GB/T 17200-2008 PDF English
US$85.00 · In stock · Download in 9 secondsGB/T 17200-2008: Technical specification for tensile, compression and flexural testing machines for rubber and plastics (constant rate of traverse) Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid GB/T 17200: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB/T 17200-2008 | English | 85 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Technical specification for tensile, compression and flexural testing machines for rubber and plastics (constant rate of traverse)
| Valid |
| GB/T 17200-1997 | English | 439 |
Add to Cart
|
3 days
|
Requirements for tensile, flexural and compression testing machines for rubbers and plastics
| Obsolete |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB/T 17200-2008
GB/T 17200-2008: Technical specification for tensile, compression and flexural testing machines for rubber and plastics (constant rate of traverse)
---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT17200-2008
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 19.060; 83.200
N 72
GB/T 17200-2008 / ISO 5893.2002
Replacing GB/T 17200-1997
Technical specification for tensile, compression and
flexural testing machines for rubber and plastic
(constant rate of traverse)
(ISO 5893.2002, Rubber and plastics test equipment - Tensile, flexural and
compression types (constant rate of traverse) - Specification, IDT)
Issued on: JUNE 20, 2008
Implemented on: JANUARY 1, 2009
Issued by.
General Administration of Quality Supervision, Inspection
and Quarantine of the People’s Republic of China;
Standardization Administration of the People’s Republic of
China.
Table of Contents
Foreword... 3
1 Scope... 5
2 Normative references... 5
3 Terms and definitions... 5
4 Designation of machine class... 6
5 Design features... 7
6 Types of force-measuring system... 8
7 Steady-state machine accuracy... 8
8 Dynamic machine accuracy... 8
9 Measurement of elongation (deflection)... 9
10 Rate of displacement of driven grip... 10
11 Machine stiffness... 11
12 Stability... 11
13 Certificate of verification... 12
Foreword
Please note that some of the content of this Standard may involve patents. The issuing
agency of this Standard does not undertake the responsibility to identify these patents.
This Standard equivalently adopts the International Standard ISO 5893.2002 “Rubber and
plastics test equipment - Tensile, flexural and compression types (constant rate of traverse)
– Specification” (English third edition).
This Standard is equivalent to translation of ISO 5893.2002.The standard structure and
technical content are the same completely. For ease of use, this Standard makes the
following editorial changes to ISO 5893.2002.
- According to Chinese habit, modify the standard name;
- Delete the foreword of ISO 5893.2002; re-write the foreword of this Standard;
- The "international standard" is changed to be "this Standard";
- Use the decimal symbol “.” To replace the comma "," that acts as decimal symbol in
English;
- The international standards referenced in Chapter 2 have been transformed into
national standards; this Standard directly quotes the corresponding national standards.
This Standard replaces GB/T 17200-1997 “Requirements for tensile, flexural and
compression testing machines for rubbers and plastics”.
Compared with GB/T 17200-1997, the main changes of this Standard are as follows.
- Modify the standard name;
- Add Chapter 2 "Normative references" (see Chapter 2 of this edition);
- Delete two terms (Chapter 2 of 1997 edition; Chapter 3 of this edition);
- For testing machine, add 0.5 and 3 two levels; delete the superscript "1" of elongation
or deformation classification symbol (Chapter 3 of 1997 Edition; Chapter 4 of this
edition);
- Modify the relevant provisions of the steady-state machine accuracy (Chapter 7 of
1997 edition; Chapter 8 of this edition).
This Standard was proposed by China Machinery Industry Federation.
This Standard shall be under the jurisdiction of National Test-machine Standardization
Technical Committee (SAC/TC 122).
Responsible drafting organization of this Standard. Changchun Test-machine Institute.
Participating drafting organizations of this Standard. Shanghai Hualong Test Instrument
Co., Ltd., Jinan Shidai Shijin Instrument Co., Ltd. AND Chengde Jinjian Test Instrument
Co., Ltd.
The drafters of this Standard. Wang Xuezhi, Li Mingyi, Yuan Song, Liu Juan, Li Minghua
and Huang Dongkai.
The previous edition replaced by this Standard is as follows.
- GB/T 17200-1997.
Technical specification for tensile, compression
and flexural testing machines for rubber and
plastic (constant rate of traverse)
1 Scope
This Standard specifies requirements for tensile-testing systems operating at constant rate
of traverse and suitable for testing rubbers, plastics and adhesives. It also covers such
systems when used for flexural, shear and compression tests.
Any one system may only be applicable to a narrower range of materials.
2 Normative references
The following normative document contains provisions which, through reference in this text,
constitute provisions of this Standard For dated references, subsequent amendments to,
or revisions of, any of these publications do not apply. However, parties to agreements
based on this Standard are encouraged to investigate the possibility of applying the most
recent edition of the normative document indicated below. For undated references, the
latest edition of the normative document referred to applies. Members of ISO and IEC
maintain registers of currently valid International Standards.
GB/T 16825.1-2008 Static uniaxial testing machines - Part 1.Rally and (or) pressure
force measuring system of the testing machine inspection and calibration (ISO 7500-
1.2004, Metallic materials - Verification of static uniaxial testing machines Part 1.
Tension / compression testing machines - Verification and calibration of the force-
measuring system, IDT)
3 Terms and definitions
For the purposes of this Standard, the following terms and definitions apply.
3.1
tensile-testing system
machine composed of a nominally fixed member and a movable member, to which may be
attached suitable grips or jigs for holding a test piece
element, sensitivity to mains supply voltage fluctuation and change in electronic
component value.
The manufacturer shall therefore state in his specification, and in any instruction manual,
such of the following requirements as may be necessary to maintain the stated accuracy
of the machine.
a) the temperature range over which the machine accuracy is guaranteed;
b) the variation of supply voltage over which the machine accuracy is guaranteed;
c) the frequency at which is it necessary to adjust any manual control, e.g. for zero or
span.
13 Certificate of verification
When a test machine has been verified in accordance with this Standard, the verifying
authority shall issue a certificate stating the following.
a) the identity of the machine and the date of verification;
b) the range certified and the class of each force or extension scale;
c) the method of verification used and the identity of any calibration devices employed;
d) the ambient temperature at the time of verification;
e) the accuracy of the rate setting;
f) the number of this Standard, i.e. GB/T 17200-2008 / ISO 5893.2002.
The test machine shall be re-verified periodically to ensure that it continues to meet the
class(es) designated from this Standard. The frequency of re-verification depends on the
type of machine, the standard of maintenance, and the amount of usage. Normally, it is
recommended that re-verification be carried out at intervals not exceeding 12 months.
However, a machine shall be re-verified if it is moved to a new location or if it is subjected
to major repairs or adjustments.
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB/T 17200-2008 be delivered?Answer: The full copy PDF of English version of GB/T 17200-2008 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB/T 17200-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 17200-2008_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 17200-2008 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. Question 5: Should I purchase the latest version GB/T 17200-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 17200-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. How to buy and download a true PDF of English version of GB/T 17200-2008?A step-by-step guide to download PDF of GB/T 17200-2008_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 17200-2008".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|