GB/T 43258.4-2023 PDF English
US$305.00 · In stock · Download in 9 secondsGB/T 43258.4-2023: Road vehicles - Diagnostic communication over Internet Protocol (DoIP) - Part 4: Ethernet-based high-speed data link connector Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB/T 43258.4-2023 | English | 305 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Road vehicles - Diagnostic communication over Internet Protocol (DoIP) - Part 4: Ethernet-based high-speed data link connector
| Valid |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB/T 43258.4-2023
GB/T 43258.4-2023: Road vehicles - Diagnostic communication over Internet Protocol (DoIP) - Part 4: Ethernet-based high-speed data link connector
---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT43258.4-2023
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 43.040.10
CCS T 36
Road vehicles - Diagnostic communication over Internet
Protocol (DoIP) - Part 4: Ethernet-based high-speed data
link connector
(ISO 13400-4:2016, MOD)
ISSUED ON: NOVEMBER 27, 2023
IMPLEMENTED ON: NOVEMBER 27, 2023
Issued by: State Administration for Market Regulation;
Standardization Administration of the People’s Republic of China.
Table of Contents
Foreword ... 3
Introduction ... 5
1 Scope ... 8
2 Normative references ... 9
3 Terms, definitions and abbreviated terms ... 9
3.1 Terms and definitions ... 9
3.2 Abbreviated terms ... 10
4 Conventions ... 11
5 Connector requirements ... 11
Annex A (Normative) Ethernet pin assignment option 1... 12
Annex B (Normative) Ethernet pin assignment option 2 ... 15
Bibliography ... 18
Foreword
This document is drafted in accordance with the rules provided in GB/T 1.1-2020
Directives for standardization - Part 1: Rules for the structure and drafting of
standardizing documents.
This document is part 4 of GB/T 43258 Road vehicles - Diagnostic communication over
Internet Protocol (DoIP). The following parts have been issued for GB/T 43258:
— Part 2: Transport protocol and network layer services;
— Part 3: Wired vehicle interface based on IEEE 802.3;
— Part 4: Ethernet-based high-speed data link connector.
This document adopts ISO 13400-4:2016 Road vehicles - Diagnostic communication
over Internet Protocol (DoIP) - Part 4: Ethernet-based high-speed data link connector
by modification.
The technical differences between this document and ISO 13400-4:2016, and the causes
for these differences are as follows:
— REMOVE the reference and description of ISO 13400-1 which has been abolished.
Please note that some of the contents of this document may involve patents. The issuing
organization of this document is not responsible for identifying patents.
This document was proposed by the Ministry of Industry and Information Technology
of the People’s Republic of China.
This document shall be under the jurisdiction of National Technical Committee of Auto
Standardization (SAC/TC 114).
Drafting organizations of this document: Pan Asia Technical Automotive Center Co.,
Ltd., China Automotive Technology and Research Center Co., Ltd., Beijing Institute of
Technology, Dongfeng Motor Corporation Technical Center, Xiaomi Auto Technology
Co., Ltd., China Automotive Engineering Research Institute Co., Ltd, Chery
Automobile Co., Ltd., Chongqing Changan Automobile Co., Ltd., ZEEKR (Ningbo
Hangzhou Bay New Area) Co., Ltd., Great Wall Motor Company Limited, Huizhou
Desay SV Automotive Co., Ltd., Shanghai Motor Vehicle Inspection Certification &
Tech Innovation Center Co., Ltd., SAIC MAXUS Automotive Co., Ltd., China
Intelligent and Connected Vehicles (Beijing) Research Institute Co., Ltd., Neusoft
Group (Dalian) Ltd., CATARC Automotive Test Center (Tianjin) Co., Ltd., Beijing
National New Energy Vehicle Technology Innovation Center Co., Ltd., Nanjing
Forestry University, CATARC (Tianjin) Automotive Engineering Research Institute Co.,
Ltd., Spirent Communications Technology (Beijing) Limited, Shaanxi Automobile
Road vehicles - Diagnostic communication over Internet
Protocol (DoIP) - Part 4: Ethernet-based high-speed data
link connector
1 Scope
This document specifies a minimum set of diagnostic Ethernet connector requirements
which are based on ISO 15031-3.
The diagnostic connection specified in this document consists of two mating connectors:
the vehicle connector and the external test equipment connector as specified in ISO
15031-3.
This document specifies:
— the functional requirements for the vehicle connector. These functional
requirements are separated into two principal areas: connector contact allocation
and electrical requirements for connector and related electrical circuits;
— the functional requirements for the external test equipment connector. These
functional requirements are separated into two principal areas: connector contact
allocation and electrical requirements for connector and related electrical circuits.
Two different connector layouts and pin-outs are specified in this document:
— Ethernet pin assignment option 1;
— Ethernet pin assignment option 2.
Historically, option 1 is specified to meet Ethernet pin assignment of road vehicles
already launched onto the market and may be used to resolve conflicts with vehicle
manufacturer-specific usage of discretionary pins, e.g. pins 1 and 9.
Option 2 is specified to meet the Ethernet pin assignment of road vehicles to resolve
conflicts with vehicle manufacturer-specific usage of discretionary pins, e.g. pins 3 and
11.
A discovery/identification and activation method of the vehicle’s Ethernet via the
“Ethernet Activation Line” is specified in ISO 13400-3.
This document applies to the design and use based on 100BASE-TX diagnostic
Ethernet connector.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this
document and are indispensable for its application. For dated references, only the
edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
ISO 13400-2, Road vehicles - Diagnostic communication over Internet Protocol -
Part 2: Transport protocol and network layer services
Note: GB/T 43258.2-2023, Road vehicles - Diagnostic communication over
Internet Protocol - Part 2: Transport protocol and network layer services
(ISO 13400-2:2019, MOD)
ISO 13400-3, Road vehicles - Diagnostic communication over Internet Protocol
(DoIP) - Part 3: Wired vehicle interface based on IEEE 802.3
Note: GB/T 43258.3-2023, Road vehicles - Diagnostic communication over
Internet Protocol (DoIP) - Part 3: Wired vehicle interface based on IEEE
802.3 (ISO 13400-3:2016, MOD)
ISO 15031-3, Road vehicles - Communication between vehicle and external
equipment for emissions-related diagnostics - Part 3: Diagnostic connector and
related electrical circuits: specification and use
Note: GB/T 42193.3-2022, Road vehicles - Communication between vehicle and
external equipment for emissions-related diagnostics - Part 3: Diagnostic
connector and related electrical circuits: specification and use (ISO 15031-
3:2016, IDT)
SAE J1962-09/2015, Diagnostic Connector
3 Terms, definitions and abbreviated terms
3.1 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1.1
connection
two mated connectors (3.1.2) or contacts (3.1.3)
3.1.2
connector
XFRM: Ethernet transformer
xMII: Cross wire Media Independent Interface
100BASE-TX: Fast Ethernet
4 Conventions
ISO 13400 (all parts) is based on the conventions discussed in the OSI Service
Conventions (see ISO/IEC 10731) as they apply for diagnostic services.
5 Connector requirements
5.1 General
Vehicle manufacturers of road vehicles have the choice to implement one of two
different Ethernet connector layouts and pin assignments. This is needed to meet the in-
vehicle electrical architecture design.
Discovery/identification of the vehicle’s Ethernet option (configuration) is a
requirement for external test equipment in order to properly connect to the Ethernet
without causing any damage either to the vehicles or external test equipment bus
circuitry. In addition, any bus interference like bus errors shall be avoided.
The solution for external test equipment to identify the vehicle’s Ethernet option is
based on reading the vehicle’s identification signal provided on the “Ethernet activation
line” available on the diagnostic connector prior to enabling the multiplexer switches
to establish an electrical Ethernet connection to the vehicle’s Ethernet.
5.2 Normative references to ISO 15031-3
This document specifies additional requirements to support ISO 13400-2, and ISO
13400-3 to be implemented when accessed through the ISO 15031-3 diagnostic
connector.
5.3 Ethernet specific requirements
The Ethernet connector layout, pin assignment information, and simplified test
equipment circuitry example for Ethernet option 1 is specified in Annex A.
The Ethernet connector layout, pin assignment information, and simplified test
equipment circuitry example for Ethernet option 2 is specified in Annex B.
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB/T 43258.4-2023 be delivered?Answer: The full copy PDF of English version of GB/T 43258.4-2023 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB/T 43258.4-2023_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 43258.4-2023_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 43258.4-2023 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. How to buy and download a true PDF of English version of GB/T 43258.4-2023?A step-by-step guide to download PDF of GB/T 43258.4-2023_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 43258.4-2023".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|