HOME   Cart(12)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

GB/T 38494-2020 PDF English

US$105.00 · In stock · Download in 9 seconds
GB/T 38494-2020: Test method for impact resistance of ceramic wares
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Status: Valid
Standard IDContents [version]USDSTEP2[PDF] deliveryName of Chinese StandardStatus
GB/T 38494-2020English105 Add to Cart 0-9 seconds. Auto-delivery Test method for impact resistance of ceramic wares Valid

Excerpted PDFs (Download full copy in 9 seconds upon purchase)

PDF Preview: GB/T 38494-2020
      

Similar standards

GB/T 10811   GB/T 34251   GB 12651   GB/T 13522   

GB/T 38494-2020: Test method for impact resistance of ceramic wares

---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT38494-2020
GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 81.060.20 Y 24 Test Method for Impact Resistance of Ceramic Wares ISSUED ON: MARCH 06, 2020 IMPLEMENTED ON: OCTOBER 01, 2020 Issued by: State Administration for Market Regulation; Standardization Administration of PRC.

Table of Contents

Foreword ... 3 1 Scope ... 4 2 Terms and Definitions ... 4 3 Principle ... 4 4 Apparatus and Utensils ... 5 5 Specimen ... 5 6 Procedures ... 5 7 Calculation Formula ... 6 8 Presentation of Results ... 7 9 Test Report ... 7 Test Method for Impact Resistance of Ceramic Wares

1 Scope

This Standard specifies the test method for the impact resistance of ceramic wares. This Standard is applicable to the impact test of the centre and edge of the bottom of the ceramic wares.

2 Terms and Definitions

For the purpose of this document, the following terms and definitions apply. 2.1 Impact energy The energy that is required for generating cracks or breakage of ceramic wares. 2.2 Impact resistance The impact energy (edge impact strength) or the square ratio of impact energy to thickness (centric impact strength) that is required for generating cracks or breakage of ceramic wares. 2.3 Centric position The centre of the bottom of the ceramic wares. 2.4 Edge position The position, when the bottom of the ceramic ware is placed flat on a plane, that the edge of the mouth is in contact with the pendulum.

3 Principle

The method, when the pendulum is released from a certain height to the lowest point, and the potential energy is converted into kinetic energy to impact the ceramic wares to cause cracks or breakage, which is used to characterize the impact resistance of the ceramic wares. 6.1.3 Incremental test Place the pendulum at the lowest energy position; release the pendulum to impact the specimen; block the pendulum with hand or other objects to avoid secondary impact; observe whether the specimen is cracked or damaged. Gradually increase the impact energy until the sample is cracked or damaged. 6.1.4 Results recording Record the impact energy when cracks or breakage occur, and measure the thickness of the centric point of the specimen. 6.2 Edge impact test 6.2.1 Placement of the sample The sample is placed flat on the fixed table and fixed; the pendulum is placed at the lowest point. And the sample fixed table is adjusted so that the impact point of the pendulum is at the thinnest and most prominent position of the edge of the specimen. 6.2.2 Fixed value test Place the pendulum at a predetermined energy position; release the pendulum to impact the specimen; block the pendulum with hand or other objects to avoid secondary impact. Take out the specimen, and observe whether the specimen is cracked or damaged. 6.2.3 Incremental test Place the pendulum at the lowest energy position; release the pendulum to impact the specimen; block the pendulum with hand or other objects to avoid secondary impact; observe whether the sample is cracked or damaged. Gradually increase the impact energy until the sample is cracked or damaged. 6.2.4 Results recording Record the impact energy when cracks or breakage occur.

7 Calculation Formula

The calculation of impact resistance in the centric impact test is shown in Formula (1): Where: ......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.


      

Tips & Frequently Asked Questions

Question 1: How long will the true-PDF of English version of GB/T 38494-2020 be delivered?

Answer: The full copy PDF of English version of GB/T 38494-2020 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.

Question 2: Can I share the purchased PDF of GB/T 38494-2020_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 38494-2020_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. www.ChineseStandard.us -- GB/T 38494-2020 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.

How to buy and download a true PDF of English version of GB/T 38494-2020?

A step-by-step guide to download PDF of GB/T 38494-2020_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 38494-2020".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3    Steps 4~6    Step 7    Step 8    Step 9