GB 21657-2008 English PDF

US$239.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB 21657-2008: Code of dust control in the compounding workshop of the rubber manufacture
Status: Obsolete

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB 21657-2008	239	Add to Cart	3 days	Code of dust control in the compounding workshop of the rubber manufacture	Obsolete

Similar standards

GB/T 22038   GB/T 23657   GB/T 22391   GB/T 26732   GB/T 45291   GB/T 14646   

Basic data

Standard ID: GB 21657-2008 (GB21657-2008)
Description (Translated English): Code of dust control in the compounding workshop of the rubber manufacture
Sector / Industry: National Standard
Classification of Chinese Standard: G41
Classification of International Standard: 83.160.01
Word Count Estimation: 6,626
Date of Issue: 2008-04-22
Date of Implementation: 2008-11-01
Quoted Standard: GB 16297
Regulation (derived from): Announcement of Newly Approved National Standards No. 6 of 2008 (total 119)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This Chinese standard specifies the mixing plant in the production of rubber processing terms and definitions dust, dust generation and major hazards arising, requirements, measures to prevent dust hazards, hazard management measures to prevent dust, dust is detected. This standard applies to all kinds of rubber processing rubber mixing plant engineering, management and rubber machinery product design, installation tuning and manufacturing.

GB 21657-2008: Code of dust control in the compounding workshop of the rubber manufacture

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Code of dust control in the compounding workshop of the rubber manufacture ICS 83.160.01 G41 National Standards of People's Republic of China Regulations of dust mixing rubber processing plant Posted 2008-04-22 2008-11-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

The standard Chapter 5, Chapter 6, Chapter 7 are mandatory, the rest are recommended. This standard was proposed by the State Administration of Work Safety. This standard produced by the National Standardization Technical Committee on Security. This standard is mainly responsible for drafting unit. Beijing Rubber Industry Research and Design Institute, Haohua Engineering Limited. The main drafters of this standard. Li Guijun, Zangqing Li, Li Guohong, Zhaoxue Rong, Xu Weichun, Jiangzhong Qin, Leroy Chang. Regulations of dust mixing rubber processing plant

1 Scope

This standard specifies the terms and definitions of the main hazards in the production of rubber processing plant mixing dust, dust generation and generation, and to Seeking measures to prevent dust hazards, control measures to prevent dust hazards, dust detection. This standard applies to project design, management and product design all kinds of rubber machinery rubber processing rubber mixing plant, installation and manufacturing.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB 16297 Air Pollutant Emission Standards

3 Terms and Definitions

3.1 Mixing the dust flying in the process floor space of various organic and inorganic powder complexing agent. 3.2 Improve the supply of production, the working environment of fresh outdoor air and local exhaust ventilation local exhaust dirty air and dust contained in the air Clean indoor air to be discharged from the dusty air, in order to create a safe, sanitary conditions of the ventilation system. 3.3 The dust cover, vent pipe, dust collector, fan and other components, can be directly discharged dust directly from the generating source, air and dust After purification into the atmosphere, to prevent dust pollution of the environment inside and outside the workshop ventilation system. 3.4 By the exhaust hood, exhaust pipe, exhaust fan and other components, can be directly discharged dust directly from the generating source, to prevent the pollution of air operations around ventilation system. 3.5 An apparatus capable of dusty air purification treatment.

4 main hazards of dust generation and generation

4.1 dust generation a) carbon black in the solution package, transport, weighing, mixing materials to produce carbon black dust cast process. b) powder dust generated in other ingredients, weighing and mixing process. The main hazards of dust generated 4.2 Mixing rubber dust generated during the production of lung disease caused by the human body, can lead to black and mixed pneumoconiosis pneumoconiosis, affect the human body health.

5 Requirements

5.1 new construction, renovation and expansion of business site location should be away from residential areas, schools, hospitals and densely populated areas, and is located in the protected object The summer wind windward side of the minimum frequency shall set a reasonable CHP perennial dominant wind direction between the downwind side, businesses and residential areas distance. 5.2 mixing plant should be located in buildings other plant perennial dominant wind downwind side. 5.3 Selecting advanced production technology, the process should be closed and automation. Workshop dust ventilation should be within 5.4 measure dust purification after reaching GB 16297 emissions requirements. 5.5 workplace air of carbon black dust, other dust allowable concentrations of 4mg/m3 and 8mg/m3. 5.6 in the workshop storage bags, crates, barrels of powder should be stored in a predetermined place, the storage location must be clearly marked. 5.7 workshop walls, ceiling and floor should be smooth, easy to clean. Forbidden to use compressed air blowing, sweeping dust. Never use water to rinse Face, mobile cleaning equipment should be used. 5.8 workshop should be located lounge, cloakroom, changing rooms, showers, baths should not be located. Overalls, casual sub-cabinet; lounge positive. shower, Number of urinals, etc. should be set according to the number of workers and the sex ratio. 5.9 room should be kept clean, fresh air. Food and utensils should be placed in the lounge. 5.10 cloakroom, lounge, toilets or wash sink manual switch means automatic switch should be set in place. 5.11 Cleaning System maintenance should be regularly cleaned to determine the period.

6 measures to prevent dust hazards

6.1 parts of carbon black from feeding to feeding mixing should be used for custody transfer (such as pneumatic conveying, etc.), automatic weighing, automatic feeding device. 6.2 should adopt the granulated carbon black, carbon black, carbon black, should adopt the package space and tanker transport. Unpacking feeding should be located at the dust removal system, the solution should be a single charter Single room, keeping a negative pressure. Waste bag storage areas clearly marked and packaging facilities, to prevent the transit of carbon black dust scattered implement waste Bags recycling options. 6.3 powder processing and ingredients should be in a separate room, the place of operation should be located dust removal system. When the mix reaches 10000t/a, with a small material Material should adopt the automatic weighing. 6.4 When the open mill for mixing should take stringent dust control measures. The auxiliary mixer, cutting pipe and other dust generating sources should be located at the dust removal system. 6.5 mixer when artificial feeding, such as carbon black powder should be used polyethylene packaging in bags into the machine. 6.6 tableting machine should be in accordance with national emission standards for dust, dust and exhaust port height selection. 6.7 air inlet should be located on the upwind side of the perennial dominant wind direction, and the horizontal distance between the air inlet and exhaust outlet should be greater than 10m, higher than the inlet air vents Mouth 6m above. 6.8 Personal hygiene and protection 6.8.1 artificial ingredients, when feeding and maintenance of dust removal system and the exhaust system, the operator should wear good particle respirator, gloves, dust-proof overalls And other personal protective equipment. 6.8.2 should be the proper use of personal protective equipment and regular cleaning to keep clean. 6.8.3 prohibited in pre-production premises diet, diet should wash their hands, gargle. 6.8.4 site operators are not allowed to wear uniforms leave the production area.

7 management measures to prevent dust hazards

7.1 new construction, expansion and renovation of rubber processing enterprises should be dust-proof ventilation facilities with the main project designed, constructed and put into operation use. 7.2 Enterprises should establish technical measures for dust control plan, improve dust control measures to make the workplace air concentration of dust and exhaust emissions Concentration reached the national standard. 7.3 enterprises should establish and improve management mechanism dust, dust with a full-time management staff, specifically responsible for the management and technical measures Dust Dust Work The implementation of the project facilities. 7.4 enterprise should develop the necessary rules and regulations and dust accident emergency plan, and conscientiously implemented. 7.5 Periodic testing workshop dust concentration in the air, and the result is the archives. Health checks should be carried out prior to 7.6 workers exposed to dust jobs transferred positions, usually should be regularly inspected and set up health files for those not suited We shall arrange appropriate work. 7.7 regularly organize workers to learn the knowledge of the job and the relevant provisions of the dust, and check the performance.

8 Dust Detection

Objective 8.1 Dust test --- Degree of hazard analysis; --- Study precautions. 8.2 Test items and methods 8.2.1 dust in the air concentration should be measured using the filter method. The main job of detecting at least once a month, finishing the test results should be archived, and is scheduled to Reports to the authorities. 8.2.2 should be tested once every quarter dust effect, reach the design requirements should be timely maintenance and improvement work. 8.2.3 rubber mixing plant processing units shall adopt implementing rules in accordance with the present regulations. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB 21657-2008_English be delivered?

Answer: Upon your order, we will start to translate GB 21657-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB 21657-2008_English with my colleagues?

Answer: Yes. The purchased PDF of GB 21657-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.