GB/T 1019-2008 PDF English
US$75.00 · In stock · Download in 9 secondsGB/T 1019-2008: General requirements for the package of household and similar electrical appliances Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid GB/T 1019: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB/T 1019-2008 | English | 75 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
General requirements for the package of household and similar electrical appliances
| Valid |
| GB/T 1019-1989 | English | 399 |
Add to Cart
|
3 days
|
General requirements for packings of household electrical appliances
| Obsolete |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB/T 1019-2008
GB/T 1019-2008: General requirements for the package of household and similar electrical appliances
---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT1019-2008
GB
NATIONAL STANDARD OF
THE PEOPLE’S REPUBLIC OF CHINA
ICS 97.040.20
Y 68
Replacing GB/T 1019-1989
General requirements for the package of
household and similar electrical appliances
Issued on. JUNE 26, 2008
Implemented on. MAY 01, 2009
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine;
Standardization Administration Committee.
Table of Contents
Foreword... 3
1 Scope... 4
2 Normative references... 4
3 Terms and definitions... 5
4 Technical requirements... 6
5 Test methods... 8
6.Packing mark... 11
Foreword
This standard replaces GB/T 1019-1989.
This standard has made the following changes, compared with the previous
version.
The “test method after the product packaging” that was listed in previous
standard’s appendix is moved into the standard main-text. And the main test
methods are revised as follows.
1) For package pressure stacking test that occurs after humidity and
temperature test, the height difference of the package between after-test
and before-test is changed from "shall be less than 1.2cm/m" to "shall be
less than 1.5cm/m";
2) The impact velocity of bevel impact test is changed from “v = 2.2 m/s” to
“v = 1.5 m/s”;
3) Cancel the "cross-wood bump test";
4) In drop test, for the product that cannot be inverted, it is changed from
"continuously drop test 6 times to the bottom-subface 3" to "continuously
drop test 3 times to the bottom-subface 3";
5) The drop height in drop test is adjusted for the circulation conditions 1
and 2;
6) Add the chapter "Packing Mark".
This standard was proposed by China National Light Industry Council.
This standard shall be under the jurisdiction of National Household Electrical
Standardization Technical Committee.
The main drafting organizations of this standard. China Household Electrical
Appliances Research Institute, Midea Group Co., Ltd., Henan Xinfei Electric
Group, Wuxi Little Swan Co., Ltd., Bo Xihua Electric (Jiangsu) Co., Ltd., Gree
Electric Co., Ltd., Philips (China) Investment Co., Ltd., Matsushita Electric
(China) Co., Ltd., Guangdong Hisense Kelon Electric Co., Ltd., Beijing Yadu
Technology Co., Ltd.
The main drafters of this standard. Zhu Yan, Jin Yanhong, Liu Lingling, Liu
Wenfa, Gao Yihong, Zhang Tao, Zhang Yuqi, Wang Yali, Yang Ming, Chen Hui.
This standard was first-released in 1989, and this is the first revision.
General requirements for the package of
household and similar electrical appliances
1 Scope
This standard specifies term definitions, technical requirements, test methods
and marks of package of household and similar electrical appliances. This
standard applies to household and similar electrical appliances.
2 Normative references
The provisions of the following documents become the terms of the standard
through reference in this standard. For dated references, all the subsequent
amendments (excluding corrigendum) or revisions do not apply to this
standard. However, encourage the parties who reach an agreement in
accordance with this standard to study whether to use the latest version of
these documents. For undated references, the latest version applies to this
standard.
GB/T 191 Packaging Pictorial marking for handling of goods (GB/T
191-2008, ISO 780.1997, MOD)
GB/T 2423.3 Environmental testing for electronic components products -
Part 2.Test methods Test Cab. Constant hot and humid test (GB/T
2423.3-2006, IEC 60068-2-78.2001, IDT)
GB/T 4122.1 Packaging Terms Part 1.Basics
GB/T 4768-1995 Mould-proof packaging
GB/T 4857.1 Packaging Transport packaging parts labeling method of the
test (GB/T 4857.1-1992, eqv ISO 2206.1987)
3 Terms and definitions
The following terms and definitions apply to this standard.
3.1 General requirements
Household and similar electrical appliances shall have the basic packaging
requirements.
3.2 Package
In the process of circulation, it is the generic name used for containers,
materials and ancillary materials according to certain technical methods in
order to protect the products, facilitate the transport and promote sales. And it
refers to operational activities to apply certain technical methods to achieve the
above-mentioned purpose in the course of using containers, materials and
ancillary objects.
3.3 Moisture-proof packaging
It is a kind of packaging in order to prevent moisture infiltration of packaging
and affect the quality of the contents of the package to take some protective
measures.
3.4 Mould-proof packaging
It is a kind of packaging in order to prevent the contents from going moldy and
affect the quality to take some protective measures.
4 Technical requirements
4.1 General requirements
The packaging of household and similar electrical appliances shall be
designed based on the nature of the products, characteristics, storage and
transport conditions. Product packaging shall be solid, safe, reliable, easy to
handle. In the conditions of normal handling and transport and during storage,
ensure product safety and performance not to be compromised because
packaging is damaged, molded and rusted.
4.2 Moisture-proof packaging
If products need moisture-proof packaging, the packaging shall be consistent
with the provisions of Chapter 4 of GB/T 5048-1999.
4.3 Mould-proof packaging
If the products need mould-proof packaging, the packaging shall comply with
the provisions of GB/T 4768-1995 Chapter 5.
4.4 Rust-proof packaging
The products requiring rust-proof packaging and metal surface easy to rust
shall comply with the provisions of Chapter 5 of GB/T 4879-1999.
The products requiring rust-proof packaging shall be packaged according to
the design requirements of products and packaging. Packaging shall be
consistent with certain rust-proof level or standards. Rust-resisting material
shall meet the following requirements.
4.5 Shockproof packaging
The products requiring shockproof packaging shall meet the requirements of
product packaging design.
After the test, the shockproof packaging piece shall meet the following
requirements.
4.6 Packaging material
The packaging material used in products shall meet the general requirements
of packaging material in China. Encourage the use of recyclable packaging
material.
5 Test methods
5.1 Test Preparation
In the test, parts of the package shall be marked, and various parts of the test
package shall be numbered according to the provisions of GB/T 4857.1.It is as
shown in the figure.
5.2 Test condition
Before the test, the package shall be adjusted for temperature and humidity
conditioning treatment according to the provision of GB/T 4857.2.
5.3 Moisture-proof test
Test methods refer to GB/T 2423.3, and testing time is according to the
provisions of Table 1.
5.4 Mould-proof test
Test methods refer to GB/T 4857.21.After the test it shall meet the
requirements of 4.3.
5.5 Rust-proof test
Test methods refer to Chapter 7 of GB/T 4879-1999.After the test it shall meet
the requirements of 4.4.
5.7 Stacking test
Stacking test can use direct stacking test or pressure stacking test.
Stacking test method shall be carried out according to the provisions of GB/T
4857.3.
5.8 Bevel impact test
Bevel impact test is conducted according to the bevel test method of GB/T
4857.11.
5.9 Drop test
5.9.1 Package drop test refers to GB/T 4857.5.
5.9.2 In turn, face down the surfaces 3, 2, 5, 4, 6 of the test specimen. Lift up to
predetermined height according to the provisions of Table 3, and release at
zero initial-velocity, each surface drops down for once.
6.Packing mark
Pictorial markings for handling of packages shall be correctly chosen based on
product features and the relevant provisions of GB/T 191.
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB/T 1019-2008 be delivered?Answer: The full copy PDF of English version of GB/T 1019-2008 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB/T 1019-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 1019-2008_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 1019-2008 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. Question 5: Should I purchase the latest version GB/T 1019-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 1019-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. How to buy and download a true PDF of English version of GB/T 1019-2008?A step-by-step guide to download PDF of GB/T 1019-2008_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 1019-2008".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |