GB/T 6684-2002 PDF English
US$100.00 · In stock · Download in 9 secondsGB/T 6684-2002: Chemical reagent -- Hydrogen peroxide 30% Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid GB/T 6684: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB/T 6684-2002 | English | 100 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Chemical reagent -- Hydrogen peroxide 30%
| Valid |
| GB/T 6684-1986 | English | 199 |
Add to Cart
|
2 days
|
Chemical reagents--Hydrogen peroxide
| Obsolete |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB/T 6684-2002
GB/T 6684-2002: Chemical reagent -- Hydrogen peroxide 30%---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT6684-2002
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 71.040.30
G 62
Chemical reagent -- Hydrogen peroxide 30%
ISSUED ON: MAY 29, 2002
IMPLEMENTED ON: DECEMBER 01, 2002
Issued by: General Administration of Quality Supervision, Inspection and
Quarantine of the People's Republic of China
Table of Contents
Foreword ... 3
1 Scope ... 5
2 Normative references ... 5
3 Characteristics ... 6
4 Specification (see Table 1) ... 6
5 Test ... 7
6 Inspection rules ... 11
7 Packaging and marks ... 11
_______________________________________________________________________
Molecular formula: H2O2
Relative molecular mass: 34.01 (based on 1997 international relative atomic
mass)
1 Scope
This Standard specifies technical requirements, test methods, inspection rules
and packaging as well as marks of chemical reagent - hydrogen peroxide 30%.
2 Normative references
The following standards contain provisions which, through reference in this
Standard, constitute provisions of this Standard. At the time of publication, the
editions indicated are valid. All standards are subject to revision. The parties
who are using this Standard shall explore the possibility of using the latest
version of the following standards.
GB/T 601-1988, Chemical reagent - Preparations of standard volumetric
solutions
GB/T 602-1988, Chemical reagent - Preparations of stock standard solutions
GB/T 603-1988, Chemical reagent - Preparations of reagent solutions for use
in test methods
GB/T 609-1988, Chemical reagent - General method for the determination of
total nitrogen (idt ISO 6353-1:1982)
GB/T 610.1-1988, Chemical reagent - General method for the determination
of arsenic
GB/T 619-1988, Chemical reagent - Regulations for sampling and
acceptance
GB/T 6682-1992, Water for laboratory use; Specifications (eqv ISO
NATIONAL STANDARD OF THE PEOPLE’S
REPUBLIC OF CHINA GB/T 6684-2002 neq ISO 6353-2:1983
Replacing GB/T 6684-1986
Chemical reagent - Hydrogen peroxide 30%
hydroxide standard titration solution [c(NaOH)=0.01mol/L] to titrate till the
solution is green and maintain 30s. The result shall be calculated according to
the provisions of Clause 7 “Water-soluble sample” in GB/T 9736-1988.
5.4 Chloride
Measure 18mL (20g) of sample [analytical reagent, chemical pure reagent take
9mL (10g)]. Dilute to 20mL. Determine according to GB/T 9729. The turbidity of
the solution must not be greater than the standard comparison solution.
The preparation of the standard comparison solution takes the following amount
of chloride standard solution:
Conduct the same processing with the sample at the same time.
5.5 Sulfate
Measure 9mL (10g) of sample [take 3.6mL (4g) of chemical pure reagent].
Dilute to 20mL. Add 0.5mL of hydrochloric acid solution (mass fraction is 20%)
to acidize. Determine according to GB/T 9728. The turbidity of the solution must
not be greater than the standard comparison solution.
The preparation of the standard comparison solution takes the following amount
of sulfate standard solution:
Conduct the same processing with the sample at the same time.
5.6 Total nitrogen
Measure 4.5mL (5g) of sample [analytical reagent, chemical pure reagent take
1.8mL(2g)]. Place in a platinum dish. After the sample is completely
decomposed, add 10mLof sulfuric acid solution (mass fraction is 5%).
Evaporate on water bath to 5mL. Move this solution to a branch tube distillation
flask. Dilute to 140mL and determine according to GB/T 609. The solution shall
not be yellower than the standard comparison solution.
The preparation of the standard comparison solution takes the following amount
of nitrogen standard solution:
Guaranteed reagent, analytical reagent
Chemical pure reagent
Chemical pure reagent
Guaranteed reagent
Analytical reagent
The solution must not be redder than the standard comparison solution.
The preparation of the standard comparison solution takes the following amount
of iron standard solution:
Conduct the same processing with the test solution that is completely
decomposed at the same time.
5.10 Nickel
Measure 90mL (100g) of sample. Slowly inject into a platinum dish. After the
sample is completely decomposed, evaporate dry on water bath. Add 0.5mL of
hydrochloric acid solution (mass fraction is 20%) to dissolve the residue. Dilute
to 25mL. Add 2mL of butadione oxime (nickel reagent) ethanol solution (10g/L),
2mL of sodium hydroxide solution (300g/L) and 1mL of potassium persulfate
solution (50g/L). Shake well. The solution must not be redder than the standard
comparison solution.
The preparation of standard comparison solution takes the standard solution
that contains 0.002mg of nickel (Ni). Add 0.5mL of hydrochloric acid solution
(mass fraction is 20%). Dilute to 25mL. Conduct the same processing with the
same volume of test solution.
5.11 Copper
Determine according to GB/T 9723.
5.11.1 Instrument conditions
Light source: Copper hollow cathode lamp;
Wavelength: 324.7nm;
Flame: Acetylene-air.
5.11.2 Determination method
Measure 225mL (250g) of sample for guaranteed reagent. Measure 45mL (50g)
of sample for analytical reagent. Measure 9mL (10g) of sample for chemical
pure reagent. Slowly inject into a platinum dish. After the sample is completely
decomposed, evaporate dry on water bath. Add 0.5mL of hydrochloric acid
solution (mass fraction is 10%) to dissolve the residue. Dilute to 10mL.
Guaranteed reagent
Analytical reagent
Chemical pure reagent
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB/T 6684-2002 be delivered?Answer: The full copy PDF of English version of GB/T 6684-2002 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB/T 6684-2002_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 6684-2002_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 6684-2002 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. Question 5: Should I purchase the latest version GB/T 6684-2002?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 6684-2002 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. How to buy and download a true PDF of English version of GB/T 6684-2002?A step-by-step guide to download PDF of GB/T 6684-2002_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 6684-2002".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|