GB/T 11759-2008 English PDFUS$139.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 11759-2008: Raw cattle hides and skins Status: Valid GB/T 11759: Historical versions
Basic dataStandard ID: GB/T 11759-2008 (GB/T11759-2008)Description (Translated English): Raw cattle hides and skins Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: Y46 Classification of International Standard: 59.140.30 Word Count Estimation: 6,616 Date of Issue: 2008-07-31 Date of Implementation: 2009-05-01 Older Standard (superseded by this standard): GB/T 11759-1989 Regulation (derived from): National Standard Approval Announcement 2008 No.12 (Total No.125) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the classification and grading of leather, inspection methods, inspection rules and packaging, transport and storage. This standard applies to untreated after slaughter, or just after a simple drying, or after freezing, salted or after treatment, properly preserved or processed rawhide. GB/T 11759-2008: Raw cattle hides and skins---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Raw cattle hides and skins ICS 59.140.30 Y46 National Standards of People's Republic of China Replacing GB/T 11759-1989 Leather Posted 2008-07-31 2009-05-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThis standard reference ISO /PDTR2822-2 "rawhide leather - Part 2. Classification according to the quality guidelines" (Rawhidesand skins-Cattlehidesandskins-Part 2. Guidelinesforgradingonthebasisofmass), this standard is GB/T 11759-1989 "cowhide" amendments. This standard replaces GB/T 11759-1989. This standard compared with GB/T 11759-1989, the main changes are as follows. --- Refine the scope of the standard; --- Cancel "terminology"; --- Cancel "processing requirements"; --- The "specifications" to "classification and grading"; --- Cancel "Caution", "other", "variety than the poor," "do not board than the poor", "yellow leather quality than poor areas"; --- Modified "test method", increasing the "inspection rules"; --- Simplifying the "Packaging, transport and storage." The standard proposed by China National Light Industry Council. This standard by the National Leather Industry Standardization Technical Committee (SAC/TC252) centralized. This standard was drafted. bovine Co., China Leather and Footwear Industry Research Institute. The main drafters of this standard. Fan Huadong, Li Shiwei, Wuji Kui, Fan cocoa, Lee Construction. This standard replaces the standards previously issued as follows. --- GB/T 11759-1989. Leather1 ScopeThis standard specifies the classification and grading leather, testing methods, inspection rules and packaging, transportation and storage. This standard applies to after slaughter untreated or after only simple drying, freezing or after treatment, or after treatment salted, or through the appropriate When rawhide preservation process.2 classification and grading2.1 Quality Classification Cowhide quality classification according to Table 1. Table 1 quality classification in kilograms category Mass m1 Fresh skin (including skin fresh frozen) salt wet skin pale skin dry skin dry salt Minor leather (calfskin, calfskins) ≤20 ≤15 ≤10 ≤7 Lightweight leather (lighthides) 20 < m1 ≤25 15 < m1 ≤20 10 < m1 ≤15 7 < m1 ≤10 The amount of skin (mediumhides) 25 < m1 ≤30 20 < m1 ≤25 15 < m1 ≤20 10 < m1 ≤15 Paper weight (heavyhides) 30 < m1 ≤35 25 < m1 ≤30 20 < m1 ≤25 15 < m1 ≤20 Super Paper Weight (extraheavyhides) > 35 > 30 > 25 > 20 2.2 Area Classification Kraft classified by area are shown in Table 2. Table 2 floor space in square meters Class Size S Minor leather (calfskin, calfskins) ≤2.00 Small leather 2.00 < S≤2.56 Medium Leather 2.56 < S≤3.11 Large leather 3.11 < S≤4.00 Large leather > 4.00 2.3 Defect Classification 2.3.1 a A leather should meet the following requirements. --- Shaped skin intact, clean, well-corrosion treatment, no visible decay, hair loss; --- The main part of the neck, back, and so no holes, peeling and other obvious injuries disability, minor parts of the holes, peeling hurt no more than three, total disability An area of \u200b\u200bnot more than 10cm2; --- No mark. 2.3.2 two Two skins shall comply with the following provisions. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 11759-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 11759-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 11759-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 11759-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 11759-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 11759-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
