GB/T 13912-2020 PDF English
US$255.00 · In stock · Download in 9 secondsGB/T 13912-2020: Metallic coatings--Hot dip galvanized coatings on fabricated iron and steel articles--Specifications and test methods Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid GB/T 13912: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB/T 13912-2020 | English | 255 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Metallic coatings--Hot dip galvanized coatings on fabricated iron and steel articles--Specifications and test methods
| Valid |
| GB/T 13912-2002 | English | 85 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Metallic coatings -- Hot dip galvanized coatings on fabricated iron and steel articles -- Specifications and test methods
| Obsolete |
| GB/T 13912-1992 | English | 319 |
Add to Cart
|
3 days
|
Metallic coatings--Hot dip galvanized coatings on fabricated iron and steel articles--Specifications
| Obsolete |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB/T 13912-2020
GB/T 13912-2020: Metallic coatings--Hot dip galvanized coatings on fabricated iron and steel articles--Specifications and test methods
---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT13912-2020
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 25.220.40
A 29
Replacing GB/T 13912-2002
Metallic coatings - Hot dip galvanized coatings on
fabricated iron and steel articles - Specifications and
test methods
(ISO 1461.2009, Hot dip galvanized coatings on fabricated iron and
steel articles - Specifications and test methods, MOD)
Issued on. JUNE 02, 2020
Implemented on. APRIL 01, 2021
Issued by. State Administration for Market Regulation;
Standardization Administration of the PRC.
Table of Contents
Foreword... 3
1 Scope... 6
2 Normative references... 6
3 Terms and definitions... 7
4 General requirements... 10
4.1 General... 10
4.2 Hot dip galvanizing bath... 10
4.3 Information to be supplied by the purchaser... 10
4.4 Safety... 11
5 Acceptance and sampling... 11
6 Coating requirements... 11
6.1 Appearance... 11
6.2 Thickness... 12
6.3 Renovation... 16
6.4 Adhesion... 17
6.5 Acceptance criteria... 17
7 Certificate of compliance... 18
Annex A (Normative) Information to be supplied... 19
Annex B (Normative) Safety requirements... 21
Annex C (Informative) Corrosion resistance of hot dip galvanized coatings.. 22
Annex D (Informative) Determination of thickness... 23
Annex E (Informative) Renovation of uncoated or damaged areas... 24
Bibliography... 25
Foreword
This Standard is drafted in accordance with the rules given in GB/T 1.1-2009.
This Standard replaces GB/T 13912-2002 "Metallic coatings - Hot dip
galvanized coatings on fabricated iron and steel articles - Specifications and
test methods". Compared with GB/T 13912-2002, the main technical changes
of this Standard are as follows.
- ADD the terms 3.16 “Zinc melt” and 3.17 “Weld seepage”.
- 4.1 “General” incorporates the previous 4.2 “Base metal”; adjust the
previous 4.1 “Information to be provided by the purchaser” into Annex A.
- Adjust the previous 6.3 “Uncoating and renovation” into Annex E and make
supplements.
- Delete the previous Clause 7 “Test methods”. Incorporate the previous 7.1
“Appearance test” and 7.3 “Adhesion test” with the corresponding
provisions in Clause 6.Adjust the previous 7.2 “Thickness measurement
part” into Annex D.
This Standard uses the redraft law to modify and adopt ISO 1461.2009 "Hot dip
galvanized coatings on fabricated iron and steel articles - Specifications and
test methods".
Compared with ISO 1461.2009, this Standard has been adjusted in terms of
structure. Annex E and Annex C of ISO 1461.2009 have been adjusted to Annex
C and Annex E of this Standard, respectively.
The technical differences between this Standard and ISO 1461.2009 and their
reasons are as follows.
- As for the normative references, this Standard has made adjustments with
technical differences, to adapt to the technical conditions of China. The
adjustments are mainly reflected in Clause 2 “Normative references”. The
specific adjustments are as follows.
Replace ISO 752 with GB/T 470 which modifies and adopts the
international standard (see 4.2);
Replace ISO 2859-1 with GB/T 2828.1 which is identical to the
international standard (see 6.2.3);
Replace ISO 2859-2 with GB/T 2828.2 which is non-equivalent to the
international standard (see 6.2.3);
Replace ISO 2859-3 with GB/T 2828.3 which is identical to the
international standard (see 6.2.3);
Replace ISO 2178 with GB/T 4956 which is identical to the international
standard (see 6.2.2);
Replace ISO 3882 with GB/T 6463 which is identical to the international
standard (see 6.2.2);
Replace ISO 2064 with GB/T 12334 which is identical to the
international standard (see Clause 3);
Replace ISO 2808 with GB/T 13452.2 which is identical to the
international standard (see 6.2.2);
Replace ISO 1460 with GB/T 13825 which is identical to the
international standard (see 6.2.2);
Replace ISO 10474 with GB/T 18253 which is identical to the
international standard (see Clause 7).
This Standard has made the following editorial changes.
- CHANGE the standard name to "Metallic coatings - Hot dip galvanized
coatings on fabricated iron and steel articles - Specifications and test
methods";
- According to GB/T 1.1-2009, appropriately supplement and adjust the
content of Clause 1 "Scope";
- According to the order mentioned in the standard text, adjust the numbers
of Annex C and Annex E.
This Standard was proposed by China Machinery Industry Federation.
This Standard shall be under the jurisdiction of National Technical Committee
57 on Metallic and Non-metallic Coating of Standardization Administration of
China (SAC/TC 57).
Drafting organizations of this Standard. Wuhan Research Institute of Materials
Protection, Maanshan Shuntai Rare Earth & New Materials Co., Ltd., Jiangsu
Guoqiang Galvanization Industrial Co., Ltd., Shanghai Yongfeng Hot-dip
Galvanizing Co., Ltd., South China University of Technology, Jiangsu Shengda
Zhongyuan Electric Co., Ltd., Tongxiang Tiesheng Line Equipment Co., Ltd.
Main drafters of this Standard. Wu Yong, Kong Gang, Yuan Chong, Yuan
Guoqiang, Liu Jilu, Shi Zhimin, Zhu Xiaochun, Ran Chengjin, Xu Zhongtang,
Pan Wengan, Shen Hongwei, Yi Juan, Xia Jingzhong.
The previous editions of the standard replaced by this Standard were released
as follows.
- GB/T 13912-1992, GB/T 13912-2002.
Metallic coatings - Hot dip galvanized coatings on
fabricated iron and steel articles - Specifications and
test methods
1 Scope
This Standard specifies the specifications and test methods for hot dip
galvanized coatings on fabricated iron and steel articles. This Standard does
not specify the after-treatment and protective coating of hot dip galvanized
products.
2 Normative references
The following documents are indispensable for the application of this document.
For the dated references, only the editions with the dates indicated are
applicable to this document. For the undated references, the latest edition
(including all the amendments) are applicable to this document.
GB/T 470 Zinc ingots (GB/T 470-2008, ISO 752.2004, MOD)
3 Terms and definitions
For the purposes of this document, the terms and definitions given in GB/T
12334 and the following apply.
Total thickness of coating of zinc and/or zinc iron alloys on iron and steel surface,
expressed in μm.
Mean value of coating thickness obtained from the specific number of
measurements within a reference area for a magnetic test OR thickness
conversion value of the coating mass measured by a gravimetric test for one
measurement.
4 General requirements
The hot dip galvanizing bath shall primarily contain molten zinc. The total of the
other elements (as identified in GB/T 470, EN 1179 or EN 13283) in the molten
zinc shall not exceed 1.5 % by mass.
5 Acceptance and sampling
Acceptance inspection can be undertaken before the products leave the hot dip
galvanizers custody, unless otherwise specified at the time of ordering by the
purchaser.
6 Coating requirements
In case of dispute regarding the test method, the method of calculating the
coating thickness shall be by the determination of the mean mass of hot dip
galvanized coating per unit area using the gravimetric method in accordance
with GB/T 13825, and the nominal density of the coating, 7.2 g/cm3, shall be
used for calculation purposes. Where less than 10 articles are involved, the
purchaser shall not have to accept the gravimetric test if that would involve the
destruction of articles and unacceptable remedial costs to the purchaser.
7 Certificate of compliance
When required, the hot dip galvanizer shall provide a certificate of compliance
with the requirements of this Standard (see GB/T 18253).
Annex A
(Normative)
Information to be supplied
A.1 Essential information for provision by the purchaser to the galvanizer
The number of this Standard, i.e. GB/T 13912, shall be supplied by the
purchaser to the galvanizer.
A.2 Additional information for provision by the purchaser to the
galvanizer
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB/T 13912-2020 be delivered?Answer: The full copy PDF of English version of GB/T 13912-2020 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB/T 13912-2020_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 13912-2020_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 13912-2020 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. Question 5: Should I purchase the latest version GB/T 13912-2020?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 13912-2020 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. How to buy and download a true PDF of English version of GB/T 13912-2020?A step-by-step guide to download PDF of GB/T 13912-2020_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 13912-2020".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|