2016 be delivered?

Upon your order, we will start to translate GB/T 32556.3-2016_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Q: Can I share the purchased PDF of GB/T 32556.3-2016_English with my colleagues?

Yes. The purchased PDF of GB/T 32556.3-2016_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Q: Does the price include tax/VAT?

Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries). Avoidance of Double Taxation Agreements (DTAs) between Singapore and 100+ Countries: https://www.iras.gov.sg/taxes/international-tax

Q: Do you accept my currency other than USD?

Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

US$219.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 32556.3-2016: Cutter arbors with tenon drive -- Part 3: Dimensions of hollow taper interface with flange contact surface
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 32556.3-2016	219	Add to Cart	3 days	Cutter arbors with tenon drive -- Part 3: Dimensions of hollow taper interface with flange contact surface	Valid

Similar standards

GB/T 33524.2 GB/T 5104 GB/T 972 GB/T 32557.1 GB/T 32557.2 GB/T 32556.2

Basic data

Standard ID: GB/T 32556.3-2016 (GB/T32556.3-2016)
Description (Translated English): Cutter arbors with tenon drive -- Part 3: Dimensions of hollow taper interface with flange contact surface
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J41
Classification of International Standard: 25.100
Word Count Estimation: 11,129
Date of Issue: 2016-02-24
Date of Implementation: 2016-09-01
Regulation (derived from): National Standard Announcement No
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China

GB/T 32556.3-2016: Cutter arbors with tenon drive -- Part 3: Dimensions of hollow taper interface with flange contact surface

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Cutter arbors with tenon drive - Part 3. Dimensions of hollow taper interface with flange contact surface ICS 25.100 J41 National Standards of People's Republic of China End with key drive cutter bar - Part 3. Dimensions of hollow taper shank cutter bar with flange contact surface (ISO 3937-3.2008, MOD) Issued on. 2016-02-24 2016-09-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

GB/T 32556 "with the end of the cutter bar key drive" is divided into three parts. --- Part 1. Dimensions cutter bar with Morse taper shank; --- Part 2. with 7.24 taper shank cutter bar size; Cutter bar size with hollow taper shank flange contact surface. Part --- 3. This section GB/T 32556 Part 3. This section drafted in accordance with GB/T 1.1-2009 given rules. This section uses redrafted Law Amendment uses ISO 3937-3.2008 "with the end of the key drive cutter bar - Part 3. Hollow taper shanks with flange contact surface of the cutter bar Size" (in English). Compared to 2008 the following modifications have differences in editorial and technical terms related to these differences have been by a single vertical line (︱) its outer margin positions were marked. this part and ISO 3937-3. --- Deleted PDF disclaimer and introduction; --- Remove the preface of international standards, it added a new preface; --- Normative references to international standards in the alternative by the national standards; --- Mechanical drawing standards prescribed by our country; --- Table 1, Table 2, a 20 revised to 25.4; --- Adds table Note; --- Increasing the mark; --- Increased signs and packaging. This part is proposed by China Machinery Industry Federation. This part of the tool by the National Standardization Technical Committee (SAC/TC91) centralized. This section is responsible for drafting unit. Harbin Measuring & Cutting Tool Group Co., Ltd., Chengdu Tool Research Institute Limited. The main drafters of this section. Wang Zhigang, ZHENG force, Sun Xiuwen, Lucy Liu. Key drive belt cutter bar ends Part 3. Hollow with flange contact surface of taper Size cutter bar

1 Scope

GB/T 32556 provisions of this part of the basic requirements for hollow taper shanks with flange contact surface (HSK short handle) the type and size, and material hardness, marks, logos and packaging. This section applies to the cutter bar with HSK shank.

2 Normative references

The following documents for the application of this document is essential. For cited documents with dates, only the dated edition applies to this document. For undated references, the latest edition (including any amendments) applies to this document. GB/T 1184 shape and position tolerances without individual tolerance value (GB/T 1184-1996, ISO 2768-2. 1989, EQV) GB/T 1804 General tolerances for linear and angular dimensions without individual tolerance tolerance (GB/T 1804-2000, ISO 2768-1. 1989, EQV) GB/T 19449.1 with a hollow conical flange contact surface interface - Part 1. shank Size (GB/T 19449.1-2004, ISO 12164.2001, IDT) GB/T 20329 end key drive arbor for milling cutters and tool holders swap Size (GB/T 20329-2006, ISO 2780. 1986, IDT)

3 type and size

3.1 General provisions All dimensions and tolerances are in millimeters. Not according to individual tolerance GB/T "k" class of 1184 and according to GB/T 1804 "m" of class. The cutter Arbor knife interchangeability dimensions conform to GB/T 20329. Locking threaded hole cutter dimensions conform to GB/T 20329. Shank size HSK shank in line with GB/T 19449.1. 3.2 Common HSK shank cutter bar Common HSK shank cutter bar of the type shown in Figure 1 by the size given in Table 1. ......

Image

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 32556.3-2016_English be delivered?

Answer: Upon your order, we will start to translate GB/T 32556.3-2016_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 32556.3-2016_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 32556.3-2016_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.