GB/T 5334-2021 PDF English
US$185.00 · In stock · Download in 9 secondsGB/T 5334-2021: Passenger car - Wheels - Performance requirements and test methods for cornering and radial fatigue Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid GB/T 5334: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB/T 5334-2021 | English | 185 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Passenger car - Wheels - Performance requirements and test methods for cornering and radial fatigue
| Valid |
| GB/T 5334-2005 | English | 70 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Performance requirements and test methods of passenger car wheels
| Obsolete |
| GB/T 5334-1995 | English | 279 |
Add to Cart
|
3 days
|
Performance requirements and test methods of passenger car steel wheels
| Obsolete |
| GB 5334-1985 | English | 199 |
Add to Cart
|
2 days
|
Passenger car wheels test methods
| Obsolete |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB/T 5334-2021
GB/T 5334-2021: Passenger car - Wheels - Performance requirements and test methods for cornering and radial fatigue
---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT5334-2021
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 43.040.50
CCS T 22
GB/T 5334-2021
Replacing GB/T 5334-2005
Passenger Car - Wheels - Performance Requirements
and Test Methods for Cornering and Radial Fatigue
(ISO 3006.2015, Road Vehicles – Passenger
Car Wheels for Road Use – Test Methods, MOD)
Issued on. OCTOBER 11, 2021
Implemented on. MAY 01, 2022
Issued by. State Administration for Market Regulation;
Standardization Administration of PRC.
Table of Contents
Foreword... 3
1 Scope... 6
2 Normative References... 6
3 Terms and Definitions... 6
4 Test Wheels... 7
5 Performance Requirements... 7
5.1 Requirements of dynamic bending fatigue test performance... 7
5.2 Requirements of dynamic radial fatigue test performance... 7
6 Test Methods... 8
6.1 Dynamic bending fatigue test... 8
6.2 Dynamic radial fatigue test... 10
Appendix A (Informative) Structural Changes from this Document to ISO
3006.2015... 13
Bibliography... 14
Foreword
This Document was drafted as per the rules specified in GB/T 1.1-2020 Directives for
Standardization – Part 1.Rules for the Structure and Drafting of Standardizing
Documents.
This Document replaced GB/T 5334-2005 Performance Requirements and Test
Methods of Passenger Car Wheels. Compared with GB/T 5334-2005, the major
technical changes of this Standard are as follows besides the structural adjustments
and editorial modifications.
a) Change the scope of application, "This Document applies to passenger car
wheels specified in GB/T 3730.1" (see Clause 1 of this Edition; Clause 1 of 2005
Edition);
b) Add normative reference GB/T 3730.1 (see Clause 2 of this Edition);
c) Add terms and definitions (see Clause 3 of this Edition);
d) Add the requirements for test wheels (see Clause 4 of this Edition);
e) Change the performance requirement index; and add the number of test samples
and the performance requirement index of the spare wheel (see Clause 5 of this
Edition; Clause 3 of 2005 Edition);
f) Change the test method; delete the test items, test samples, preparation work,
etc.; and they are re-divided into four parts. test equipment, load determination,
test procedures and failure criteria; (see Clause 6 of this Edition; Clause 4 of
2005 Edition);
g) Change the requirements for the test equipment; and add the requirements for
the mounting surface of the test wheel connectors (see 6.1.1 and 6.2.1 of this
Edition; 4.3.1 and 4.4.1 of 2005 Edition);
h) Change part of the test procedure; and add the tightening torque requirements
for wheel installation (see 6.1.3 and 6.2.3 of this Edition; 4.3.2 and 4.4.2 of 2005
Edition);
i) Change the schematic diagram of the bending fatigue test (see Figure 1 of this
Edition; Figures 1 and 2 of 2005 Edition);
j) Add a schematic diagram of the radial fatigue test (see Figure 2 of this Edition).
This Document revised and adopted ISO 3006.2015 Road Vehicles - Passenger Car
Wheel for Road Use - Test Methods.
Compared with ISO 3006.2015, this Document has many adjustments in structure.
See Appendix A for a list of comparisons of structural number changes between the
two documents.
Compared with ISO 3006.2015, there are technical differences in this document. The
terms of these differences have been marked by a vertical single line (丨) on the outer
margin of the document. The technical differences and their reasons are as follows.
a) Regarding normative references, this document has made adjustments with
technical differences. The adjustments are collectively reflected in Clause 2
"Normative References". The specific adjustments are as follows.
--- Replace ISO 3911 with GB/T 2933 equivalent to the international standard
(see Clause 2 of this Edition),
--- Replace ISO 3833 with GB/T 3730.1 modified to adopt international standards
(see Clause 2 of this Edition);
b) Change terms and definitions; change the definition of "crack"; add the definition
of "wheel-tire assembly"; and delete other terms and definitions (see Clause 3 of
this Edition);
c) Change the informative Appendix A of ISO 3006.2015 into Clause 5 performance
indicators (see Clause 5 of this Edition);
d) Change the schematic diagram of the test equipment (see Figures 1 and 2 of this
Edition);
e) Add the technical requirements for the mounting surface of the test connector
(see 6.1.1 and 6.2.1 of this Edition);
f) Add the technical requirements for wheel load offset (see 6.1.4 of this Edition);
g) Change the tire pressure requirements for the radial fatigue test (see 6.2.2.2 of
this Edition).
This Document also made the following editorial modifications.
--- Change the standard name into Passenger Car – Wheels – Performance
Requirements and Test Methods for Cornering and Radial Fatigue.
Please note some contents of this Document may involve patents. The issuing agency
of this Document shall not assume the responsibility to identify these patents.
This Document was proposed by Ministry of Industry and Information Technology of
the RPC.
This Document shall be under the jurisdiction of National Technical Committee of Auto
Standardizations (SAC/TC 114).
Drafting organizations of this Document. Citic Dicastal Co., Ltd.; Dongfeng Automotive
Wheel Suizhou Co., Ltd.; Changchun FAWAY Automobile Components Co., Ltd.,
Wheel Branch; CATARC Automotive Testing Centre (Tianjin) Co, Ltd.; Baoding Lizhong
Wheel Manufacturing Co., Ltd.; Zhejiang Wanfeng Auto Wheel Co., Ltd.; Dare Wheel
Manufacturing Co., Ltd.; Zhejiang Jinfei Kaida Wheel Co., Ltd.; Zhejiang STARCO
Huanmei Auto-Parts Co., Ltd.; Shanghai Baosteel Wheels Co., Ltd.; Qingdao Product
Quality Testing Research Institute; SAIC Motor Co., Ltd.; Jiangsu Poran Holding Co.,
Ltd.; and Dongfeng Nissan Passenger Vehicle Company.
Chief drafting staffs of this Document. Xu Zuo, Li Shide, Wang Xianfu, Zhang Shijiang,
Wang Yang, Ma Jianhua, Liu Chunhai, Hua Yingchun, Mao Qiuxian, He Guoyuan, Zhu
Hongbin, Xiong Hongbing, Cai Jianzhong, Li Chao, Ding Jiaxiang, Wan Jinhua, and Li
Jiankun.
The historical editions replaced by this Document are as follows.
--- GB/T 5334-1985 was first-time published in 1985; first-time revised in 1995; and
second-time revised in 2005.
--- It is the third-time revision hereby.
Passenger Car - Wheels - Performance Requirements
and Test Methods for Cornering and Radial Fatigue
1 Scope
This Document specifies the test wheels, performance requirements and test methods
for the dynamic bending fatigue test and dynamic radial fatigue test of passenger car
wheels.
2 Normative References
The provisions in following documents become the provisions of this Document
through reference in this Document. For the dated documents, only the versions with
the dates indicated are applicable to this Document; for the undated documents, only
the latest version (including all the amendments) is applicable to this Document.
GB/T 2933 Wheels and Rims for Pneumatic Tyres - Vocabulary, Designation and
Marking (GB/T 2933-2009, ISO 3911.2004, IDT)
GB/T 3730.1 Motor Vehicles and Trailers – Types - Terms and Definitions (GB/T
3730.1-2001, ISO 3833.1999, MOD)
3 Terms and Definitions
For the purposes of this Document, the terms and definitions given in GB/T 2933 and
GB/T 3730.1 and the following apply.
An assembly that is made up of wheels, tires and valves.
The material separation which, during the test, is enlarged to 3mm and above.
4 Test Wheels
After all the processes, the new wheels that is representative and can be used for
vehicles.
5 Performance Requirements
See Table 2 for the requirements of dynamic radial fatigue test strengthening
coefficient and minimum number of cycles.
6 Test Methods
The test equipment shall have a driven drum and wheel mounts to rotate the wheel-
tire assembly under a fixed radial force, as shown in Figure 2.
The loading system shall maintain the specified load, and the deviation shall not
exceed ±2.5% of the calculated value of the test load.
The first choice for the test is the type of tires specified by the vehicle or wheel
manufacturer. If not specified, refer to GB/T 2978 to select the tire with the highest load
among the tires that can be used with the test wheel.
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB/T 5334-2021 be delivered?Answer: The full copy PDF of English version of GB/T 5334-2021 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB/T 5334-2021_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 5334-2021_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 5334-2021 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. Question 5: Should I purchase the latest version GB/T 5334-2021?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 5334-2021 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. How to buy and download a true PDF of English version of GB/T 5334-2021?A step-by-step guide to download PDF of GB/T 5334-2021_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 5334-2021".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|