YB/T 4159-2007 PDF English
US$70.00 · In stock · Download in 9 secondsYB/T 4159-2007: Hot rolling checker plate and strip Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Obsolete
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| YB/T 4159-2007 | English | 70 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Hot rolling checker plate and strip
| Obsolete |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: YB/T 4159-2007
YB/T 4159-2007: Hot rolling checker plate and strip---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/YBT4159-2007
YB
FERROUS METALLURGY INDUSTRY STANDARD
ICS 77.140.50
H 46
Hot rolling checker plate and strip
Issued on. JANUARY 25, 2007
Implemented on. JULY 01, 2007
Issued by. National Development and Reform Commission of PRC
Table of Contents
Foreword... 3
1 Scope... 4
2 Normative references... 4
3 Classification and code... 5
4 Ordering information... 5
5 Size, shape, weight and tolerance... 6
6 Technical requirements... 9
7 Test methods... 10
8 Inspection rules... 11
9 Packaging, marking, quality certificate... 11
Appendix A (Informative) Theoretical weighting method for hot rolled steel
checker plate... 12
Foreword
Appendix A of this standard is informative.
This standard was proposed by the China Iron and Steel Association.
This standard shall be under the jurisdiction of the National Steel
Standardization Technical Committee.
Drafting organizations of this standard. Benxi Iron and Steel (Group) Co., Ltd.,
Metallurgical Industry Information Standards Institute.
The main drafters of this standard. Zhang Xianfeng, Li Yiwei, Huang Ying, Li
Hongbin.
Hot rolling checker plate and strip
1 Scope
This standard specifies the classification and code, the information required for
ordering, size, shape, weight and tolerance, technical requirements, test
methods, inspection rules, packaging, marking, quality certificate of hot-rolled
steel checker plate and strip.
This standard applies to diamond-shaped, lentil-shaped, round-bean-shaped
and combined-shaped hot-rolled steel checker plate and strip (hereinafter
referred to as steel plates and steel strips).
2 Normative references
The provisions in following documents become the provisions of this standard
through reference in this standard. For the dated references, the subsequent
amendments (excluding corrections) or revisions do not apply to this standard;
however, parties who reach an agreement based on this standard are
encouraged to study if the latest versions of these documents are applicable.
For undated references, the latest edition of the referenced document applies.
GB/T 222 Permissible tolerances for chemical composition of steel products
GB/T 223 Steel, iron and alloy - Chemical analysis method
GB/T 228 Metallic materials – Tensile testing at ambient temperature (GB/T
228-2002, eqv ISO 6892.1998)
GB/T 232 Metallic materials - Bend test (GB/T 232-1999, eqv ISO 7438.1985)
GB/T 247 General rule of package mark and certification for steel plates
(sheets) and strips
GB/T 700 Carbon structural steels
GB/T 709 Dimensions, shape, weight and tolerances for hot rolled steel
sheets and strips
GB 712 Ship and ocean engineering structural steel
3 Classification and code
3.1 Classified by edge status.
4 Ordering information
When ordering, the user shall provide the following information.
5 Size, shape, weight and tolerance
5.1 The sizes of steel plates and strips are as specified in Table 1.
5.2 The size, shape and distribution of steel plate and steel strip’s pattern are
reference values, as shown in Figure 1 ~ Figure 4.The sizes in the Figure are
used for control during processing and rolling by the manufacturer, they shall
not be used as the basis for the inspection of finished steel plates and strips.
shall comply with the requirements of Table 2.The tolerance of the intermediate
size is as specified by the tolerance of the adjacent larger size, the pattern
height of the intermediate size is as specified by the tolerance of the adjacent
smaller size.
5.5 Other sizes and shapes of steel plates and steel strips shall comply with the
requirements of GB/T 709.
5.6 Steel plates and strips are delivered at actual weight. According to the
requirements of the purchaser, the steel plate may be delivered at theoretical
weight according to Appendix A of this standard.
6 Technical requirements
6.1 Designation and chemical composition
6.2 Delivery status
6.2.1 Steel plates and strips are delivered in hot-rolled status.
6.2.2 Steel plates and steel strips are usually supplied in a non-edge-cut status.
As required by the purchaser and indicated in the contract, it may also supply
it in an edge-cut status.
6.3 Mechanical properties
As required by the purchaser and indicated in the contract, it may perform
Thickness Unevenness Measured length
tensile and bending tests. The performance indicators shall comply with the
provisions of GB/T 700, GB 712, GB/T 4171 or as agreed by both parties.
6.4 Surface quality
7 Test methods
7.1 The appearance of steel plates and strips are visually-checked. The size
and shape are measured by a suitable tool.
7.3 The inspection items, sampling quantities, sampling methods and test
methods for each batch of steel shall comply with the requirements of Table 4.
8 Inspection rules
8.1 Inspection and acceptance of steel plates and strips shall be carried out by
the technical supervision department of the supplier.
8.3 The numerical rounding-off of the inspection data shall be carried out in
accordance with the provisions of YB/T 081.
8.4 Re-inspection
The re-inspection of steel plates and strips shall be carried out in accordance
with the provisions of GB/T 247.
9 Packaging, marking, quality certificate
The packaging, marking, quality certificate of steel plates and steel strips shall
comply with the provisions of GB/T 247.
Appendix A
(Informative)
Theoretical weighting method for hot rolled steel checker plate
A.1 For the steel checker plates which are delivered according to Figure 1 ~
Figure 4 of this standard, the theoretical weighting method is as shown in Table
A.1.
YB/T 4159-2007
YB
FERROUS METALLURGY INDUSTRY STANDARD
ICS 77.140.50
H 46
Hot rolling checker plate and strip
Issued on. JANUARY 25, 2007
Implemented on. JULY 01, 2007
Issued by. National Development and Reform Commission of PRC
Table of Contents
Foreword... 3
1 Scope... 4
2 Normative references... 4
3 Classification and code... 5
4 Ordering information... 5
5 Size, shape, weight and tolerance... 6
6 Technical requirements... 9
7 Test methods... 10
8 Inspection rules... 11
9 Packaging, marking, quality certificate... 11
Appendix A (Informative) Theoretical weighting method for hot rolled steel
checker plate... 12
Foreword
Appendix A of this standard is informative.
This standard was proposed by the China Iron and Steel Association.
This standard shall be under the jurisdiction of the National Steel
Standardization Technical Committee.
Drafting organizations of this standard. Benxi Iron and Steel (Group) Co., Ltd.,
Metallurgical Industry Information Standards Institute.
The main drafters of this standard. Zhang Xianfeng, Li Yiwei, Huang Ying, Li
Hongbin.
Hot rolling checker plate and strip
1 Scope
This standard specifies the classification and code, the information required for
ordering, size, shape, weight and tolerance, technical requirements, test
methods, inspection rules, packaging, marking, quality certificate of hot-rolled
steel checker plate and strip.
This standard applies to diamond-shaped, lentil-shaped, round-bean-shaped
and combined-shaped hot-rolled steel checker plate and strip (hereinafter
referred to as steel plates and steel strips).
2 Normative references
The provisions in following documents become the provisions of this standard
through reference in this standard. For the dated references, the subsequent
amendments (excluding corrections) or revisions do not apply to this standard;
however, parties who reach an agreement based on this standard are
encouraged to study if the latest versions of these documents are applicable.
For undated references, the latest edition of the referenced document applies.
GB/T 222 Permissible tolerances for chemical composition of steel products
GB/T 223 Steel, iron and alloy - Chemical analysis method
GB/T 228 Metallic materials – Tensile testing at ambient temperature (GB/T
228-2002, eqv ISO 6892.1998)
GB/T 232 Metallic materials - Bend test (GB/T 232-1999, eqv ISO 7438.1985)
GB/T 247 General rule of package mark and certification for steel plates
(sheets) and strips
GB/T 700 Carbon structural steels
GB/T 709 Dimensions, shape, weight and tolerances for hot rolled steel
sheets and strips
GB 712 Ship and ocean engineering structural steel
3 Classification and code
3.1 Classified by edge status.
4 Ordering information
When ordering, the user shall provide the following information.
5 Size, shape, weight and tolerance
5.1 The sizes of steel plates and strips are as specified in Table 1.
5.2 The size, shape and distribution of steel plate and steel strip’s pattern are
reference values, as shown in Figure 1 ~ Figure 4.The sizes in the Figure are
used for control during processing and rolling by the manufacturer, they shall
not be used as the basis for the inspection of finished steel plates and strips.
shall comply with the requirements of Table 2.The tolerance of the intermediate
size is as specified by the tolerance of the adjacent larger size, the pattern
height of the intermediate size is as specified by the tolerance of the adjacent
smaller size.
5.5 Other sizes and shapes of steel plates and steel strips shall comply with the
requirements of GB/T 709.
5.6 Steel plates and strips are delivered at actual weight. According to the
requirements of the purchaser, the steel plate may be delivered at theoretical
weight according to Appendix A of this standard.
6 Technical requirements
6.1 Designation and chemical composition
6.2 Delivery status
6.2.1 Steel plates and strips are delivered in hot-rolled status.
6.2.2 Steel plates and steel strips are usually supplied in a non-edge-cut status.
As required by the purchaser and indicated in the contract, it may also supply
it in an edge-cut status.
6.3 Mechanical properties
As required by the purchaser and indicated in the contract, it may perform
Thickness Unevenness Measured length
tensile and bending tests. The performance indicators shall comply with the
provisions of GB/T 700, GB 712, GB/T 4171 or as agreed by both parties.
6.4 Surface quality
7 Test methods
7.1 The appearance of steel plates and strips are visually-checked. The size
and shape are measured by a suitable tool.
7.3 The inspection items, sampling quantities, sampling methods and test
methods for each batch of steel shall comply with the requirements of Table 4.
8 Inspection rules
8.1 Inspection and acceptance of steel plates and strips shall be carried out by
the technical supervision department of the supplier.
8.3 The numerical rounding-off of the inspection data shall be carried out in
accordance with the provisions of YB/T 081.
8.4 Re-inspection
The re-inspection of steel plates and strips shall be carried out in accordance
with the provisions of GB/T 247.
9 Packaging, marking, quality certificate
The packaging, marking, quality certificate of steel plates and steel strips shall
comply with the provisions of GB/T 247.
Appendix A
(Informative)
Theoretical weighting method for hot rolled steel checker plate
A.1 For the steel checker plates which are delivered according to Figure 1 ~
Figure 4 of this standard, the theoretical weighting method is as shown in Table
A.1.
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of YB/T 4159-2007 be delivered?Answer: The full copy PDF of English version of YB/T 4159-2007 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of YB/T 4159-2007_English with my colleagues?Answer: Yes. The purchased PDF of YB/T 4159-2007_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- YB/T 4159-2007 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. How to buy and download a true PDF of English version of YB/T 4159-2007?A step-by-step guide to download PDF of YB/T 4159-2007_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "YB/T 4159-2007".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|