GB/T 17213.16-2015 PDF English
US$150.00 · In stock · Download in 9 secondsGB/T 17213.16-2015: Industrial-process control valves -- Part 8-4: Noise considerations -- Prediction of noise generated by hydrodynamic flow Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid GB/T 17213.16: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB/T 17213.16-2015 | English | 150 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Industrial-process control valves -- Part 8-4: Noise considerations -- Prediction of noise generated by hydrodynamic flow
| Valid |
| GB/T 17213.16-2005 | English | 519 |
Add to Cart
|
3 days
|
Industrial-process control valves -- Part 8-4: Noise considerations -- Prediction of noise generated by hydrodynamic flow
| Obsolete |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB/T 17213.16-2015
GB/T 17213.16-2015: Industrial-process control valves -- Part 8-4: Noise considerations -- Prediction of noise generated by hydrodynamic flow
---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT17213.16-2015
GB
ICS 23.060.40; 25.040.40
N 16
NATIONAL STANDARD OF THE
PEOPLE'S REPUBLIC OF CHINA
GB/T 17213.16-2015 / IEC 60534-8-4.2005
Replacing GB/T 17213.16-2005
Industrial-process control valves -
Part 8-4.Noise considerations - Prediction of noise
generated by hydrodynamic flow
工业过程控制阀
(IEC 60534-8-4.2005, IDT)
Issued on: DECEMBER 10, 2015
Implemented on: JULY 1, 2016
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine of the People's Republic of China;
Standardization Administration of the People's Republic of
China.
Table of Contents
Foreword... 3
1 Scope... 6
2 Normative references... 6
3 Symbols... 7
4 Preliminary calculations... 10
5 Noise predictions... 12
6 Multistage trim... 17
Annex A (Informative) Examples... 24
Bibliography... 29
Foreword
GB/T 17213 consists of the following parts, under the general title Industrial-process
control valves.
- Part 1.Control valve terminology and general considerations (GB/T 17213.1);
- Part 2-1.Flow capacity - Sizing equations for fluid flow under installed conditions
(GB/T 17213.2);
- Part 2-3.Flow capacity - Test procedures (GB/T 17213.9);
- Part 2-4.Flow capacity - Section Four. Inherent flow characteristics and
rangeability (GB/T 17213.10);
- Part 2-5.Flow capacity - Sizing equations for fluid flow through multistage control
valves with interstage recovery (GB/T 17213.17);
- Part 3-1.Dimensions - Face-to-face dimensions for flanged, two-way, globe-type,
straight pattern and centre-to-face dimensions for flanged, two-way, globe-type,
angle pattern control valves (GB/T 17213.3);
- Part 3-2.Dimensions - Face-to-face dimensions for rotary control valves except
butterfly valves (GB/T 17213.11);
- Part 3-3.Dimensions - End-to-end dimensions for buttweld, two-way, globe-type,
straight pattern control valves (GB/T 17213.12);
- Part 4.Inspection and routine testing (GB/T 17213.4);
- Part 5.Marking (GB/T 17213.5);
- Part 6-1.Mounting details for attachment of positioners to control valves - Section
1.Positioner mounting on linear actuators (GB/T 17213.6);
- Part 6-2.Mounting details for attachment of positioners to control valves -
Positioner mounting on rotary actuators (GB/T 17213.13);
- Part 7.Control valve data sheet (GB/T 17213.7);
- Part 8-1.Noise considerations - Laboratory measurement of noise generated by
aerodynamic flow through control valves (GB/T 17213.8);
- Part 8-2.Noise considerations - Laboratory measurement of noise generated by
hydrodynamic flow through control valves (GB/T 17213.14);
- Part 8-3.Noise considerations - Control valve aerodynamic noise prediction
terminology and general considerations (IEC 60534-1.2005, IDT)
- GB/T 17213.14-2005 Industrial-process control valves - Part 8-2.Noise
considerations - Laboratory measurement of noise generated by hydrodynamic
flow through control valves (IEC 60534-8-2.1991, IDT)
- GB/T 17213.15-2005 Industrial-process control valves - Part 8-3.Noise
considerations - Control valve aerodynamic noise prediction method (IEC
60534-8-3.2000, IDT)
This Part was proposed by China Machinery Industry Federation.
This Part shall be under the jurisdiction of National Technical Committee on Industrial
Process Measurement, Control and Automation (SAC/TC 124).
Responsible drafting organization of this Part. Shanghai Institute of Process
Automation Instrumentation.
Participating drafting organizations of this Part (in alphabetical order). Emerson
Process Management (Tianjin) Valve Co., Ltd., Chongqing Chuanyi Control Valve Co.,
Ltd., Chongqing Shizhuang Instrumentation Co., Ltd., Nanyang Nanfa Valve Co., Ltd.,
Hangzhou Lianggong Valve Co., Ltd., Shanghai Floauto Control Valve Co., Ltd., No. 7
Factory of Shanghai Automation Instrument Co., Ltd., Tianjin Jingtong Control
Instrumentation Technology Co., Ltd., Wuxi Smart Automation Engineering Co., Ltd.,
Wuzhong Instrument Co., Ltd., Zhejiang Aoxiang Auto-control Technology Co., Ltd.,
Zhejiang Pari World Automation Meter Co., Ltd., Zhejiang Sanfang Control Valve Co.,
Ltd., Zhejiang Yongsheng Meter Co., Ltd., Zhejiang Zhongde Automatic Control Valve
Co,. Ltd.
Main drafters of this Part. Wang Jiong, Li Minghua, Liao Jianmin, Li Zhanqi, Shen
Jianbiao, Shen Wei, Zhang Shishu, Zhang Dexian, Fan Ping, Cai Jiachao, Yang
Jianwen, Lin Feng, Wang Hanke, Zhang Yongliang, Ma Yushan, Zuo Bing, Gao Qiang,
He Wenguang, Ba Rongming, Xu Chunliang, Chen Yan, Meng Shaoxin, Chen Dajun,
Cai Kejian, Jiang Tangjin, Li Jun and Cai Dongwu.
This Part was first issued on September 2005, this is the first revision.
Industrial-process control valves - Part 8-4.Noise
considerations - Prediction of noise generated by
hydrodynamic flow
1 Scope
This Part of GB/T 17213 establishes a method to predict the noise generated in a
control valve by liquid flow and the resulting noise level measured downstream of the
valve and outside of the pipe. The noise may be generated both by normal turbulence
and by liquid cavitation in the valve. Parts of the method are based on fundamental
principles of acoustics, fluid mechanics, and mechanics. The method is validated by
test data. Noise generated by flashing flow is not considered in this standard.
The transmission loss (TL) equations are based on analysis of the interaction between
the sound waves inside the pipe and the coincidence frequencies in the wall of the
pipe taking into account that commercial pipe tolerances allow a relatively wide
variation in the thickness of the pipe wall. Ideal straight piping is assumed.
This Part is applicable to all conventional control valve styles including globe, butterfly,
cage-type, eccentric rotary, and modified ball valves. Tests so far have only been
conducted with water. The applicability of this method for fluids other than water is not
known at this time.
This Part considers only noise generated by hydraulic turbulence and fluid cavitation.
It does not consider any noise that might be generated by mechanical vibrations,
unstable flow patterns, and unpredictable behaviour. In the typical installation, very
little noise travels through the wall of the control valve body. The noise is measured at
the standard measuring point of 1 m downstream of the valve and 1 m away from the
outer surface of the pipe.
This prediction method has been validated with test results based on water covering
more than 90 % of all known valve types at inlet pressures of up to 15 bar. This method
is considered accurate within ± 5 dB (A) except in the range of xF = xFZ ± 0.1 [when xFZ
is calculated using equations (3a) or (3b)].
2 Normative references
The following referenced documents are indispensable for the application of this
document. For dated references, only the edition cited applies. For undated references,
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB/T 17213.16-2015 be delivered?Answer: The full copy PDF of English version of GB/T 17213.16-2015 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB/T 17213.16-2015_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 17213.16-2015_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 17213.16-2015 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. Question 5: Should I purchase the latest version GB/T 17213.16-2015?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 17213.16-2015 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. How to buy and download a true PDF of English version of GB/T 17213.16-2015?A step-by-step guide to download PDF of GB/T 17213.16-2015_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 17213.16-2015".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|