GB/T 2968-2020 PDF English
US$85.00 · In stock · Download in 9 secondsGB/T 2968-2020: Samarium metal Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid GB/T 2968: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB/T 2968-2020 | English | 85 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Samarium metal
| Valid |
| GB/T 2968-2008 | English | 199 |
Add to Cart
|
2 days
|
Samarium metal
| Obsolete |
| GB/T 2968-1994 | English | 199 |
Add to Cart
|
2 days
|
Samarium metal
| Obsolete |
| GB 2968-1982 | English | 199 |
Add to Cart
|
2 days
|
Technical requirements of samarium metal
| Obsolete |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB/T 2968-2020
GB/T 2968-2020: Samarium metal---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT2968-2020
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 77.120.99
H 65
Replacing GB/T 2968-2008
Samarium metal
ISSUED ON: NOVEMBER 19, 2020
IMPLEMENTED ON: OCTOBER 01, 2021
Issued by: State Administration for Market Regulation;
Standardization Administration of the People’s Republic of
China.
Table of Contents
Foreword ... 3
1 Scope ... 5
2 Normative references ... 5
3 Technical requirements ... 5
4 Test method ... 6
5 Inspection rules ... 7
6 Marking, packaging, transportation, storage and quality certificate ... 8
Samarium metal
1 Scope
This Standard specifies the technical requirements, test methods, inspection
rules, marking, packaging, transportation, storage and quality certificate of
samarium metal.
This Standard applies to the samarium metal that is produced by the metal
thermal reduction method, which is mainly used as rare earth permanent
magnet materials and metal additives.
2 Normative references
The following documents are indispensable for the application of this document.
For dated references, only the dated version applies to this document. For
undated references, the latest edition (including all amendments) applies to this
document.
GB/T 8170, Rules of rounding off for numerical values & expression and
judgment of limiting values
GB/T 12690, Chemical analysis methods of non-rare earth impurities in rare
earth metals and the oxides
GB/T 14635, Rare earth metals and their compounds - Determination of total
rare earth content
GB/T 17803, Designation system for rare earth products
GB/T 18115.5, Chemical analysis methods of rare earth impurities in rare
earth metals and their oxides Samarium - Determination of lanthanum,
cerium, praseodymium, neodymium, europium, gadolinium, terbium,
dysprosium, holmium, erbium, thulium, ytterbium, lutetium and yttrium
3 Technical requirements
3.1 Product classification
The products are divided into five designations of Sm-4N, Sm-3N5, Sm-3N,
Sm-2N5, and Sm-2N according to their chemical composition. The method of
expressing product designations shall meet the requirements of GB/T 17803.
4.1.3 The content of the main rare earth element (Sm) is obtained by the
subtraction method, that is, the difference between the total content of elements
(100%) and the total content of impurity elements (the combined content of rare
earth impurities and non-rare earth impurities).
4.1.4 The analysis method of the total content of rare earths (RE) shall be
carried out in accordance with the provisions of GB/T 14635. When the
measured total content of rare earths is above 99%, the actual value of the total
content of rare earths is calculated by the subtraction method, that is, the
difference between the total content of elements (100%) and the content of non-
rare earth impurities.
4.1.5 The relative purity of the main rare earth elements (Sm/RE) is calculated,
which is the percentage of the content of the main rare earth elements to the
total content of rare earth elements.
4.2 Numerical rounding
Rounding off the value shall be carried out in accordance with the provisions of
GB/T 8170.
4.3 Appearance quality
Under natural scattered light, check visually.
5 Inspection rules
5.1 Inspection and acceptance
5.1.1 The supplier's quality inspection department shall inspect products, to
ensure that the product quality meets the requirements of this Standard, and fill
in the product quality certificate.
5.1.2 The buyer shall inspect the received product in accordance with the
provisions of this Standard. If the inspection result does not conform to the
provisions of this Standard, it shall be submitted to the supplier within 2 months
from the date of receipt of the product, and the supplier and the buyer shall
negotiate and resolve it. If arbitration is required, an organization that is
recognized by both parties can be entrusted to conduct a joint sampling on the
buyer's side.
5.2 Batch
Products shall be submitted for inspection in batches; each batch shall consist
of products of the same designation.
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB/T 2968-2020 be delivered?Answer: The full copy PDF of English version of GB/T 2968-2020 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB/T 2968-2020_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 2968-2020_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 2968-2020 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. Question 5: Should I purchase the latest version GB/T 2968-2020?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 2968-2020 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. How to buy and download a true PDF of English version of GB/T 2968-2020?A step-by-step guide to download PDF of GB/T 2968-2020_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 2968-2020".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|