GB/T 32828-2016 PDF English
US$230.00 · In stock · Download in 9 secondsGB/T 32828-2016: Warehouse and logistics automation system���s functional safety specificati Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB/T 32828-2016 | English | 230 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Warehouse and logistics automation system���s functional safety specificati
| Valid |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB/T 32828-2016
GB/T 32828-2016: Warehouse and logistics automation system���s functional safety specificati---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT32828-2016
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 25.040
N 19
Warehouse & logistics automation system’s functional safety
specification
Issued on. AUGUST 29, 2016
Implemented on. MARCH 1, 2017
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine of PRC;
Standardization Administration of PRC.
Table of Contents
Foreword... 3
Introduction... 4
1 Scope... 5
2 Terms and definitions... 5
3 Technical specifications of a WAS... 6
4 Functional safety evaluation... 8
5 Functional safety measures... 9
Appendix A (Informative) Example of warehouse & logistics automation system (WAS)
... 12
References... 15
Foreword
This standard is drafted in accordance with the provisions given in GB/T 1.1-2009.
This standard is proposed by China Machinery Industry Federation.
This standard shall be under the jurisdiction of China National Technical Committee
for Automation Systems and Integration Standardization (SAC/TC159).
Drafting organizations of this standard. Beijing Machinery Industry Automation
Research Institute, Beijing Materials Handling Research Institute.
The main drafters of this standard. Hu Jiang, Wang Yong, Liu Ying, Lu Daming.
1 Scope
This standard specifies the general requirements for the functional safety of warehouse
& logistics automation systems (hereinafter referred to as WAS, and see Appendix A
for it), provides the technical specifications of WAS, the evaluation method for WAS
functional safety, and the measures that shall be taken to achieve WAS functional safety.
The standard is used for processing activities related to WAS functional safety.
This standard applies to the safety requirements for WAS related to the overall operation
and function of the system, excluding the safety requirements of a single device. The
safety requirements for individual devices are given in the specific standards for these
devices. Therefore, this standard only involves the contents, which shall be considered
in the designs of the connection of equipment working together, electrical control of
automated logistics equipment, and computer monitoring and management system;
these contents are significant to the safety of users and operators of WAS.
2 Terms and definitions
The following terms and definitions apply to this document.
2.1 automation warehouse & logistics equipment
Warehouse & logistics equipment that can operate automatically, such as stackers,
conveyors, and distribution vehicles.
2.2 warehouse & logistics automation system; WAS
An integrated system that is managed and controlled by computers, with which units of
goods are carried and transported by automation warehouse & logistics equipment to
realize the receiving, dispatching, storage, and distribution of materials.
2.3 functional safety
A part of the overall system security that relies on the correct responses and operations
(functional correctness) of systems or devices to the input.
2.4 supplier
An entity that provides (designs, manufactures, or integrates) warehouse & logistics
automation systems and is responsible for security policies, including safeguards,
control interfaces, and interconnection of control systems.
2.5 operator
Personnel who use, install, debug, maintain and transform automation warehouse &
logistics equipment.
2.6 safeguarded space
A space defined by protective measures in which the hazards prevented by these
protective measures cannot occur.
3 Technical specifications of a WAS
3.1 Functionality
A description of the functionality of a WAS shall include (but not be limited to) the
following.
3.3 Interfaces between Automation Warehouse & Logistics Equipment and
manual operations
The following contents shall be considered in the design of interfaces between
Automation Warehouse & Logistics Equipment and manual operations in a WAS.
4 Functional safety evaluation
4.1 Strategies for functional safety assessment
The work of WAS functional safety assessment and implementation of functional safety
measures shall be carried out jointly by the designer (supplier) and the user.
4.2 Recognition of the states that affect functional safety
After the functions, processes, and interfaces of the WAS have been determined
according to Chapter 3, it is necessary to identify the states that affect whether each task
can meet the requirements of functional safety; these states are related to the following.
4.3 Assessment of functional safety
After identifying the states that affect functional safety, a risk assessment of whether
each state can meet the requirements of functional safety shall be carried out by
identifying risk factors, which are derived from the combination of the following factors.
5 Functional safety measures
5.1 Basic principles for implementing functional safety
Functional safety is achieved through the following steps.
5.2 Functional safety design
5.2.1 Functional safety design for the control layer of automation warehouse &
logistics equipment
For the control layer of automation warehouse & logistics equipment, the unsafe factors
are eliminated or reduced through the following functional safety designs (but not
limited to that).
5.2.2 Functional safety design for computer management and monitoring layer
For the computer management monitoring layer, the unsafe factors are eliminated or
reduced through the following functional safety designs (but not limited to that).
5.2.3 Functional safety design for information interaction
For information interaction, the unsafe factors are eliminated or reduced through the
following functional safety designs (but not limited to that).
5.3 Safety precautions
For the risk that cannot be sufficiently reduced through functional safety designs, the
unsafe factor can be further reduced through the following protective measures (but not
limited to that).
5.4 Safety information prompt
For residual risks, the following safety information prompts (but not limited to that)
shall be provided.
Appendix A
(Informative)
Example of warehouse & logistics automation system (WAS)
The structure of the warehouse & logistics automation system is shown in Figure A.1.
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB/T 32828-2016 be delivered?Answer: The full copy PDF of English version of GB/T 32828-2016 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB/T 32828-2016_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 32828-2016_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 32828-2016 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. How to buy and download a true PDF of English version of GB/T 32828-2016?A step-by-step guide to download PDF of GB/T 32828-2016_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 32828-2016".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|