GB/T 32556.2-2016 English PDF

US$219.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 32556.2-2016: Cutter arbors with tenon drive -- Part 2: Dimensions of 7: 24 taper
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 32556.2-2016	219	Add to Cart	3 days	Cutter arbors with tenon drive -- Part 2: Dimensions of 7: 24 taper	Valid

Similar standards

GB/T 33524.2   GB/T 5104   GB/T 972   GB/T 32557.1   GB/T 32557.2   GB/T 32556.3   

Basic data

Standard ID: GB/T 32556.2-2016 (GB/T32556.2-2016)
Description (Translated English): Cutter arbors with tenon drive -- Part 2: Dimensions of 7: 24 taper
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J41
Classification of International Standard: 25.100
Word Count Estimation: 11,171
Date of Issue: 2016-02-24
Date of Implementation: 2016-09-01
Quoted Standard: GB/T 1184; GB/T 1804; GB/T 3837; GB/T 10944.1; GB/T 20329
Adopted Standard: ISO 3937-2-2008, MOD
Regulation (derived from): National Standard Announcement No
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the type and size, material and hardness, marking, marking and packing of the 7: 24 taper shank with end key drive. This standard applies to 7: 24 with a tool changer knife handle taper iron cutter, with A-and U-type automatic tool changer 7: 24 cone tool handle of the cutter rod. This standard does not apply to a milling tool shank with a 7: 24 conical tool shank with J-type automatic tool change.

GB/T 32556.2-2016: Cutter arbors with tenon drive -- Part 2: Dimensions of 7: 24 taper

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Cutter arbors with tenon drive - Part 2. Dimensions of 7. 24 taper ICS 25.100 J41 National Standards of People's Republic of China Key drive belt cutter bar ends Part 2. With 7.24 shank cutter bar size (ISO 3937-2.2008, MOD) Issued on. 2016-02-24 2016-09-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

GB/T 32556 "with the end of the cutter bar key drive" is divided into three parts. --- Part 1. Dimensions cutter bar with Morse taper shank; --- Part 2. with 7.24 taper shank cutter bar size; --- Part 3. belt cutter bar size flange contact surface of the hollow handle. This section GB/T Part of 232,556. This section drafted in accordance with GB/T 1.1-2009 given rules. This section uses redrafted Law Amendment uses ISO 3937-2.2008 "with the end of the key drive cutter bar - Part 2. With 7.24 taper shank cutter bar Size" (in English). Compared to 2008 the following modifications have differences in editorial and technical terms related to these differences have been by a single vertical line (︱) its outer margin positions were marked. this part and ISO 3937-2. --- Deleted PDF disclaimer and introduction; --- Remove the preface of international standards, it added a new preface; --- Normative references to international standards in the alternative by the national standards; --- Mechanical drawing standards prescribed by our country; --- 3.1, "mk" level to "k" level; --- Table 2, taper No. 30 and No. 40, d3 value by "50" to "48"; --- Table 3, taper No. 45, d2 is 32 rows, l4 value from "44" to "60"; taper No. 50, d2 27 and 32 lines, l4 value by "44" change "60"; --- Table 4, d2 is 16 lines, l2 by "20" to "22"; taper No. 45, d2 is 40 lines, l3 from "35.9" to "30.9"; --- Adds table Note; --- Increasing the mark; --- Increased signs and packaging. This part is proposed by China Machinery Industry Federation. This part of the tool by the National Standardization Technical Committee (SAC/TC91) centralized. This section is responsible for drafting unit. Chengdu into a tool Group Co., Ltd. Chengdu Tool Research Institute. The main drafters of this section. Chen Li, Lucy Liu, Chen Shichang. Key drive belt cutter bar ends Part 2. With 7.24 taper shank cutter bar size

1 Scope

This section provides the basic requirements with key drive end types and dimensions, material and hardness 7.24 shank cutter bar, marks, logos and packaging. This section applies to manual tool change with 7.24 taper shank of cutter bar, cutter bar with A-type and U-type automatic tool changer 7.24 taper tool shank. This section does not apply to cutter bar with J-type automatic tool changer tool shank taper 7.24.

2 Normative references

The following documents for the application of this document is essential. For cited documents with dates, only the dated edition applies to this document. For undated references, the latest edition (including any amendments) applies to this document. GB/T 1184 shape and position tolerances without individual tolerance value (GB/T 1184-1996, ISO 2768-2. 1989, EQV) GB/T 1804 General tolerances for linear and angular dimensions without individual tolerance tolerance (GB/T 1804-2000, ISO 2768-1. 1989, EQV) GB/T 3837 7.24 taper shank tool manually (GB/T 3837-2001, ISO 297. 1988, EQV) GB/T 10944.1 ATC 7.24 taper shank tools - Part 1. A, AD, AF, U, UD and UF type shank dimensions and marking (GB/T 10944.1-2013, ISO 7388-1.2007, IDT ) GB/T 20329 end key drive arbor for milling cutters and tool holders swap Size (GB/T 20329-2006, ISO 2780. 1986, IDT)

3 type and size

3.1 General provisions All dimensions and tolerances are in millimeters. Not according to individual tolerance GB/T "k" class of 1184 and according to GB/T 1804 "m" of class. The cutter Arbor knife interchangeability dimensions conform to GB/T 20329. Locking threaded hole cutter dimensions conform to GB/T 20329. 7.24 taper shank tool manually in line with GB/T 3837, ATC 7.24 cone tool shank in line with GB/T 10944.1. 3.2 with manual tool change 7.24 taper shank cutter bar 3.2.1 General 7.24 shank cutter bar type size with manual tool change shown in Figure 1. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 32556.2-2016_English be delivered?

Answer: Upon your order, we will start to translate GB/T 32556.2-2016_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 32556.2-2016_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 32556.2-2016_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.