GB/T 40178-2021 PDF English
US$110.00 · In stock · Download in 9 secondsGB/T 40178-2021: Ophthalmic optics - Formers Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB/T 40178-2021 | English | 110 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Ophthalmic optics - Formers
| Valid |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB/T 40178-2021
GB/T 40178-2021: Ophthalmic optics - Formers---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT40178-2021
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 11.040.70
CCS Y 89
Ophthalmic optics - Formers
眼科光学 模板
(ISO 11380:1994, Optics and optical instruments - Ophthalmic optics -
Formers, MOD)
ISSUED ON: MAY 21, 2021
IMPLEMENTED ON: DECEMBER 01, 2021
Issued by: State Administration for Market Regulation;
Standardization Administration of the People’s Republic of
China.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative references ... 4
3 Terms and definitions ... 4
4 Former types ... 4
5 Size requirements of former fixing hole ... 5
6 Marking ... 5
Ophthalmic optics - Formers
1 Scope
This document specifies the characteristics of the formers which are used by
the edge-cutting instrument when the lens is edge-cut.
This document applies to the formers which are used by the edge-cutting
instrument when the lens is edge-cut.
This document does not apply to separate formers which are required for
additional processing of lenses, such as grinding.
2 Normative references
The contents of the following documents constitute the indispensable clauses
of this document through normative references in the text. For dated references,
only the version corresponding to that date is applicable to this document; for
undated references, the latest version (including all amendments) is applicable
to this document.
GB/T 26397, Ophthalmic optics - Terminology (GB/T 26397-2011, ISO
13666:1998, MOD)
3 Terms and definitions
Terms and definitions determined by GB/T 26397 are applicable to this
document.
4 Former types
4.1 General principles
According to the lens size former (see 4.2) or lens ring size former (see 4.3),
distinguish the lens former.
Materials and thicknesses that are dimensionally stable shall be selected.
4.2 Lens size former
The lens size former is a former that has the same size and shape as the to-
be-made spectacle lens.
They can be configured into each size in a specific frame style [see Figure 1a)],
and can also be configured as a special size for the specified size range
(including larger and smaller sizes) [see Figure 1b)].
4.3 Lens ring size former
The lens ring size former is a former that has the same shape as the to-be-
made spectacle lens, but it is a standard chamfer smaller than the size of the
finished lens. They shall be able to be firmly installed in the lens ring by hand
without changing their size or shape; there shall be no visible gap between the
lens ring and the former.
5 Size requirements of former fixing hole
The size requirements shall use the sizes and tolerances that are given in
Figure 2.
For the fixing holes of two formers of the same nominal size and shape, the size
difference between any corresponding points on the circumference shall not
exceed 0.2 mm.
Note: Figure 1 shows the standard size of former fixing holes that are based on
global use.
The former that is shown in Figure 1a) is considered the most suitable
former for future development.
6 Marking
The former shall be marked with at least the following information:
a) Identification of the manufacturer or supplier;
b) Former identification;
c) The nose side of the former that is indicated by the letter "N", combined
with the enclosing-square method symbol.
The former type that meets the requirements in 4.2 shall also be indicated the
lens size of the horizontal enclosing-square method (unit: mm).
The former type that meets the requirements in 4.3 shall also be indicated the
lens size of the horizontal enclosing-square method that is intended to be made
(unit: mm), and shall also have the words of "lens ring size".
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB/T 40178-2021 be delivered?Answer: The full copy PDF of English version of GB/T 40178-2021 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB/T 40178-2021_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 40178-2021_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 40178-2021 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. How to buy and download a true PDF of English version of GB/T 40178-2021?A step-by-step guide to download PDF of GB/T 40178-2021_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 40178-2021".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|