HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (11 Oct 2025)

GB/T 19408.6-2020 PDF English

US$125.00 · In stock · Download in 9 seconds
GB/T 19408.6-2020: Agricultural vehicles - Mechanical connections between towed and towing vehicles - Part 6: Specifications for nonswivel clevis couplings
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Status: Valid
Standard IDContents [version]USDSTEP2[PDF] deliveryName of Chinese StandardStatus
GB/T 19408.6-2020English125 Add to Cart 0-9 seconds. Auto-delivery Agricultural vehicles - Mechanical connections between towed and towing vehicles - Part 6: Specifications for nonswivel clevis couplings Valid

Excerpted PDFs (Download full copy in 9 seconds upon purchase)

PDF Preview: GB/T 19408.6-2020
      

Similar standards

GB/T 1592.3   GB/T 1592.2   GB/T 1592.1   GB/T 19408.4   

GB/T 19408.6-2020: Agricultural vehicles - Mechanical connections between towed and towing vehicles - Part 6: Specifications for nonswivel clevis couplings


---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT19408.6-2020
NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 65.060.10 T 67 Agricultural vehicles - Mechanical connections between towed and towing vehicles - Part 6: Specifications for non- swivel clevis couplings 连接 (ISO 6489-5:2019, Agricultural vehicles - Mechanical connections between towed and towing vehicles - Part 5: Specifications for non-swivel clevis couplings, MOD) ISSUED ON: NOVEMBER 19, 2020 IMPLEMENTED ON: JUNE 01, 2021 Issued by: State Administration for Market Regulation; Standardization Administration of the People’s Republic of China.

Table of Contents

Foreword ... 3 1 Scope ... 5 2 Normative references ... 5 3 Terms and definitions... 5 4 Dimensions ... 6 5 Calculation of D value ... 7 6 Technical requirements ... 8 7 Installation location ... 8 8 Permissible mechanical connections between non-swivel clevis couplings and swivel hitch rings ... 9 9 Marking ... 10 References ... 11 Agricultural vehicles - Mechanical connections between towed and towing vehicles - Part 6: Specifications for non- swivel clevis couplings

1 Scope

This Part of GB/T 19408 specifies the technical requirements for non-swivel clevis couplings, which are used to connect agricultural towing vehicles that are equipped with swivel hitch rings (as defined in GB/T 32538.3-2020). This Part applies to the agricultural towing vehicles that are equipped with swivel hitch rings (as defined in GB/T 32538.3-2020).

2 Normative references

The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB/T 1592.1, Agricultural tractors - Rear-mounted power take-off types 1, 2, 3 and 4 - Part 1: General specifications, safety requirements, dimensions for master shield and clearance zone (GB/T 1592.1-2016, ISO 500-1:2014, MOD) GB/T 1800.1, Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits (GB/T 1800.1-2020, ISO 286-1:2010, MOD) GB/T 1804-2000, General Tolerances - Tolerances for Linear and Angular Dimensions without Individual Tolerance Indications (eqv ISO 2768-1:1989) GB/T 32538.3-2020, Agricultural vehicles - Mechanical connections on towed vehicles - Part 3: Swivel hitch rings (ISO 5692-3:2011, IDT)

3 Terms and definitions

The following terms and definitions are applicable to this document. 3.1 non-swivel clevis coupling Hitching device, not rotating around the horizontal axis (pin) and longitudinal axis (pin), for the mechanical connection of towing and towed vehicles. 3.2 coupling reference centre The intersection of the pin centreline and the horizontally symmetrical centreline of the clevis coupling. 3.3 D value The value of the load acting on the towed vehicle along the longitudinal axis of the vehicle. Note: in kilonewtons (kN). 3.4 vertical load on the coupling point The vertical load, under static load conditions, on the coupling reference centre. Note: in kilograms (kg).

4 Dimensions

Values not specified in this Part shall be specified as appropriate. Tolerances on dimensions without individual tolerance indications shall be in accordance with GB/T 1804-2000, Table 1, tolerance class C. Limits and fits shall be in accordance with GB/T 1800.1. The dimensions of non-swivel clevis coupling shall be in accordance with Figure 1 and Table 1. D – the value of the load acting on the towed vehicle along the longitudinal axis of the vehicle, in kilonewtons (kN); g – the acceleration due to gravity, g = 9.81 m/s2; mr – the allowable mass of the towed vehicle, in tones (t); mt – the maximum allowable mass of the tractor or the curb mass of the towing vehicle, in tones (t).

6 Technical requirements

6.1 The shape of the non-swivel clevis coupling shall be such that the swivel hitch ring can meet the following minimum angles (see Figure 1): -- ±60° in the horizontal plane (yaw); -- ±20° in the vertical plane (pitch); -- ±20° around its longitudinal axis (roll). 6.2 Where a fixing device is used between the tractor or towing vehicle and the non- swivel clevis coupling, the fixing device shall be tested according to the maximum bearing load of the non-swivel clevis coupling. 6.3 When a tractor or towing vehicle uses a non-swivel clevis coupling, in order to avoid unintentional uncoupling, a safety device shall be provided, which shall be: -- easy to apply; -- retained on the hitch unit; -- tested by the application of a static load of 0.25D. 6.4 The non-swivel clevis coupling shall be designed according to the D values specified in Table 1.

7 Installation location

The non-swivel clevis coupling shall be installed on the longitudinal axis of the tractor or towing vehicle, as shown in Figure 2. The distance t, between the centre of the non- swivel clevis coupling and the end of the power take-off (PTO) shaft, is shown in Table 2. The installation of the non-swivel clevis coupling shall be as high as possible, without any part of the clevis/ring coupling or its construction entering the clearance zone specified for the PTO in GB/T 1592.1. ......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.


      

Tips & Frequently Asked Questions

Question 1: How long will the true-PDF of English version of GB/T 19408.6-2020 be delivered?

Answer: The full copy PDF of English version of GB/T 19408.6-2020 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.

Question 2: Can I share the purchased PDF of GB/T 19408.6-2020_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 19408.6-2020_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. www.ChineseStandard.us -- GB/T 19408.6-2020 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.

How to buy and download a true PDF of English version of GB/T 19408.6-2020?

A step-by-step guide to download PDF of GB/T 19408.6-2020_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 19408.6-2020".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3    Steps 4~6    Step 7    Step 8    Step 9