GB/T 11847-2008 English PDF

US$229.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 11847-2008: Determination of specific surface area of uranium dioxide powder by BET capacity method
Status: Valid

GB/T 11847: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 11847-2008	229	Add to Cart	3 days	Determination of specific surface area of uranium dioxide powder by BET capacity method	Valid
GB/T 11847-1989	319	Add to Cart	3 days	Determination of specific surface area of uranium dioxide powder by multipoint BET method	Obsolete

Similar standards

GB/T 10266   GB/T 11842   GB/T 11846   GB/T 11844   

Basic data

Standard ID: GB/T 11847-2008 (GB/T11847-2008)
Description (Translated English): Determination of specific surface area of uranium dioxide powder by BET capacity method
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: F46
Classification of International Standard: 27.120.30
Word Count Estimation: 10,118
Date of Issue: 2008-06-19
Date of Implementation: 2009-04-01
Older Standard (superseded by this standard): GB/T 11847-1989
Regulation (derived from): Announcement of Newly Approved National Standards No. 11 of 2008 (No. 124 overall)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the method for the determination of the BET specific surface area of ??uranium dioxide powder method. This standard applies to uranium dioxide powder specific surface area measurement, the measuring range is: (1 to 40) m/g. Other powder or porous material can be measured with reference to the specific surface area used.

GB/T 11847-2008: Determination of specific surface area of uranium dioxide powder by BET capacity method

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Determination of specific surface area of \u200b\u200buranium dioxide powder by BET capacity method ICS 27.120.30 F46 National Standards of People's Republic of China Replacing GB/T 11847-1989 Uranium dioxide powder specific surface area measuring BET volumetric method Posted 2008-06-19 2009-04-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard replaces GB/T 11847-1989 "uranium dioxide powder by multipoint BET specific surface area of \u200b\u200blaw." This standard compared with GB/T 11847-1989, the main changes are as follows. --- Increase in single-point BET method, including the principle of a single point BET method, test procedures, the results of calculation and precision of the method; --- Equipment and materials added to the material, liquid oxygen to liquid nitrogen thermometer thermometer; --- Take a sample and the amount of vacuum degassing range has been adjusted; --- Instrument calibration constant as a normative Annex A; --- Mercury vapor pressure and density table table as informative Appendix B; --- Original instrument assembly Appendix A Technical Notes as instrument parameters. Appendix A of this standard is a normative appendix, Appendix B is an informative annex. The standard proposed by China National Nuclear Corporation. This standard by the National Standardization Technical Committee of nuclear energy. This standard was drafted. China Jianzhong Nuclear Fuel Limited. The main drafters. Zhang Xixiang, Qin Zhiping, You Yafei, Chen Lin. This standard replaces the standards previously issued as follows. --- GB/T 11847-1989. Uranium dioxide powder specific surface area measuring BET volumetric method

1 Scope

This standard specifies the BET volumetric method (single point, multipoint) uranium dioxide powder specific surface area measuring method. This standard applies to uranium dioxide powder specific surface area measurement, measuring range. (1 ~ 40) m2/g. Powders or other porous material Than the surface area can be measured with reference to use.

2 principle of the method

2.1 Fundamentals Placed in the sample gas in the system, the external and internal surfaces of the through-hole material particles will physically adsorbed at low temperatures. Allow a known amount of Adsorbed gas into the sample chamber, the sample is adsorbed gas, and thus the limited volume constant pressure decreases until adsorption equilibrium is reached until. It is equal to the amount of gas adsorbed into the sample burette and the total amount of gases adsorbed equilibrated sample burette remaining gas bubbles and the amount of BET adsorption principle formula, see formula (1). M1 = 1C Vp + C-1 C Vp m1 (1) Where. C --- adsorption heat-related constants; Vp m1 --- single molecular layer adsorption capacity, in milliliters (mL). It was measured to calculate the adsorption capacity of the sample monolayer according to formula (1), to calculate the surface area of \u200b\u200bthe sample. More than 2.2-point method 2.2.1 the total adsorption (Vp) is calculated. The total adsorption (Vp) See calculation formula (2). Vp = 273.2 1.0132 × 105 Vp 1 T1 - T2 - The T () Ju (2) Where. Vp 1 --- FIG. 1 A, B, 9, C to 0 between the volume in milliliters (mL of); Vp 2 --- FIG. 1 H, A, B, 9, C to 0 between the volume in milliliters (mL of); T2 --- Adsorption equilibrium temperature when the unit is open (K); α --- nitrogen at liquid nitrogen temperature correction factor undesirable behavior; Vp 3 --- grinding mouth H vial volume except the following sample, in milliliters (mL); T Ju --- liquid nitrogen temperature, the unit is open (K). ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 11847-2008_English be delivered?

Answer: Upon your order, we will start to translate GB/T 11847-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 11847-2008_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 11847-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 11847-2008?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 11847-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.