YS/T 575.4-2007 PDF English
US$90.00 · In stock · Download in 9 secondsYS/T 575.4-2007: Methods for chemical analysis of bauxite. Part 4: Determination of iron oxide content. Dichromate titrimetric method Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid YS/T 575.4: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| YS/T 575.4-2007 | English | 90 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Methods for chemical analysis of bauxite. Part 4: Determination of iron oxide content. Dichromate titrimetric method
| Valid |
| YS/T 575.4-2006 | English | 239 |
Add to Cart
|
2 days
|
Methods for chemical analysis of bauxite. Determination of iron oxide content. Dichromate titrimetric method
| Obsolete |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: YS/T 575.4-2007
YS/T 575.4-2007: Methods for chemical analysis of bauxite. Part 4: Determination of iron oxide content. Dichromate titrimetric method
---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/YST575.4-2007
NON-FERROUS METAL INDUSTRY STANDARD
OF THE PEOPLE’S REPUBLIC OF CHINA
ICS 71.100.10
Q 52
Replacing YS/T 575.4-2006
Methods for chemical analysis of bauxite - Part 4:
Determination of iron oxide content - Potassium
titrimetric method
ISSUED ON: NOVEMBER 14, 2007
IMPLEMENTED ON: MAY 01, 2008
Issued by: National Development and Reform Commission
Table of Contents
Foreword ... 3
1 Scope ... 6
2 Method principle ... 6
3 Reagents ... 6
4 Specimen ... 7
5 Analysis steps ... 7
6 Calculation of analysis result ... 8
7 Precision ... 9
8 Quality assurance and control ... 9
Foreword
YS/T 575-2007 “Methods for chemical analysis of bauxite” is a modification to
YS/T 575-2006 (formerly GB/T 3257-1999). It has 24 parts in total:
- Part 1: Determination of aluminum oxide content - EDTA titrimetric method;
- Part 2: Determination of silicon dioxide content - Gravimetric-molybdenum
blue photometric method;
- Part 3: Determination of silicon dioxide content - Molybdenum blue
photometric method;
- Part 4: Determination of iron oxide content - Potassium titrimetric method;
- Part 5: Determination of iron oxide content - Orthophenanthroline
photometric method;
- Part 6: Determination of titanium dioxide content - Diantipyrylmethane
photometric method;
- Part 7: Determination of calcium oxide content - Flame atomic absorption
spectrophotometric method;
- Part 8: Determination of magnesium oxide content - Flame atomic
absorption spectrophotometric method;
- Part 9: Determination of potassium oxide, sodium oxide content - Flame
atomic absorption spectrophotometric method;
- Part 10: Determination of manganese oxide content - Flame atomic
absorption spectrophotometric method;
- Part 11: Determination of chromium oxide content - Flame atomic
absorption spectrophotometric method;
- Part 12: Determination of vanadium pentoxide content - N-benzoyl-N-
phenylhydroxylamine photometric method;
- Part 13: Determination of zinc content - Flame atomic absorption
spectrophotometric method;
- Part 14: Determination the total content of rare earth oxide Tribromo-
arsenazo photometric method;
- Part 15: Determination of gallium oxide content - Rhodamine B-extraction
photometric method;
Methods for chemical analysis of bauxite - Part 4:
Determination of iron oxide content - Potassium
titrimetric method
1 Scope
This Part specifies the determination method of iron oxide content in bauxite.
This Part is applicable to the determination of iron oxide content in bauxite. The
determination range is ≥5.00%.
2 Method principle
In the hydrochloric acid medium, use tin dichloride to reduce most trivalent iron.
Use sodium tungstate as indicator. Add titanium trichloride in drops to reduce
the remaining trivalent iron as divalent iron. Use excessive titanium trichloride
to further reduce tungstate to generate “tungsten blue”. Then add potassium
dichromate in drops till blue disappears. Use sodium dibenzamide as indicator.
Use potassium dichromate standard solution to titrate ferrous iron.
Vanadium interference. In the titration solution, vanadium pentoxide below
0.6mg is allowed.
3 Reagents
3.1 Potassium hydroxide.
3.2 Sodium peroxide.
3.3 Hydrochloric acid (ρ1.19g/mL).
3.4 Hydrochloric acid (1+1).
3.5 Hydrochloric acid (1+9).
3.6 Sulfuric acid (ρ1.84g/mL).
3.7 Phosphoric acid (ρ1.70g/mL).
3.8 Sulfuric acid-phosphoric acid mixed solution: Under stirring, slowly add
200mL of sulfuric acid (3.6) into 500mL of water. Then add 300mL of phosphoric
make the melt adhere to the inner wall of the crucible evenly. Cool.
5.3.2 Place the silver crucible in a 250mL beaker. Add 30mL of hot water. After
the molten material falls off, use hydrochloric acid (3.5) and hot water to wash
the crucible. Add 25mL of hydrochloric acid (3.3). Cover the watch glass. Heat
to completely boil. Add tin dichloride solution (3.11) in drops till light yellow. Add
water to about 100mL. Add 1mL of sodium tungstate solution (3.12). Add
titanium trichloride solution (3.10) in drops till blue just appears. Then
immediately use potassium dichromate standard solution (3.15) to titrate till it is
colorless (without reading).
NOTE: The blank test shall be heated and boiled to remove hydrogen peroxide before the
acidification of hydrochloric acid.
5.3.3 Immediately add 10mL of sulfuric acid-phosphoric acid mixed solution (3.8)
and 4 drops of diphenylamine sulfonate indicator solution (3.13). Use potassium
dichromate standard solution (3.15) to add in drops till purple blue is stable,
which shall be the end.
5.3.4 Reagent blank shall be operated according to the analysis steps in
5.3.1~5.3.2. But in (5.3.3), before sulfuric acid-phosphoric acid mixed solution
is added, add 5.00mL of ferrous ammonium sulfate solution (3.14) first. The
volume of potassium dichromate standard (3.15) used is A. Then add 5.00mL
of ferrous ammonium sulfate solution (3.14) into the solution. Still use
potassium dichromate standard solution (3.15) to titrate to the end. Record the
volume as B. Repeat adding ferrous ammonium sulfate solution (3.14). Use
potassium dichromate standard solution (3.15) to titrate. When B value is a
certain constant value, A-B shall be the volume (V0) of potassium dichromate
standard solution (3.15) used by the blank.
6 Calculation of analysis result
Calculate the mass fraction (%) of ferric oxide according to the following formula:
Where,
V - Volume of potassium dichromate standard titration solution consumed
during titration of test portion solution, in milliliters (mL);
V0 - Volume of potassium dichromate standard titration solution consumed
during titration of blank solution, in milliliters (mL);
c - Actual concentration of potassium dichromate standard solution, in Moles
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of YS/T 575.4-2007 be delivered?Answer: The full copy PDF of English version of YS/T 575.4-2007 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of YS/T 575.4-2007_English with my colleagues?Answer: Yes. The purchased PDF of YS/T 575.4-2007_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- YS/T 575.4-2007 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. Question 5: Should I purchase the latest version YS/T 575.4-2007?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version YS/T 575.4-2007 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. How to buy and download a true PDF of English version of YS/T 575.4-2007?A step-by-step guide to download PDF of YS/T 575.4-2007_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "YS/T 575.4-2007".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|