HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

YS/T 252.6-2020 PDF English

US$125.00 · In stock · Download in 9 seconds
YS/T 252.6-2020: Methods for chemical analysis of nickel matte - Part 6: Determination of lead, zinc and arsenic contents - Inductively coupled plasma atomic emission spectrometry
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Status: Valid
Standard IDContents [version]USDSTEP2[PDF] deliveryName of Chinese StandardStatus
YS/T 252.6-2020English125 Add to Cart 0-9 seconds. Auto-delivery Methods for chemical analysis of nickel matte - Part 6: Determination of lead, zinc and arsenic contents - Inductively coupled plasma atomic emission spectrometry Valid

Excerpted PDFs (Download full copy in 9 seconds upon purchase)

PDF Preview: YS/T 252.6-2020
      

Similar standards

GB/T 3884.2   GB/T 3884.1   YS/T 349.2   

YS/T 252.6-2020: Methods for chemical analysis of nickel matte - Part 6: Determination of lead, zinc and arsenic contents - Inductively coupled plasma atomic emission spectrometry


---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/YST252.6-2020
YS NONFERROUS INDUSTRY STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 77.120.40 H 13 Methods for chemical analysis of nickel matte - Part 6: Determination of lead, zinc and arsenic contents - Inductively coupled plasma atomic emission spectrometry ISSUED ON: APRIL 16, 2020 IMPLEMENTED ON: OCTOBER 01, 2020 Issued by: Ministry of Industry and Information Technology of PRC

Table of Contents

Foreword ... 3 1 Scope ... 5 2 Method summary ... 5 3 Reagents ... 5 4 Instruments ... 6 5 Samples ... 7 6 Test steps ... 7 7 Test data processing ... 8 8 Precision ... 8 9 Test report ... 9

Foreword

YS/T 252 "Methods for chemical analysis of nickel matte" is divided into 8 parts: - Part 1: Determination of nickel content - Dimethylglyoxime gravimetric method - Part 2: Determination of iron content - Sulfosalicylic acid photometric method - Part 3: Determination of cobalt content - Flame atomic absorption spectrometric method - Part 4: Determination of cobalt content - Sodium thiosulphate titrimetric method - Part 5: Determination of sulfur content - Combustion-neutralization titrimetric method - Part 6: Determination of lead, zinc and arsenic contents - Inductively coupled plasma atomic emission spectrometry - Part 7: Determination of silver content - Flame atomic absorption spectrometry - Part 8: Determination of gold, platinum and palladium contents - Fire assay collection-inductively coupled plasma atomic emission spectrometry This Part is Part 6 of YS/T 252. This Part was drafted in accordance with the rules given in GB/T 1.1-2009. This Part was proposed by AND shall be under the jurisdiction of the National Nonferrous Metals Standardization Technical Committee (SAC/TC 243). Drafting organizations of this Part: Jinchuan Group Co., Ltd., Beijing Mineral Inspection Technology Co., Ltd., GB (Beijing) Inspection and Certification Co., Ltd., Guangdong Industrial Analysis and Testing Center, Liaoning Entry-Exit Inspection and Quarantine Bureau Inspection and Quarantine Technology Center, Guangxi Zhuang Autonomous Region Metallurgical Products Quality Inspection Station, Lanzhou Jinchuan New Material Technology Co., Ltd., Shandong Hengbang Smelting Co., Ltd., Changsha Mining and Metallurgy Research Institute Co., Ltd., Guizhou Institute of Analysis and Testing, Guangxi CCIC Testing Technology Service Co., Ltd., Zhejiang Huayou Cobalt Industry Co., Ltd., Zhejiang Yatong Welding Materials Co., Ltd., Emeishan Eban High Purity Materials Co., Ltd., Guangxi Zhuang Autonomous Region Analysis and Testing Research Center. The main drafters of this Part: Yu Shengjie, Ren Lihua, Liu Shihe, Xie Yang, Luo Haixia, Fang Di, Wang Zhengqiang, Wang Changhua, Mo Shumin, Zhao Chunlei, Xie Hui, Zhang Ting, Zhou Zhiping, Li Yan, Nie Xiaoming, Wei Li, Xu Yanyan, Zhu Guozhong , Ma Qun, Song Jianwei, Ni Yuyan, Yang Binghong, Cui Hao, Guan Hongsu, Jiang Jing, Methods for chemical analysis of nickel matte - Part 6: Determination of lead, zinc and arsenic contents - Inductively coupled plasma atomic emission spectrometry

1 Scope

This Part specifies methods for the determination of lead, zinc, arsenic content in high nickel matte. This Part applies to the determination of lead, zinc, arsenic content in high nickel matte. The measurement range is as shown in Table 1.

2 Method summary

The sample is decomposed with hydrochloric acid, nitric acid, perchloric acid. In dilute hydrochloric acid medium, the emission intensity of each element is measured on an inductively coupled plasma atomic emission spectrometer. The contents of lead, zinc, arsenic are calculated according to the working curve method.

3 Reagents

Unless otherwise stated, only reagents confirmed to be of superior purity are used in the analysis. All water used is water of grade-2 purity or above. 3.1 Hydrochloric acid (ρ = 1.19 g/mL). 3.2 Nitric acid (ρ = 1.42 g/mL). 3.3 Perchloric acid (ρ = 1.84 g/mL). 3.4 Hydrochloric acid (1 + 1). 3.5 Nitric acid (1 + 1).

5 Samples

5.1 The particle size of the sample shall not be greater than 154 μm. 5.2 The sample is pre-dried at 105 °C ± 5 °C for 2 hours, placed in a desiccator to cool to room temperature for later use.

6 Test steps

6.1 Sample Weigh 0.20 g of sample, accurate to 0.0001 g. 6.2 Parallel test Conduct two tests in parallel, 6.3 Blank test Do a blank test along with the sample. 6.4 Determination 6.4.1 Place the sample (6.1) in a 300 mL beaker. Add 15 mL of hydrochloric acid (3.1), 5 mL of nitric acid (3.2), 2 mL of perchloric acid (3.3). Heat at low temperature until the sample is completely dissolved. Continue heating. When the white smoke is gone, evaporate the test solution to dryness, then remove and cool it to room temperature. Add 5 mL of hydrochloric acid (3.1). Rinse the watch plate and cup wall with a small amount of water. Heat to dissolve the salt. Remove and cool. Transfer the test solution into a 200 mL volumetric flask. Use water to dilute it to volume. Mix well. 6.4.2 On the inductively coupled plasma atomic emission spectrometer, at the selected analysis spectrum line, measure the emission intensity of each element to be measured in the test solution (6.4.1) and the accompanying sample blank solution (6.3), simultaneously with the standard solution series. Calculate the blank-corrected mass concentration of each measured element from the working curve. 6.5 Drawing of working curve Dilute the lead, zinc, arsenic standard storage solutions (3.8 ~ 3.10) step by step respectively. Prepare a series of mixed standard solutions of lead, zinc, arsenic according to Table 3. On an inductively coupled plasma atomic emission spectrometer, measure the emission intensity of lead, zinc, arsenic in a mixed series of standard solutions, at the selected analysis spectral line. Draw the working curve, using the mass concentration of the element being measured as the abscissa and the emission intensity as the ordinate. ......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.


      

Tips & Frequently Asked Questions

Question 1: How long will the true-PDF of English version of YS/T 252.6-2020 be delivered?

Answer: The full copy PDF of English version of YS/T 252.6-2020 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.

Question 2: Can I share the purchased PDF of YS/T 252.6-2020_English with my colleagues?

Answer: Yes. The purchased PDF of YS/T 252.6-2020_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. www.ChineseStandard.us -- YS/T 252.6-2020 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.

How to buy and download a true PDF of English version of YS/T 252.6-2020?

A step-by-step guide to download PDF of YS/T 252.6-2020_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "YS/T 252.6-2020".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3    Steps 4~6    Step 7    Step 8    Step 9