GB/T 15934-2024 PDF English
US$380.00 · In stock · Download in 9 secondsGB/T 15934-2024: Electrical accessories - Cord sets and interconnection cord sets Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid GB/T 15934: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB/T 15934-2024 | English | 380 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Electrical accessories - Cord sets and interconnection cord sets
| Valid |
| GB 15934-2008 | English | 85 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
[GB/T 15934-2008] Electrical accessories -- Cord sets and interconnection cord sets
| Valid |
| GB 15934-1996 | English | 239 |
Add to Cart
|
3 days
|
Cord sets
| Obsolete |
| GB/T 15934.1-1995 | English | RFQ |
ASK
|
3 days
|
Terminology for nondestructive testing--Leak testing
| Obsolete |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB/T 15934-2024
GB/T 15934-2024: Electrical accessories - Cord sets and interconnection cord sets---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT15934-2024
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 29.120.10
CCS K 30
Replacing GB/T 15934-2008, GB/T 26219-2010
Electrical Accessories – Cord Sets and Interconnection Cord
Sets
(IEC 60799.2018, MOD)
Issued on. SEPTEMBER 29, 2024
Implemented on. OCTOBER 1, 2025
Issued by. State Administration for Market Regulation;
Standardization Administration of the People’s Republic of China.
Table of Contents
Foreword... 3
1 Scope... 7
2 Normative References... 7
3 Terms and Definitions... 8
4 General Requirements... 10
5 Requirements... 10
6 Electrical Continuity and Polarity... 13
7 EMC Requirements... 13
Appendix A (Normative) Routine Safety Testing of Factory-Wired Cord Sets
and Interconnection Cord Sets (Protection against Electric Shock and Correct
Polarity)... 15
Appendix B (Normative) Requirements for Y-Splitter Interconnection Part... 18
Bibliography... 29
Foreword
This Document was drafted as per the rules specified in GB/T 1.1-2020 Directives for
Standardization – Part 1.Rules for the Structure and Drafting of Standardizing Documents.
This Document replaced GB/T 15934-2008 Electrical Accessories - Cord Sets and
Interconnection Cord Sets, and GB/T 26219-2010 Electrical Accessories—Y-Splitter Cord Sets
and Y-Splitter Interconnection Cord Sets. This Document mainly adopts GB/T 15934-2008,
integrating the contents of GB/T 26219-2010.Compared with GB/T 15934-2008, the major
technical changes of this Document are as follows besides the structural adjustments and
editorial modifications.
--- Change the definition of cord sets; added the types of cord sets with two connectors (see
3.1 of this Edition; 3.1 of the 2008 Edition);
--- Change the definition of interconnection cord sets; add the types of interconnection cord
sets with two connectors (see 3.2 of this Edition; 3.2 of the 2008 Edition);
--- Add the terms and definitions of cord sets for use at higher ambient temperatures, Y-
splitter cord sets, interconnection cord sets for use at higher ambient temperatures, Y-
splitter interconnection cord sets, non-rewirable accessories, and Y-splitter
interconnection part (see 3.1.1, 3.1.2, 3.2.1, 3.2.2, 3.3, 3.6 of this Edition);
--- Change the requirements for components (see 5.1 of this Edition; 5.1 of the 2008 Edition);
--- Add the requirements for the rated current of the plug connector (see 5.2.2 of this Edition);
--- Change the classification reference standard for the protection against electric shock of
equipment (see 5.2.3 of this Edition; 5.2.3 of the 2008 Edition);
--- Change the wire types for cord sets and interconnection cord sets (see Table 1 of this
Edition; Table 1 of the 2008 Edition);
--- Delete the requirements for wire length (see 5.2.6 of the 2008 Edition);
--- Change the requirements for checking electrical continuity and polarity (see Clause 6 of
this Edition; Clause 6 of the 2008 Edition);
--- Change the routine safety tests for factory-wired cord sets and interconnection cord sets
(see Appendix A of this Edition; Appendix A of the 2008 Edition);
--- Add the requirements for Y-splitter interconnection part (see Appendix B of this Edition).
This Document modifies and adopts IEC 60799.2018 Electrical Accessories - Cord Sets and
Interconnection Cord Sets.
The technical differences and the causes between this Document and IEC 60799.2018 are as
follows.
--- Replace IEC 60320-1 (see Clauses 3 and 5) by the normatively referenced GB/T 17465.1-
2022 to adapt to China's technical conditions and increase operability;
--- Replace IEC 60884-1 (see Clause 5) by the normatively referenced GB/T 2099.1 to adapt
to China's technical conditions and increase operability;
--- Replace IEC 60320-2-3 (see 5.1) by the normatively referenced GB/T 17465.3 to adapt
to China's technical conditions and increase operability;
--- Change the requirements for equipment classification. According to China's plug type,
change 5.2.3 to a cord set equipped with a connector for Class II equipment can be
equipped with a plug for Class I equipment that complies with GB/T 1002 to adapt to
China's technical conditions and increase operability;
--- Replace IEC 61140 by the normatively referenced GB/T 17045 to adapt to China's
technical conditions and increase operability (see 5.2.3 of this Edition);
--- Change the inspection requirements for electrical continuity and polarity (see Clause 6
of this Edition) to adapt to China's technical conditions and increase operability;
--- Add the requirements for Y-splitter interconnection part (see Appendix B of this Edition)
to adapt to China's technical conditions and increase operability.
This Document mad ethe following editorial modifications.
--- Incorporate the content of IEC 60799.2018/AMD1.2022, and mark it with a vertical
double line (‖) on the outside;
--- Supplement "This Document specifies the requirements for components, the entire
assembly, electrical continuity and polarity of cord sets and interconnection cord sets
used in household and similar equipment so as to comply with the provisions of GB/T
1.1" in Clause 1 "Scope";
--- Change the NOTEs of the marking parts (see 5.2.4 of this Edition) to adapt to China's
technical conditions and increase operability;
--- Add Bibliography.
Please note some contents of this Document may involve patents. The issuing agency of this
Document shall not assume the responsibility to identify these patents.
This Document was proposed by China Electrical Equipment Industrial Association.
This Document shall be under the jurisdiction of National Technical Committee on Electrical
Accessories of Standardization Administration of China (SAC/TC 67).
Drafting organizations of this Document. CVC Testing Technology Co., Ltd.; Guangdong
Huasheng Electrical Appliances Co., Ltd.; China National Electric Apparatus Research Institute
Co., Ltd.; Wenzhou Chint Building Electrics Co., Ltd.; Linoya Electronic Technology Co., Ltd.;
Unirise Electronics Wire and Cable Limited; Volex Cable Assembly (Shenzhen) Co., Ltd.;
Goneo Group Co., Ltd.; Anhui Hengchuangkai Electric Technology Co., Ltd.; Hangzhou
Hongshi Electrical Co., Ltd.; Zhejiang Delixi International Electrical Co., Ltd.; Henan
Guowang Cable Group Co., Ltd.; Yueqing Redstar Electronics Co., Ltd.; Hubei Midea
Refrigerator Co., Ltd.; Guangdong Jinhuilong Switch Co., Ltd.; Guangzhou Customs District
Technology Center; Zhejiang Zhongxun Electronics Co., Ltd.; Cixi Wanneng Electron Co., Ltd.;
China Quality Certification Center; Zhejiang Yuehua Telecommunication Co., Ltd.; Wenzhou
Netbrand Wire & Cable Co., Ltd.; Asap Technology (Jiangxi) Co., Ltd.; Foshan Site Conductive
Technology Co., Ltd.; China Inspection Group Gongxin Security Technology Co., Ltd.;
Shenzhen Comlink Electronics Co., Ltd.; Anhui Baishang Baide Cable Co., Ltd.; Dongguan
Kaoele Electrics Co., Ltd.; Guangzhou Chuangbo Mechanical and Electrical Equipment
Installation Co., Ltd.; Shenzhen Top-link Technologies Co., Ltd.; Jianye Cable Group Co., Ltd.;
Jintai Cable Co., Ltd.; Quzhou College of Technology; Silon Cable Co., Ltd.; Qingdao Riken
Wire & Cable Co., Ltd.; Shenzhen Super Jie Sensor Electronics Co., Ltd.; Chuanyue Cable
Group Co., Ltd.; Jingfeng Group Co., Ltd.; Guiyang Zhongan Technology Group Co., Ltd.;
Zhejiang Fangyuan Test Group Co., Ltd.; Ningbo YLK Electrical Co., Ltd.; Fujian Huiyang
Cable Technology Co., Ltd.; Ningbo Xuanshi Electronics Co., Ltd.; Hebei Hangpai Cable Co.,
Ltd.; Intertek Testing Service (Shanghai) Ltd.; Hongfeng Cable Co., Ltd.; Shenxing Cable
Group Co., Ltd.; Shenzhen Jinling Electronics Co., Ltd.; Dongguan SESO Technology Co.,
Ltd.; Dongguan Zhongtan Probe Co., Ltd.; Yongtong Zhongce Cable Co., Ltd.; Dongguan
Yongsheng Wire Technology Co., Ltd.; Guangdong Indel B Enterprise Co., Ltd.; Shenzhen
Zhenqin Electronic Technology Co., Ltd.; Shenzhen Yonggui Technology Co., Ltd.; Shenzhen
Changjiang Connectors Co., Ltd.; Shenzhen Red Banner Electrician Technology Co., Ltd.;
Shandong Yaosi Intelligent Technology Co., Ltd.; Yiwu Quanyi Mould Industry Development
Co., Ltd.; Huizhou Hongya Electronics Co., Ltd.; and Ninghai Kaiteli Electronic Appliance Co.,
Ltd.
Chief drafting staffs of this Document. Cai Jun, Xie Jizhu, Xu Zhiqin, Sun Ting, Jia Yuehui, Hu
Lanfang, Bai Jiangong, Qiu Hong, Deng Hongling, Zhang Weijun, Shu Meijun, Zhou Jialiang,
Wang Xiaoli, Sun Shihao, Chen Aguo, Sun Zhiqing, Ji Shunfeng, Qu Hailiang, Yu Mengda, Liu
Shuiqiang, Wang Sheng, Hu Zhisheng, Zheng Dongsheng, Chen Shuobang, Li Weibin, Chen
Yiming, Wang Wenchao, He Haishun, Bai Yan, Xiao Lan, Sheng Junkai, Bai Xuesong, Li
Dongfang, Zhao Xichuan, Zhang Jiemin, Du Baoguo, Cai Juncai, Xu Dejun, Chen Lingxiang,
Xu Jianchu, Xu Zengyu, Liao Changchang, Lou Cuihua, Zhang Junzhi, Wu Yang, Xue
Dongping, Song Jianchang, Wang Jiaying, Zheng Liqing, Duan Rongbin, Wu Yingfa, Zhang
Qiusheng, Dong Kun, Li Yao, Chen Xuewei, Liu Yongqiang, Shi Jiejun, Xie Gang, Fei Ping,
He Xueping, Chen Zhiping, Wang Zhewei, Jin Chenggao, Zhang Shijun, and Chu Zhikan.
The historical editions replaced by this Document are as follows.
--- GB 15934-1996 was first-time published in 1996; first-time revised in 2008;
--- It is second-time revised; and combines the contents of GB/T 26219-2010 Electrical
Accessories—Y-Splitter Cord Sets and Y-Splitter Interconnection Cord Sets.
Electrical Accessories – Cord Sets and Interconnection Cord
Sets
1 Scope
This Document specifies the requirements for components, the entire assembly, electrical
continuity and polarity of cord sets and interconnection cord sets used in household and similar
equipment.
2 Normative References
The provisions in following documents become the essential provisions of this Document
through reference in this Document. For the dated documents, only the versions with the dates
indicated are applicable to this Document; for the undated documents, only the latest version
(including all the amendments) is applicable to this Document.
GB/T 1002 Single phase plugs and socket-outlets for household and similar purposes -
Types, basic parameters and dimensions
3 Terms and Definitions
For the purposes of this Document, the following terms and definitions apply.
The websites of terminology databases used for standardization maintained by ISO and IEC are
as follows.
4 General Requirements
The design and construction of cord sets and interconnection cord sets shall ensure that the
products perform reliably and are not dangerous to users and the surrounding environment
during normal use.
5 Requirements
The rated voltage of the connector and wire shall be no less than that of the corresponding plug.
For interconnection cord set, the rated voltage of the connector and the plug connector shall be
the same.
The classification of the plug and connector according to the protection against electric shock
shall be the same as that of the equipment to be connected; and the classification of the
equipment according to protection against electric shock shall be in accordance with GB/T
17045.
6 Electrical Continuity and Polarity
Cord set and interconnection cord set used in polarized systems shall ensure electrical
continuity between the corresponding plug/plug connector pins and connector sleeves of each
pole.
7 EMC Requirements
Requirements for accessories equipped with electronic components are not included because
such needs have not yet been determined.
These cord sets and interconnection cord sets are not sensitive to normal electromagnetic
except for the electromagnetic interference that may occur during occasional operation of plugging and
unplugging accessories. The frequencies, levels, and results of these electromagnetic emissions are
considered to be part of the normal electromagnetic environment.
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB/T 15934-2024 be delivered?Answer: The full copy PDF of English version of GB/T 15934-2024 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB/T 15934-2024_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 15934-2024_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 15934-2024 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. Question 5: Should I purchase the latest version GB/T 15934-2024?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 15934-2024 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. How to buy and download a true PDF of English version of GB/T 15934-2024?A step-by-step guide to download PDF of GB/T 15934-2024_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 15934-2024".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |