GB/T 38575-2021 PDF English
US$155.00 · In stock · Download in 9 secondsGB/T 38575-2021: Spectacle frames - Screw threads Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB/T 38575-2021 | English | 155 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Spectacle frames - Screw threads
| Valid |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB/T 38575-2021
GB/T 38575-2021: Spectacle frames - Screw threads---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT38575-2021
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 11.040.70
CCS Y 89
Spectacle frames - Screw threads
眼镜架 螺纹
(ISO 11381:2016, Ophthalmic optics - Spectacle frames - Screw threads,
MOD)
ISSUED ON: APRIL 30, 2021
IMPLEMENTED ON: NOVEMBER 01, 2021
Issued by: State Administration for Market Regulation;
Standardization Administration of the People’s Republic of
China.
Table of Contents
Foreword ... 3
1 Scope ... 5
2 Normative references ... 5
3 Terms and definitions ... 5
4 Classification and requirements of screw threads ... 5
5 Screw length and tolerance ... 6
6 Thread tap ... 8
7 Measuring instrument ... 8
Appendix A (Informative) Screw thread application ... 9
Foreword
This document was drafted in accordance with the rules given in GB/T 1.1-2020,
Directives for standardization - Part 1: Rules for the structure and drafting of
standardizing documents.
This document uses the redrafting method to modify and adopt ISO 11381:2016
"Ophthalmic optics - Spectacle frames - Screw threads".
There are structural differences between this document and ISO 11381:2016:
Chapter 3 Terms and definitions is added in this document, which makes
subsequent serial numbers postponed.
The technical differences between this document and ISO 11381:2016 and the
reasons are as follows:
-- With regard to the normative references, this document makes technical
adjustments to adapt to the technical conditions of China. The
adjustments are concentrated in Chapter 2 “Normative references”. The
specific adjustments are as follows:
● Use GB/T 2516 which modifies and adopts international standards to
replace ISO 965-3;
● Use GB/T 3464.1 which modifies and adopts international standards
to replace ISO 529.
● Use GB/T 3934 which modifies and adopts international standards to
replace ISO 1502.
● Use GB/T 15054.2 to replace ISO 1501;
-- Add the scope of the Standard, "This document does not apply to self-
tapping screws", because self-tapping screws are used in the production
process of domestic spectacle frames, and restrictions need to be made;
-- Modify the internal thread grades of M1.0×0.25, M1.2×0.25 and M1.4×0.3
in Table 1; adjust from 5H to 6H. Adjust the enlargement tolerance grade
from 5H to 6H to match the domestic production level.
This document makes the following editorial changes:
-- Change the standard name to “Spectacle frames - Screw threads”, to be
consistent with our country's existing standard series;
-- Modify the informative appendix; add the application instructions for
M1.2×0.25 and M1.6×0.35 specifications in appendix A.
Spectacle frames - Screw threads
1 Scope
This document specifies the classification and requirements of screw threads
used for spectacle frames, the length and tolerances of screws, the thread taps
and measuring instruments.
This document applies to small threads, ordinary threads and thread taps.
This document does not apply to self-tapping screws.
2 Normative references
The contents of the following documents constitute the indispensable clauses
of this document through normative references in the text. For dated references,
only the version corresponding to that date is applicable to this document; for
undated references, the latest version (including all amendments) is applicable
to this document.
GB/T 2516, General purpose metric screw threads - Limit deviations (GB/T
2516-2003, ISO 965-3:1998, MOD)
GB/T 3464.1, Machine and hand taps - Part 1: Plain parallel shank machine
and hand taps (GB/T 3464.1-2007, ISO 529:1993, MOD)
GB/T 3934, Specification of gauges for general purpose screw threads (GB/T
3934-2003, ISO 1502:1996, MOD)
GB/T 15054.2, Miniature screw threads - Part 2: Tolerances and limits of size
3 Terms and definitions
No terms and definitions need to be defined in this document.
4 Classification and requirements of screw threads
Screw threads are divided into small threads and ordinary threads according to
their diameter and pitch.
The size of the small thread is S0.8×0.2; its tolerance shall meet the
requirements of GB/T 15054.2.
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB/T 38575-2021 be delivered?Answer: The full copy PDF of English version of GB/T 38575-2021 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB/T 38575-2021_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 38575-2021_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 38575-2021 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. How to buy and download a true PDF of English version of GB/T 38575-2021?A step-by-step guide to download PDF of GB/T 38575-2021_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 38575-2021".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|