|
US$239.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 32324-2015: Rolling bearings -- Methods for the measurement and assessment of departure from roundness and waviness
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 32324-2015 | English | 239 |
Add to Cart
|
3 days [Need to translate]
|
Rolling bearings -- Methods for the measurement and assessment of departure from roundness and waviness
| Valid |
GB/T 32324-2015
|
PDF similar to GB/T 32324-2015
Basic data | Standard ID | GB/T 32324-2015 (GB/T32324-2015) | | Description (Translated English) | Rolling bearings -- Methods for the measurement and assessment of departure from roundness and waviness | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J11 | | Classification of International Standard | 21.100.20 | | Word Count Estimation | 11,170 | | Date of Issue | 2015-12-31 | | Date of Implementation | 2016-04-01 | | Quoted Standard | GB/T 7234 | | Regulation (derived from) | State Standard Announcement 2015 No.43 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the method of measuring and evaluating roundness and waviness errors of rolling bearing parts at specified positions by means of a contact roundness measuring device in terms of radius variation. This standard is applicable to the measurement and evaluation of roundness and waviness errors of all kinds of rolling bearing parts with nominal outer diameter of 3 mm to 1 000 mm. | GB/T 32324-2015: Rolling bearings -- Methods for the measurement and assessment of departure from roundness and waviness
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Rolling bearings - Methods for the measurement and assessment of departure from roundness and waviness
ICS 21.100.20
J11
National Standards of People's Republic of China
Rolling bearing roundness and waviness
Error measurement and evaluation method
2015-12-31 released
2016-04-01 implementation
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
China National Standardization Management Committee released
Foreword
This standard is drafted in accordance with the rules given in GB/T 1.1-2009.
This standard is proposed by the China Machinery Industry Federation.
This standard by the National Rolling Bearing Standardization Technical Committee (SAC/TC98) centralized.
The drafting unit of this standard. Luoyang Shaft Research Technology Co., Ltd., Fujian Yongan Bearing Co., Ltd., Luoyang Bearing Research Institute
Co., Ltd., Hangzhou Bearing Experimental Research Center Co., Ltd., Ningbo Cixing Bearing Co., Ltd., JMM Bearing Group Co., Ltd., Zhejiang Times
Technology Co., Ltd.
The main drafters of this standard. Li Zai, Ren Lizhen, Liu Jinxiu, Chen Defu, Zhao Ming, Li Xinglin, Hao Daqing, Zhao Kun, Shu Yongqiang, Chen Jianxin.
Rolling bearing roundness and waviness
Error measurement and evaluation method
1 Scope
This standard specifies the use of contact roundness measuring instrument to determine the radius of the rolling bearing parts in the specified parts of the roundness and waviness
Error measurement and evaluation method.
This standard applies to the nominal diameter of 3mm ~ 1000mm various types of rolling bearing parts roundness and waviness error measurement and
assessment.
2 normative reference documents
The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article
Pieces. For undated references, the latest edition (including all modifications) applies to this document.
GB/T 7234 Geometrical Product Specifications (GPS) Roundness measurement terms, definitions and parameters
3 terms and definitions
The following definitions and definitions as defined in GB/T 7234 apply to this document.
3.1
Roundness error roundnessdeviation
The roundness error of the measured cross section is determined by the difference between the maximum radius and the minimum radius of the contour of the part under test.
3.2
Waviness error wavinessdeviation
Random or periodic deviation from the ideal circle of surface roughness, taking the range of wave width over a range of waves
For the waviness error.
4 measurement requirements
4.1 Instruments
4.1.1 Measuring instrument type
Measuring instrument for the contact roundness measuring instrument, for the sensor rotary or table rotary.
4.1.2 Measurement result output mode
There are two output methods of measurement, that is, graphic recording or parameter direct display. The same instrument can have one or two outputs
the way.
4.1.3 frequency response, filter characteristics
For the nominal diameter of 3mm ~ 350mm rolling bearing parts, the measured contour frequency response range of 2u/r ~ 500u/r (u/r that
|