GB/T 12923-2011 English PDFUS$599.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 12923-2011: Terminology for ship technology -- Repairing and shipbuilding facilities Status: Valid GB/T 12923: Historical versions
Basic dataStandard ID: GB/T 12923-2011 (GB/T12923-2011)Description (Translated English): Terminology for ship technology -- Repairing and shipbuilding facilities Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: U04 Classification of International Standard: 47.020.01 Word Count Estimation: 26,259 Date of Issue: 2011-12-30 Date of Implementation: 2012-06-01 Older Standard (superseded by this standard): GB/T 12923-1991 Regulation (derived from): Announcement of Newly Approved National Standards No. 23 of 2011 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the basic facilities, slipway, water equipment, dock, floating dock and shipyard pier repair, shipbuilding facilities related terms and definitions. This standard applies to vessels research, design, production, education, the use of other fields. GB/T 12923-2011: Terminology for ship technology -- Repairing and shipbuilding facilities---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Terminology for ship technology. Repairing and shipbuilding facilities ICS 47.020.01 U04 National Standards of People's Republic of China Replacing GB/T 12923-1991 Terminology for ship technology repair, shipbuilding facilities Issued on. 2011-12-30 2012-06-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThis standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard replaces GB/T 12923-1991 "Terminology for ship technology repair, shipbuilding facilities," compared with the GB/T 12923-1991, the main Technical changes are as follows. --- Increasing the active tire rack, bunkers and other terminology entries (see 2.6, 2.7, etc.); Added --- in the English index. The standard proposed by China State Shipbuilding Corporation. This standard by the National Standardization Technical Committee Marine boat ship based Technical Committee (SAC/TC12/SC3) centralized. This standard was drafted. China Shipbuilding Technology and Economy Research Institute, Jiangsu Rongsheng Heavy Industries Co., Ltd. The main drafters of this standard. Cheng Nan, Chen Guorong, Liu Weiping, Wu Jing. This standard replaces the standards previously issued as follows. --- GB/T 12923-1991. Terminology for ship technology repair, shipbuilding facilities1 ScopeThis standard specifies the relevant terms of basic facilities, berth, water equipment, dock, floating dock and pier repair shipyards, shipbuilding facilities and definition. This standard applies to research, design, production, education, and other fields use the ship.2 Basic facilities2.1 Production sites productionsites Conduct ship repair workshop, space, berth, dock, docks, warehouses and office premises. 2.2 Shoreline waterfront Shipyard waters adjacent land and sea, river junction. 2.3 Loft facilities loftingfacilities On the hull, outfitting, etc. collectively lofting tools and equipment. 2.4 Painting facilities paintingfacilities Painting rooms, painting lines, painting and other work area of \u200b\u200bthe facility for painting. 2.5 Lifting facilities hoistingfacilities Light lifting device has a lifting, handling functions, cranes and lifts in general. 2.6 Adjustable tire rack adjustabletirestand For manufacturing a line segment type bracket, the inner sleeve, the outer sleeve, the stopper pin and tapered head spin components. According hull bending coordinate Value is converted into active curved surface of the body. 2.7 Bunker bunker Used under certain conditions Overweight segmented turning 180 ° soft landing place. The pit depth of about 1m, length and width dimensions than turning large segment 20%, laying sand pit, and the pit surface flat, cited Bottom drainage ditch.3 berth3.1 Berth buildingberth; berth And launching facilities associated built specifically for marine or land-based site structure. With a construction assembly and welding equipment, lifting equipment, and shift Ship equipment and various power supply line. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 12923-2011_English be delivered?Answer: Upon your order, we will start to translate GB/T 12923-2011_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 12923-2011_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 12923-2011_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 12923-2011?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 12923-2011 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
