GB/T 25123.1-2018 PDF English
US$700.00 · In stock · Download in 9 secondsGB/T 25123.1-2018: Electric traction -- Rotating electrical machines for rail and road vehicles -- Part 1: Machines others than electronic convertor-fed alternating current motors Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid GB/T 25123.1: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB/T 25123.1-2018 | English | 700 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Electric traction -- Rotating electrical machines for rail and road vehicles -- Part 1: Machines others than electronic convertor-fed alternating current motors
| Valid |
| GB/T 25123.1-2010 | English | RFQ |
ASK
|
3 days
|
Electric traction -- Rotating electrical machines for rail and road vehicles -- Part 1: Machines other than electronic convertor-fed alternating current motors
| Obsolete |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB/T 25123.1-2018
GB/T 25123.1-2018: Electric traction -- Rotating electrical machines for rail and road vehicles -- Part 1: Machines others than electronic convertor-fed alternating current motors
---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT25123.1-2018
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 29.280
S 35
Replacing GB/T 25123.1-2010
Electric traction - Rotating electrical machines for rail and
road vehicles - Part 1.Machines others than electronic
convertor-fed alternating current motors
(IEC 60349-1.2010, MOD)
Issued on. JUNE 07, 2018
Implemented on. JANUARY 01, 2019
Issued by. State Administration for Market Regulation;
Standardization Administration of the People's Republic of China.
Table of Contents
Foreword... 3
1 Scope... 6
2 Normative references... 7
3 Terms and definitions... 8
4 Environmental conditions... 15
5 Characteristics... 15
6 Marking... 18
7 Inspection rules... 18
8 Type inspections... 23
9 Exit-factory inspections... 37
Annex A (normative) Supply voltages of traction systems... 47
Annex B (informative) Noise measurement and limits... 48
Annex C (informative) Methods of determining losses and efficiency... 59
Annex D (normative) Measurement of temperature... 72
Annex E (informative) Agreement between user and manufacturer... 76
Bibliography... 78
Foreword
GB/T 25123 "Electric traction - Rotating electrical machines for rail and road vehicles"
consists of the following parts.
- Part 1.Machines others than electronic convertor-fed alternating current motors;
- Part 2.Electronic convertor-fed alternating current motors;
- Part 3.Determination of the total losses of convertor-fed alternating current motors
by summation of the component losses;
- Part 4.Permanent magnet synchronous electrical machines connected to an
electronic converter.
This Part is Part 1 of GB/T 25123.
This Part was drafted in accordance with the rules given in GB/T 1.1-2009.
This Part replaces GB/T 25123.1-2010 "Electric traction - Rotating electrical machines
for rail and road vehicles - Part 1.Machines other than electronic convertor-fed
alternating current motors". Compared with GB/T 25123.1-2010, the main technical
changes in this Part are as follows.
- Add "Further tests can be selected according to GB/T 25117.2.To avoid duplication,
some type inspections and research tests can be carried out on the combined test
bed." (see 1.1 of this Edition);
- Modify the regulations for altitude and ambient temperature. In Clause 4, altitude
and ambient temperature, etc., are changed from the original direct regulations to
according to GB/T 32347.1-2015 (see Clause 4 of this Edition, Chapter 4 of
Edition 2010);
- Modify the name of the insulation class and change it to the thermal classification
of the insulation system. Add number to each class to express, for example,
130(B), 155(F), 180(H) (see 8.1.4, 8.1.5 of this Edition, 8.1.4, 8.1.5 of Edition
2010);
- Modify the content of traction motor limits. Since in GB/T 10068-2008, the limit
value of vibration velocity has changed, so for the limit value of traction motor,
this Part is directly stipulated in 8.8.In this 8.8, the longitudinal vibration velocity
content of the motor without fixed bearing structure is not assessed (see 8.8 of
this Edition, 8.8 of Edition 2010);
- Modify the reference documents in the annex. GB/T 755.2 in Annex C is replaced
by GB/T 25442 (see C.1, C.6.1 of this Edition, B.1, B.6.1 of Edition 2010);
- Modify the optional methods and standards for noise measurement (see B.1 of this
Edition, C.1 of Edition 2010).
This Part uses redrafting method to modify and adopt IEC 60349-1.2010 "Electric
traction - Rotating electrical machines for rail and road vehicles - Part 1.Machines other
than electronic converter-fed alternating current motors".
Compared with IEC 60349-1.2010, this Part has certain adjustments in structure. The
specific adjustments are as follows.
- Modify the serial number of the article in Chapter 1 and add the title of the article;
- Delete B.7 and adjust its content to the Bibliography;
- Modify the serial numbers of the clauses in Annex E. Adjust E.1, E.2, E.3 to Table
E.1;
- Modify the appendix number. Annex A is adjusted to Annex D, Annex B to Annex
C, Annex C to Annex B, and Annex D to Annex A.
There are technical differences between this Part and IEC 60349-1.2010.Terms
covered by these differences are indicated by a single vertical line (|) in their outer
margins. The specific technical differences and their reasons are as follows.
- Regarding the normative references, this Part has adjusted with technical
differences to adapt to the technical conditions of China. The adjustments are
reflected in Chapter 2 "Normative references". The specific adjustments are as
follows.
• Use GB/T 755 that identically adopts IEC 60034-1 to replace IEC 60034-1 (see
Chapter 4);
• Use GB/T 1971 that identically adopts IEC 60034-8 to replace IEC 60034-8 (see
6.2);
• Use GB/T 11021 that identically adopts IEC 60085 to replace IEC 60085 (see
8.1.4);
• Use GB/T 28028 that modifies IEC 60638 to replace IEC 60638 (see 8.3.1);
• Use GB/T 32347.1-2015 that modifies IEC 62498-1.2010 to replace IEC 62498-
1.2010 (see Chapter 4);
• Add GB/T 1402, GB/T 2900.25, GB/T 2900.36, GB/T 2900.74, GB/T 2900.83,
GB/T 10068, GB/T 25117.2 as references. Delete the corresponding standard
in the Bibliography (see 1.1, Chapter 3, 8.8 and Annex A).
- Modify the definition for short-time overload rating. Correct the errors in IEC
60349-1.2010.The test method is changed from Annex A to the requirements of
8.1.5 (see 3.1.4);
- Modify the environmental conditions. Altitude and temperature are quoted from
GB/T 32347.1-2015, meeting the requirements of China's national conditions (see
Chapter 4);
- Add the footnote in Table 2, so as to conform to the actual situation in China (see
8.1.4).
This Part has made the following editorial changes.
- Add the table note "Other measurement methods and limit values shall be
determined through negotiation between the supplier and the purchaser." (see
Table 2);
- Modify the title of Chapter 7 (see Chapter 7);
- Modify the format of Table 1 (see 7.2);
- Add "NOTE. Annex E gives the content of negotiation between the supplier and
the purchaser" to lead to Annex E (see Chapter 9);
- Add the number of the formula (see Annex B, Annex C, Annex D);
- Modify the Bibliography (see Bibliography).
Attention is drawn to the possibility that some of the elements of this document may be
the subject of patent rights. The issuing authority shall not be held responsible for
identifying any or all such patent rights.
This Part was proposed by National Railway Administration.
This Part shall be under the jurisdiction of National Technical Committee on Traction
Electrical Equipment and Systems of Standardization Administration of China
(SAC/TC 278).
The drafting organizations of this Part. CRRC Zhuzhou Electric Locomotive Co., Ltd.,
CRRC Yongji Electric Locomotive Co., Ltd., CRRC Zhuzhou Electric Locomotive
Research Institute Co., Ltd., CRRC Zhuzhou Electric Locomotive Co., Ltd.
Main drafters of this Part. Zhu Lixiang, Meng Yuling, Li Yifeng, Zhao Jiangnong, Tang
Liu.
Version of standard substituted by this document is.
- GB/T 25123.1-2010.
Electric traction - Rotating electrical machines for rail and
road vehicles - Part 1.Machines others than electronic
convertor-fed alternating current motors
1 Scope
The electrical inputs or outputs of machines in this Part may have the following forms.
Machines obtaining power from a line or battery, and supplying power to traction
motors on the same vehicle or train.
2 Normative references
The following referenced documents are indispensable for the application of this
document. For dated references, only the edition cited applies. For undated references,
the latest edition of the referenced document (including any amendments) applies.
GB/T 755, Rotating electrical machines - Rating and performance (GB/T 755-2008,
IEC 60034-1.2004, IDT)
3 Terms and definitions
For the purposes of this document, the terms and definitions defined in GB/T 2900.25,
GB/T 2900.36, GB/T 2900.74 and GB/T 2900.83 as well as the followings apply.
an engine-driven main generator normally has two continuous ratings which are defined
below.
4 Environmental conditions
Unless otherwise specified by the user, the following environmental conditions are
assumed in this Part.
5 Characteristics
All characteristics, irrespective of the thermal class of insulation system used on the
machine to which they apply, shall be drawn for a winding reference temperature of
150°C which shall be stated on the characteristics.
If the machine drives an external load, such as a blower, the power absorbed by this
external load shall be shown or stated and the statement of overall efficiency shall be
replaced by one of the total input power to the machine at the continuous rating.
6 Marking
All the machines covered by this Part shall carry a nameplate visible when the machine
Terminal and lead markings shall be in accordance with GB/T 1971, unless otherwise
agreed.
7 Inspection rules
Exit-factory inspections are intended to demonstrate that each machine is sound both
electrically and mechanically, and that it is essentially identical with the machine which
has been type inspected.
8 Type inspections
The temperature rises of the windings, commutators or slip rings at the "commencement
of cooling" shall not exceed the values given in Table 2.
Tests to demonstrate compliance with the specified characteristics may be by any
suitable method (examples being given in Annex C), load tests being carried out with
the machine hot.
9 Exit-factory inspections
The machine shall be run on load, normally for 1 h starting cold, the test conditions
(voltage, current, excitation and ventilation) being chosen to give final winding
temperature rises reasonably close to those obtained at the end of the guaranteed rating
type inspection.
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB/T 25123.1-2018 be delivered?Answer: The full copy PDF of English version of GB/T 25123.1-2018 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB/T 25123.1-2018_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 25123.1-2018_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 25123.1-2018 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. Question 5: Should I purchase the latest version GB/T 25123.1-2018?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 25123.1-2018 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. How to buy and download a true PDF of English version of GB/T 25123.1-2018?A step-by-step guide to download PDF of GB/T 25123.1-2018_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 25123.1-2018".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|