GB/T 43017-2023 PDF English
US$230.00 · In stock · Download in 9 secondsGB/T 43017-2023: Green product assessment - Lighting products Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB/T 43017-2023 | English | 230 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Green product assessment - Lighting products
| Valid |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB/T 43017-2023
GB/T 43017-2023: Green product assessment - Lighting products---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT43017-2023
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 29.140.99
CCS K 71
Green product assessment - Lighting products
Issued on: SEPTEMBER 07, 2023
Implemented on: APRIL 01, 2024
Issued by. State Administration for Market Regulation;
Standardization Administration of the People's Republic of China.
Table of Contents
Foreword... 3
1 Scope... 4
2 Normative references... 4
3 Terms and definitions... 6
4 Assessment requirements... 6
4.1 Basic requirements... 6
4.2 Requirements for assessment indicators... 7
5 Assessment method... 11
Annex A (normative) Calculation method for annual carbon reduction... 12
Annex B (normative) Detection method for fluctuation depth... 14
Bibliography... 16
Green product assessment - Lighting products
1 Scope
This document specifies the assessment requirements and methods for green lighting
products.
This document applies to the green product assessment for light sources (including
reflective self-ballasted LED lamps, non-directional self-ballasted LED lamps) and
lamps (including LED panel lamps, LED downlights, LED lamps for road and tunnel
lighting, and LED floodlights).
2 Normative references
The following referenced documents are indispensable for the application of this
document. For dated references, only the edition cited applies. For undated references,
the latest edition of the referenced document (including any amendments) applies.
GB/T 191, Packaging and storage marks
GB/T 2423.17, Environmental testing for electric and electronic products - Part 2.
Test method - Test Ka. Salt mist
GB 7000.1, Luminaires -- Part 1.General requirements and tests
GB 7000.7, Safety requirements for floodlights
GB 7000.201, Luminaires -- Part 2-1.Particular requirements -- Fixed general-
purpose luminaires
GB 7000.202, Luminaires -- Part 2-2.Particular requirements -- Recessed
luminaires
GB 7000.203, Luminaires -- Part 2-3.Particular requirements -- Luminaires for
road and street lighting
GB 17625.1, Electromagnetic compatibility -- Limits -- Part 1.Limits for harmonic
current emissions (equipment input current ≤16 A per phase)
GB/T 17626.5, Electromagnetic compatibility -- Testing and measurement
techniques -- Surge immunity test
GB/T 17743, Limits and methods of measurement of radio disturbance
characteristics of electrical lighting and similar equipment
GB/T 18455, Packaging recycling marking
GB/T 18595, Equipment for general lighting purposes -- EMC immunity
requirements
GB/T 19001, Quality management systems -- Requirements
GB/T 20861, Terminology of waste product recovery
GB/T 23331, Energy management system requirements and guidelines
GB/T 23384, The recovery marking of products and components
GB/T 24001, Environmental management systems -- Requirements with guidance
for use
GB/T 24826, General lighting -- Light emitting diode (LED) products and related
equipment -- Terms and definitions
GB 24906, Self-ballasted LED-lamps for general lighting services >50V -- Safety
specifications
GB/T 24908, Self-ballasted LED lamps for general lighting services -- Performance
requirements
GB/T 26125, Electrical and electronic products -- Determination of six regulated
substances (lead, mercury, cadmium, hexavalent chromium, polybrominated
biphenyls, polybrominated diphenyl ethers)
GB/T 29294, Performance requirements for LED downlights
GB/T 29296, Self-ballasted LED reflector lamps -- Performance requirements
GB 30255, Minimum allowable values of energy efficiency and energy efficiency
grades of LED products for indoor lighting
GB/T 31268, Restricting excessive packaging for commodity -- General rule
GB/T 31897.201, Luminaire performance -- Part 2-1.Particular requirements for
LED luminaires
GB/T 33721, Reliability test methods for LED luminaries
GB/T 33761, General principles for green product assessment
GB 37478, Minimum allowable values of energy efficiency and energy efficiency
grades of LED luminaires for road and tunnel lighting
GB/T 37637, Performance requirements of LED floodlights
GB 38450, Minimum allowable values of energy efficiency and energy efficiency
grades of LED flat panel luminaires
GB/Z 39942, Application of GB/T 20145 for the assessment of blue light hazard to
light sources and luminaires
GB/T 41010, Degradability and identification requirements of biodegradable
plastics and products
GB/T 42064, Equipment for general lighting purposes -- Flicker characteristics --
Test method applying light flickermeter
GB/T 45001, Occupational health and safety management systems -- Requirements
with guidance for use
IEC TR 63158, Equipment for general lighting purposes - Objective test method for
stroboscopic effects of lighting equipment
3 Terms and definitions
For the purposes of this document, the terms and definitions defined in GB/T 20861,
GB/T 24826, GB/T 24908, GB/T 29294, GB/T 29296, GB/T 37637, GB 38450, GB/T
33761 apply.
4 Assessment requirements
4.1 Basic requirements
4.1.1 Manufacturing enterprises have had no major quality, safety and environmental
accidents in the past three years, and have no bad records in national and local energy-
saving and low-carbon inspections.
4.1.2 Manufacturing enterprises shall establish, implement, maintain and continuously
improve quality management systems, energy management systems, environmental
management systems and occupational health and safety management systems in
accordance with GB/T 19001, GB/T 23331, GB/T 24001 and GB/T 45001, respectively.
4.1.3 Advanced technology and processes shall be used for production. Technologies,
processes, equipment and related materials that are restricted, eliminated or banned by
relevant national and local government departments shall not be used.
4.1.4 The pollutant discharge of manufacturing enterprises shall meet the requirements
of national and local pollutant discharge standards. The total amount of pollutants shall
Annex A
(normative)
Calculation method for annual carbon reduction
A.1 Basic instructions
A.1.1 The annual carbon reduction amount in this document is calculated based on the
electrical energy consumption during the use of lighting products. It is based on the
annual service volume provided by the product.
A.1.2 The annual carbon reduction is assessed for a single lighting product.
A.1.3 The annual carbon reduction is assessed under standardized usage conditions that
reflect the typical annual usage duration under common domestic user behavior patterns.
The estimated annual carbon reduction is not specific to the actual annual carbon
reduction of a lighting product under the personalized use conditions of a specific user.
A.2 Calculation method for annual carbon reduction
The annual carbon reduction is calculated according to formula (A.1).
Where,
ER - The annual carbon reduction of the product to be evaluated, in kilograms of carbon
dioxide (kgCO2);
P - Product rated power, in kilowatts (kW);
T - The annual usage time of the product, according to Table A.1, in hours (h);
Efft - The initial light efficacy value of the product, in lumens per watt (lm/W);
Effb - Limited value of energy efficiency indicator for products of the same
specifications, taken according to Table A.2, in lumens per watt (lm/W);
EF - Power grid emission factor, in tons of carbon dioxide per megawatt hour
[tCO2/(MW·h)]; the data value is 0.5810.
NOTE. The value of the power grid emission factor data is 0.5810.The source is the "Notice on
Key Work Related to the Management of Enterprise Greenhouse Gas Emission Reports in 2022" by
the General Office of the Ministry of Ecology and Environment (Climate Letter [2022] No. 111 of
Annex B
(normative)
Detection method for fluctuation depth
B.1 Basic principle
Measure the light output waveform of the sample. Calculate the frequency and
fluctuation depth of the sample under test based on the light output waveform.
B.2 Measurement of light output waveform
B.2.1 Measuring instrument
The measuring instrument consists of a light sensor, amplifier, anti-aliasing filter, data
collector and data processing unit.
The light sensor and signal resolution of the measuring instrument shall meet the
requirements of GB/T 42064.
The output of the measuring instrument shall vary linearly with the received optical
signal and shall not have a zero offset.
The measuring instrument shall have an anti-aliasing filter with a cutoff frequency ≥3.5
kHz.
B.2.2 Measurement conditions
Install the sample and the optical sensor of the measuring instrument in an optical test
environment that complies with GB/T 42064.
B.2.3 Measurement steps
Cover the light sensor of the measuring instrument to zero the reading.
Make the sample under test work at the rated voltage or current and reach a stable state.
That is, the arithmetic mean value of the light output of the tested sample in an integral
multiple of the period is measured every 1 min. The difference between the maximum
reading and the minimum reading of the arithmetic mean of the light output over at least
15 min is less than 0.5 % of the minimum reading.
Use a measuring instrument to collect the light output waveform of the sample under
test. The sampling frequency shall be ≥10 kHz. The sampling time shall be ≥1 s.
B.3 Calculation of fluctuation depth
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB/T 43017-2023 be delivered?Answer: The full copy PDF of English version of GB/T 43017-2023 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB/T 43017-2023_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 43017-2023_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 43017-2023 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. How to buy and download a true PDF of English version of GB/T 43017-2023?A step-by-step guide to download PDF of GB/T 43017-2023_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 43017-2023".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|