JJF 1396-2013 PDF English
US$160.00 · In stock · Download in 9 secondsJJF 1396-2013: Calibration specification for spectrum analyzer Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| JJF 1396-2013 | English | 160 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Calibration specification for spectrum analyzer
| Valid |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: JJF 1396-2013
JJF 1396-2013: Calibration specification for spectrum analyzer---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/JJF1396-2013
JJF
NATIONAL METEOROLOGY TECHNICAL SPECIFICATION
OF THE PEOPLE’S REPUBLIC OF CHINA
Calibration specification for spectrum analyzer
Issued on: FEBRUARY 16, 2013
Implemented on: AUGUST 16, 2013
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine of the People's Republic of China
Table of Contents
Introduction ... 6
1 Scope ... 7
2 Normative references ... 7
3 Overview ... 7
4 Metrological characteristics ... 7
4.1 Reference frequency ... 7
4.2 Calibration signal level ... 7
4.3 Frequency marker ... 8
4.4 Sweep width ... 8
4.5 Resolution bandwidth ... 8
4.6 Frequency stability ... 8
4.7 Vertical display scale ... 8
4.8 Reference level ... 9
4.9 Input attenuator conversion effects ... 9
4.10 Resolution bandwidth conversion effect ... 9
4.11 Display average noise level... 9
4.12 Residual response ... 9
4.13 Image response ... 9
4.14 Scan time ... 9
4.15 Absolute amplitude ... 9
4.16 Input frequency response ... 10
4.17 Second harmonic distortion ... 10
4.18 Third-order intermodulation distortion... 10
4.19 Gain compression ... 10
4.20 Input voltage standing wave ratio... 10
4.21 Power bandwidth ... 10
5 Calibration conditions ... 10
5.1 Environmental conditions ... 10
5.2 Equipment used for calibration ... 11
6 Calibration items and calibration methods ... 12
6.1 Appearance and operation normality inspection ... 13
6.2 Reference frequency ... 13
6.3 Calibration signal level ... 14
6.4 Frequency reading ... 16
6.5 Sweep width ... 16
6.6 Resolution bandwidth ... 17
6.7 Noise sideband ... 20
6.8 Residual frequency modulation ... 21
6.9 Vertical display scale ... 22
6.10 Reference level ... 24
6.11 Input attenuator conversion effect ... 24
6.12 Resolution bandwidth conversion effect ... 25
6.13 Display average noise level ... 26
6.14 Residual response ... 27
6.15 Image response ... 27
6.16 Scan time ... 28
6.17 Absolute amplitude ... 29
6.18 Input frequency response ... 30
6.19 Second harmonic distortion ... 31
6.20 Third-order intermodulation distortion... 32
6.21 Gain compression ... 33
6.22 Input voltage standing wave ratio... 34
6.23 Frequency counting ... 34
6.24 Power bandwidth ... 35
7 Presentation of calibration results ... 35
8 Recalibration Interval ... 36
Appendix A Calibration record form ... 37
Appendix B The inner page format of calibration certificate ... 47
Appendix C Examples of measurement uncertainty evaluation ... 59
Calibration specification for spectrum analyzer
1 Scope
This specification applies to the calibration of a spectrum analyzer in the
frequency range from 3 Hz ~ 50 GHz.
2 Normative references
This specification refers to the following documents.
JJF 1071-2010 The rules for drafting national calibration specification
For the dated documents, only the versions with the dates indicated are
applicable to this specification; for the undated documents, only the latest
version (including all the amendments) are applicable to this specification.
3 Overview
Spectrum analyzer is a super-heterodyne receiver with display device. It
consists of preselector, scanning local oscillator, mixer, middle amplifier, filter,
detector, amplifier and display. It is mainly used for spectrum analysis, AND can
also be used for the measurement of frequency, level, gain, attenuation, analog
modulation and digital modulation, and distortion jitter, which is and
indispensable instrument in communication, radio, television, radar, aerospace,
and other technology areas.
4 Metrological characteristics
4.1 Reference frequency
Frequency nominal value. 10 MHz;
Frequency accuracy. 1 × 10-5 ~ 1 × 10-10.
4.2 Calibration signal level
Level range. -30 dBm ~ 0 dBm;
4.16 Input frequency response
Frequency range. 3 Hz ~ 50 GHz;
Frequency response. ± 0.2 dB ~ ± 5 dB.
4.17 Second harmonic distortion
Frequency range. 10 MHz ~ 25 GHz.
4.18 Third-order intermodulation distortion
Frequency range. 10 MHz ~ 50 GHz.
4.19 Gain compression
Frequency range. 10 MHz ~ 50 GHz.
4.20 Input voltage standing wave ratio
Frequency range. 10 MHz ~ 50 GHz;
Input voltage standing wave ratio. 1.02 ~ 3.
4.21 Power bandwidth
3dB bandwidth range. 1 Hz ~ 10 MHz;
The maximum allowable error. ± 0.02 dB ~ ± 0.50 dB.
Note. The above lists the measurement range and technical parameter requirements of each
calibration parameter of the spectrum analyzer; during calibration, it shall follow the
technical parameter requirements as ...
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of JJF 1396-2013 be delivered?Answer: The full copy PDF of English version of JJF 1396-2013 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of JJF 1396-2013_English with my colleagues?Answer: Yes. The purchased PDF of JJF 1396-2013_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- JJF 1396-2013 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. How to buy and download a true PDF of English version of JJF 1396-2013?A step-by-step guide to download PDF of JJF 1396-2013_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "JJF 1396-2013".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|