GB/T 2039-2024 PDF English
US$785.00 · In stock · Download in 9 secondsGB/T 2039-2024: Metallic materials - Uniaxial creep testing method in tension Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid GB/T 2039: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB/T 2039-2024 | English | 785 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Metallic materials - Uniaxial creep testing method in tension
| Valid |
| GB/T 2039-2012 | English | 1519 |
Add to Cart
|
6 days
|
Metallic materials -- Uniaxial creep testing method in tension
| Obsolete |
| GB/T 2039-1997 | English | 399 |
Add to Cart
|
3 days
|
Metallic materials--Creep and stress-rupture test in tension
| Obsolete |
| GB 2039-1980 | English | 239 |
Add to Cart
|
2 days
|
Metals--Tension creep testing
| Obsolete |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB/T 2039-2024
GB/T 2039-2024: Metallic materials - Uniaxial creep testing method in tension---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT2039-2024
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 77.040.10
CCS H 22
Replacing GB/T 2039-2012
Metallic materials - Uniaxial creep testing method in tension
(ISO 204.2023, Metallic materials - Uniaxial creep testing in tension - Method of
test, MOD)
Issued on: MAY 28, 2024
Implemented on: DECEMBER 01, 2024
Issued by. State Administration for Market Regulation;
Standardization Administration of the People’s Republic of China.
Table of Contents
Foreword... 3
Introduction... 6
1 Scope... 7
2 Normative references... 7
3 Terms and definitions... 8
4 Symbols and their meanings... 16
5 Test principle... 18
6 Test apparatus... 18
7 Test sample... 24
8 Test procedure... 30
9 Processing of test results... 33
10 Test validity... 33
11 Test results... 33
12 Test report... 34
Appendix A (Informative) Information on thermocouple drift... 37
Appendix B (Informative) Thermocouple calibration methods... 41
Appendix C (Normative) Creep testing on V-notch and blunt-notch test samples... 42
Appendix D (Informative) Presentation of results and graphical extrapolation... 46
Appendix E (Informative) Methods for estimating uncertainty based on the Guide to
the Expression of Uncertainty in Measurement (GUM)... 57
References... 64
Foreword
This document was drafted in accordance with the rules given in GB/T 1.1-2020,
Directives for standardization - Part 1.Rules for the structure and drafting of
standardizing documents.
This document replaces GB/T 2039-2012 Metallic materials - Uniaxial creep testing
method in tension. Compared with GB/T 2039-2012, except for structural adjustment
and editorial changes, the main technical changes are as follows.
-- Change the scope. continuous creep test, interrupted creep test, creep-rupture
(endurance) test measuring only the rupture time, and test to verify passability
under a given stress (see Chapter 1; Chapter 1 of the 2012 edition);
-- Add and modify some terms, definitions and symbols (see Chapter 3; Chapter
3 of the 2012 edition);
-- Modify Figure 1 to “Schematic diagram of stress-extension curve” (see Figure
1; Figure 1 of the 2012 edition);
-- Modify some symbols and descriptions in Table 1 (see Chapter 4; Chapter 4
of the 2012 edition);
-- Modify the content of “Extension and elongation measurement device” (see
6.2; 6.2 of the 2012 edition);
-- Add requirements for the cold end temperature of thermocouples and indirect
temperature measurement methods (see 6.3.2.1);
-- Change the requirements on the use temperature and time of different types of
thermocouples in the original informative Appendix A to the main text (see
6.3.3; Appendix A of the 2012 edition);
-- Modify the determination of reference length Lr (see 7.5; 7.5 of the 2012
edition);
-- Add combined test (see 8.3.3);
-- Add the calculation formula for stress concentration factor Kt (see Appendix
C).
This document adopts ISO 204.2023 Metallic materials - Uniaxial tension creep testing
in tension - Method of test by modification.
This document has the following structural adjustments compared to ISO 204.2023.
-- Appendix D corresponds to Appendix E of ISO 204.2023;
-- Appendix E corresponds to Appendix D of ISO 204.2023.
The technical differences between this document and ISO 204.2023 and their reasons
are as follows.
-- Use the normative references GB/T 228.2, GB/T 12160 and GB/T 16825.2 to
replace ISO 6892-2, ISO 9513 and ISO 7500-2 respectively; add the
normative references to GB/T 4989, GB/T 8170, GB/T 10623, JJF 1637, JJG
141, JJG 276 and JJG 617, and delete the normative reference to ISO 6892-1
to adapt to our country's technical conditions;
-- In 6.1, add requirements for the coaxiality of the testing machine and
calibration cycle of the testing machine to ensure the accuracy of the test
results;
-- Since the stability of the strain measurement device is greatly affected by the
test cycle and environmental conditions, change the calibration cycle of the
extensometer in the strain measurement device in 6.2 from 3 years to 1 year;
-- Since the uniform temperature zone of the heating furnace directly affects the
creep test results, add the calibration of the uniform temperature zone of the
heating furnace in 6.3.5.
This document also makes the following editorial modifications.
-- Change the standard name to “Metallic materials - Uniaxial creep testing
method in tension”.
Please note that some of the contents of this document may involve patents. The issuing
organization of this document is not responsible for identifying patents.
This document was proposed by China Iron and Steel Industry Association.
This document shall be under the jurisdiction of National Technical Committee 183 on
Iron and Steel of Standardization Administration of China (SAC/TC 183).
Drafting organizations of this document. Central Iron & Steel Research Institute,
Sinotest Equipment Co., Ltd., Harbin Boiler Company Limited, Shenzhen Suns
Technology Stock Co., Ltd., Shenzhen Wance Testing Machine Co., Ltd., East China
University of Science and Technology, Zhejiang Special Equipment Science Research
Institute, Guobiao (Beijing) Testing & Certification Co., Ltd., China Metallurgical
Information and Standardization Institute, NCS Testing Technology Co., Ltd.
Main drafters of this document. Gao Yifei, Ma Shuangwei, Wei Limin, Zhang
Xiancheng, Liu Jie, Huang Xing, Du Bin, Li Pu, Dong Li, Lu Qi, Rao Liwen, Tan
Jianping, Fu Junping, Hou Huining, Cheng Yi.
The previous document versions replaced by this document are as follows.
Metallic materials - Uniaxial creep testing method in tension
1 Scope
This document specifies the following methods.
a) continuous creep test with continuous monitoring of elongation;
b) interrupted creep test with periodic measurement of percentage elongation;
c) creep rupture (endurance) test in which usually only the rupture time is
measured;
d) For verification test at a given stress and exceeding the predetermined time,
neither percentage extension nor percentage elongation is recorded.
Note. Creep testing can be carried out until the test sample breaks, or be stopped
before breaking.
This document applies to creep (endurance) testing on smooth and notched test samples.
2 Normative references
The following documents are referred to in the text in such a way that some or all of
their content constitutes requirements of this document. For dated references, only the
edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
GB/T 228.2, Metallic materials - Tensile testing - Part 2.Method of test at
elevated temperature (GB/T 228.2-2015, ISO 6892-2.2011, MOD)
GB/T 4989, Extension and compensating cables for thermocouples
GB/T 8170, Rules of rounding off for numerical values & expression and
judgment of limiting values
GB/T 10623, Metallic material - Mechanical testing - Vocabulary (GB/T 10623-
2008, ISO 23718.2007, MOD)
GB/T 12160, Metallic materials - Calibration of extensometers systems used in
uniaxial testing (GB/T 12160-2019, ISO 9513.2012, IDT)
GB/T 16825.2, Verification of static uniaxial testing machines - Part 2.Tension
creep testing machines - Verification of the applied force (GB/T 16825.2-2018,
ISO 7500-2.2006, IDT)
GB/T 16839.1, Thermocouples - Part 1.EMF specifications and tolerances (GB/T
16839.1-2018, IEC 60584-1.2013, IDT)
JJF 1637, Calibration Specification for Base Metal Thermocouples
JJG 141, Working Noble Metal Thermocouples
JJG 276, Verification Regulation of High-Temperature Creep and Stress-Rupture
Testing Machines
JJG 617, Verification Regulation of Digital Temperature Indicators and
Controllers
3 Terms and definitions
For the purposes of this document, the following terms and definitions, as well as those
given in GB/T 10623, apply.
3.1
reference length
Lr
The reference length used to calculate percentage extension or percentage elongation.
Note 1.This document specifies several different gauge lengths and reference lengths.
These lengths reflect actual usage habits in different laboratories. In some
cases, these lengths are marked directly on the test sample in the form of
engraved lines or bosses, while in other cases, the marked length for
determining the creep elongation may be a virtual length based on
calculations.
Note 2.See 7.5 for calculation method.
3.2
original gauge length
Lo
The length between the marks on the test sample measured at room temperature before
the test.
5 Test principle
Heat the test sample to the specified temperature; apply a constant tensile force or
constant tensile stress (see note) along the axis of the test sample and maintain it for a
certain time to obtain the following results.
-- specified creep extension (continuous test);
-- permanent elongation values obtained at appropriate intervals by testing
(discontinuous test);
-- creep rupture time (continuous or discontinuous test).
Note. “Constant stress” or “true stress” means that the ratio of the test force applied
to the test sample to the cross-sectional area of the test sample at any time
during the entire test remains constant. Usually, the results obtained from
constant stress and constant test force tests are different.
6 Test apparatus
6.1 Testing machine
The testing machine shall be able to apply axial test force and minimize the bending
moment and torque on the test sample. Before the test, the testing machine shall be
visually inspected to ensure that the force rods, fixtures, universal joints and connecting
devices of the testing machine are in good condition.
The test force shall be applied to the test sample evenly, smoothly and without vibration.
The testing machine shall be kept away from external vibration and impact. The testing
machine shall have a cushion means to minimize vibration when the test sample breaks.
The testing machine shall at least meet the requirements for Class 1 testing machine in
GB/T 16825.2.
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB/T 2039-2024 be delivered?Answer: The full copy PDF of English version of GB/T 2039-2024 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB/T 2039-2024_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 2039-2024_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 2039-2024 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. Question 5: Should I purchase the latest version GB/T 2039-2024?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 2039-2024 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. How to buy and download a true PDF of English version of GB/T 2039-2024?A step-by-step guide to download PDF of GB/T 2039-2024_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 2039-2024".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|