GB 22611-2008 English PDFUS$209.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB 22611-2008: [GB/T 22611-2008] Carbosulfan emulsifiable concentrates Status: Valid
Basic dataStandard ID: GB 22611-2008 (GB22611-2008)Description (Translated English): [GB/T 22611-2008] Carbosulfan emulsifiable concentrates Sector / Industry: National Standard Classification of Chinese Standard: G25 Classification of International Standard: 65.100.10 Word Count Estimation: 8,835 Date of Issue: 2008-12-17 Date of Implementation: 2009-06-01 Adopted Standard: FAO 417/EC/S/F-1991, MOD Regulation (derived from): Announcement of Newly Approved National Standards No. 21 of 2008 (No. 134 overall) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This Chinese standard specifies the carbosulfan EC requirements, test methods and marking, labeling, packaging, storage and transportation. This standard applies to the original drug with carbosulfan emulsifier dissolved in a suitable solvent in the preparation of carbosulfan EC. GB 22611-2008: [GB/T 22611-2008] Carbosulfan emulsifiable concentrates---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Carbosulfan emulsifiable concentrates ICS 65.100.10 G25 National Standards of People's Republic of China CARBOSULFAN EC Published 2008-12-17 2009-06-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China issued ForewordThis standard in Chapter 3, Section 5 is mandatory, the rest are recommended. This modification uses standard FAO Specification 417/EC/S/F (1991) "carbosulfan EC" (in English). This standard modification method using foreign advanced standards for the redrafted law. This standard and FAO specification "carbosulfan EC," the main technical differences. 1) The standard carbosulfan EC in two sizes, 20% of the mass fraction is 20.0 + 1.2-1.2,200g/L is the mass fraction 21.0 + 1.2-1.2, the concentration is 200 + 12-12, FAO specifications no specific concentration of emulsifiable concentrates, only the marked content ≤500g/kg The ± 5% emulsifiable concentrate of a predetermined fluctuation range, i.e., allow a marked content. 2) The standard control carbofuran impurity content is ≤0.5%, FAO specification is not larger than the content of carbosulfan measured 2%. 3) The standard moisture target of ≤0.5%, while the FAO specifications for ≤2g/kg (≤0.2%). 4) the actual situation overall quality of our products, pH values ranging from 7.0 to 9.0, while the FAO specification alkalinity indicators ≤1g/kg (≤0.1%). The standard proposed by China Petroleum and Chemical Industry Association. This standard by the National Pesticide Standardization Technical Committee (SAC/TC133). This standard is drafted. Shenyang Chemical Research Institute. Participated in the drafting of this standard. Hunan Haili Chemical Industry Co., Ltd., Zhejiang Hetian Chemical Co., Ltd., Jiangsu Changlong Chemical Co. the company. The main drafters of this standard. High Scenic, Zan Yan Kun, Zheng Jingyu, Han Ping, Zhang Zhongze, Chen Ping, Yu Shuying. CARBOSULFAN EC The active ingredient other product names, structural formulas and physicochemical parameters carbosulfan substantially as follows. ISO common name. Carbosulfan CIPAC Numeric Code. 417 Chemical name. 2,3-dihydro-2,2-dimethyl-7-yl (dibutylamino) methyl carbamate. Structure. Empirical formula. C20H32N2O3S Molecular weight. 380.5 (according to 2007 international relative atomic mass) Biological activity. insecticide Boiling point. 124 ℃ ~ 128 ℃ Vapor pressure (25 ℃). 0.041mPa Solubility (25 deg.] C). water 0.3mg/L, and most immiscible organic solvent, such as. xylene, n-hexane, chloroform, methylene chloride, ethyl Alcohol, methanol, acetone, etc. Stability. Hydrolysis, DT50 (25 ℃) in aqueous solution is less than in pure water 1h (pH4), 22h (pH6), 7.6d (pH7), 14.2d (PH8), 14.2d (pH8), greater than 58.3d (pH9) Range 1 This standard specifies the requirements EC carbosulfan, Test Method for marking, labeling, packaging, storage and transportation. This standard applies to the original drug carbosulfan formulated with emulsifying dissolved in a suitable solvent carbosulfan EC.2 Normative referencesTerms of the following documents become provisions of this standard by reference in this standard. For dated reference documents, all later Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to agreements based on this standard Whether the latest versions of these documents. For undated references, the latest version applies to this standard. GB/T 1600-2001 Pesticide moisture determination method Determination 1601 pH value pesticides GB/T GB/T 1603 Determination of emulsion stability of pesticide GB/T 1604 pesticide regulations for acceptance of goods GB/T 1605-2001 sampling commercial pesticides GB/T 4472 Chemical density, relative density General GB 4838 EC pesticide packaging GB T 19136 Determination of heat storage stability of pesticide / GB/T 19137 Pesticide low temperature stability determination 3.1 Composition and appearance This product shall be made compliant carbosulfan original drug, the appearance of a homogeneous liquid, no precipitates and suspended solids. 3.2 Technical Specifications EC carbosulfan should meet the requirements in Table 1. Table 1 EC carbosulfan control program Index project index 200g/L 20% Carbosulfan mass fraction a /% Or mass concentration (20 ℃) / (g/L) 21.0 + 1.2-1.2 + 12-12 200 20.0 + 1.2-1.2 Carbofuran mass fraction /% ≤ 0.5 Moisture content /% ≤ 0.5 The pH range of 7.0 to 9.0 Dilution stability (200-fold) Eligible Low temperature stability Qualified b B qualified thermal storage stability When a dispute occurs, to the mass fraction of carbosulfan arbitration. B When normal production, the low-temperature storage stability and thermal stability test, measured at least once every three months. Test Method 4 4.1 Sampling Carried out in GB/T 1605-2001 of "liquid formulation sampling" approach. Determining Sample packages with a random number table method; final sample size Not less than 250mL. 4.2 Identification Test HPLC --- This identification test can be carried out simultaneously with the measurement of the content of carbosulfan. In the same chromatographic operating conditions Next, a peak in the sample solution and the retention time of the standard solution carbosulfan peak retention time, which should be in the relative difference 1.5% or less. Determination of the mass fraction of 4.3 carbosulfan (carbofuran) 4.3.1 Method summary Sample was dissolved in methanol, methanol + water as the mobile phase, used as a filler AgilentTC-C18 stainless steel column and UV detector (280 nm), the sample carbosulfan reverse phase high performance liquid chromatography, external standard. 4.3.2 Reagents and solutions Methanol. HPLC grade; Water. The new secondary steam distilled water; Carbosulfan Sample. A known mass fraction ≥98.0%. Carbofuran Sample. A known mass fraction ≥99.0%. Carbofuran Preparation of standard solution. Weigh 0.05 g of carbofuran standard (accurate to 0.0002g) was placed in a 50mL volumetric flask, washed with methanol Dissolved and diluted to the mark. 4.3.3 Instruments HPLC. a variable wavelength UV detector; Chromatographic data processor or workstation; Column. 250mm × 4.6mm (. I.d) stainless steel column, built AgilentTC-C18,5μm filler (or with equivalent effect color Spectrum column); Filter. membrane pore size of about 0.45 m; Microsyringe. 50μL; Quantitative sampling tube. 5μL; Ultrasonic cleaning. 4.3.4 HPLC operating conditions Mobile phase. [Psi] (methanol. water) = 88.12, by membrane filtration, and degassing; Flow rate. 1.0mL/min; Column temperature. room temperature (temperature change should be less than 2 deg.] C); Detection wavelength. 280nm; Injection Volume. 5μL; Retention time. 3.6min carbofuran, carbosulfan 13.8min. Are typical operating parameters of the above, according to the characteristics of different instruments, for a given operating parameters appropriately adjusted to obtain the best result. A typical carbosulfan EC shown in Figure 1 HPLC. 1 --- carbofuran; 2 --- carbosulfan. Figure 1 HPLC carbosulfan EC 4.3.5 Determination Step 4.3.5.1 Preparation of standard solution Weigh 0.1 g of carbosulfan standard (accurate to 0.0002g), a 50mL volumetric flask, dissolve and dilute to volume with methanol, Shake well. Pipette accurately pipetted solution is placed above another 10mL 50mL volumetric flask, and then another 2mL pipette take g Budweiser standard solution in the same volumetric flask, dilute to volume with methanol, shake. 4.3.5.2 Preparation of sample solution Weigh containing 0.1 g of carbosulfan (accurate to 0.0002g) sample, placed in a 50mL volumetric flask, dilute to volume with methanol, shake uniform. Pipette accurately pipetted solution is placed above another 10mL 50mL volumetric flask, diluted with methanol to the mark. 4.3.5.3 Determination Under the above operating conditions, after the instrument is stable, the number of consecutive doses of the standard solution is injected until the needle carbosulfan two adjacent opposing peak area After the change is less than 1.0%, measured according to the standard solution, sample solution, the sample solution, the order of standard solution. 4.3.6 computing The two doses of the standard peak area was measured before and after the two needles in the sample solution and a sample carbosulfan (carbofuran peak area) were Averaged. Sample carbosulfan (carbofuran) is a mass fraction (%), calculated according to formula (1); mass concentration ρ1 (g/L) according to formula (2) Calculation. 1 = A2 (1) ρ1 = 10 (2) Where. A1 --- the standard solution, a peak area carbosulfan (carbofuran peak area) is calculated; A2 --- sample solution, carbosulfan peak area (carbofuran peak area) is calculated; --- standard samples carbosulfan (carbofuran) mass fraction, expressed in%; When the density of the sample ρ --- 20 ℃, in units of grams per milliliter (g/mL) (according to GB/T 4472 of "densimeter method" is measured). 4.3.7 allows poor Carbosulfan content, the concentration difference between the two measured parallel Results are to be no greater than 0.8%, 8g/L, the mass fraction of carbofuran Two parallel results of measurement of the relative deviation should be less than 20%, and the arithmetic mean value as a measurement result. 4.4 Determination of Moisture According to the 1600-2001 "Karl Fischer" method GB/T in "2.1.2 Karl Fischer - coulometric titration instrument measurement method". Carried out in GB/T 1601. 4.6 Emulsion Stability Test Standard hard water sample was diluted 200-fold, according to GB/T 1603 were tested, without the oil slick, no precipitation under qualified. 4.7 Low temperature stability test Press 19137 of "emulsions and a homogeneous liquid formulation" GB/T performed. Volume bottom of the centrifuge tube does not exceed the educt 0.3mL qualified. Thermal storage stability test 4.8 According to GB/T 19136 of "liquid formulation" performed. After the heat storage, carbosulfan content should not be less than the measured front heat storage mass fraction 95%; emulsion stability should still meet the standards. 4.9 product testing and acceptance Shall comply with the provisions of GB/T 1604's. Process limit values, the comparison value using the rounding method. 5 marking, labeling, packaging, storage and transportation 5.1 carbosulfan EC mark, labeling, packaging, should comply with the provisions of GB 4838. 5.2 carbosulfan EC polyester bottles or polyethylene bottles, bottle net content of 250 mL, 500 mL, packed in cardboard boxes, W Leng cardboard box or Plastic boxes each containing a net content not exceeding 10kg. 5.3 According to user requirements or ordering agreement, other forms of packaging, it should comply with the provisions of GB 4838. 5.4 carbosulfan EC package airiness, dry place. 5.5 storage and transportation to prevent moisture and sunlight, no food, seed, feed mix, avoid contact with skin, eyes, nose and mouth to prevent inhalation. 5.6 Security. CARBOSULFAN is moderately toxic pesticides. The FDA should wear protective gloves, wear clean protective clothing. Immediately after application Wash with soap and water. When liquid such as skin and eye contact, use plenty of water. Such as poisoning occurs, it is timely to hospital for treatment. 5.7 Warranty. Under the provisions of storage and transportation conditions, carbosulfan EC warranty period, counting from the date of manufacture 2 years. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB 22611-2008_English be delivered?Answer: Upon your order, we will start to translate GB 22611-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB 22611-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB 22611-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
