GB 19592-2019 PDF English
US$85.00 · In stock · Download in 9 secondsGB 19592-2019: Detergent Additive for Motor Gasoline Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid GB 19592: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB 19592-2019 | English | 85 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Detergent Additive for Motor Gasoline
| Valid |
| GB 19592-2004 | English | 399 |
Add to Cart
|
3 days
|
[Replaced by GB 19592-2019] Detergent additive for vehicle gasoline
| Obsolete |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB 19592-2019
GB 19592-2019: Detergent Additive for Motor Gasoline---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GB19592-2019
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 75.140
E 61
Replacing GB 19592-2004
Detergent Additive for Motor Gasoline
Issued on. OCTOBER 14, 2019
Implemented on. MAY 1, 2020
Issued by. State Administration for Market Regulation;
Standardization Administration of the People’s Republic of
China.
Table of Contents
Foreword... 3
1 Scope... 5
2 Normative References... 5
3 Terms and Definitions... 7
4 Requirements and Test Methods... 7
5 Inspection Rules... 8
6 Marking, Packaging, Transportation and Storage... 10
7 Safety... 10
Appendix A (Normative) Base Fuel... 11
Foreword
All the technical content in this Standard is mandatory.
This Standard was drafted in accordance with the rules in GB/T 1.1-2009.
This Standard serves as a replacement of GB 19592-2004 Detergent Additive for
Vehicle Gasoline. In comparison with GB 19592-2004, the main technical changes are
as follows.
---The scope of application is modified (see Chapter 1);
---Normative references are modified (see Chapter 2);
---The definition of base fuel is modified (see 3.1);
---The definition of detergent additive for motor gasoline is modified (see 3.2);
---The definition of intake system is deleted (see 3.3 in Version 2004);
---The definition of intake valve deposits is modified (see 3.3);
---The definition of total combustion deposits is modified (see 3.4);
---Table content in the previous version is modified into the content in 4.1 (see 4.1;
Table 1 in Version 2004);
---Pour point indicator is modified from “not higher than -15 °C” into “not higher
than -20 °C” (see Table 1);
---Flash point indicator is modified from “not lower than 45 °C” into “not lower than
60 °C” (see Table 1);
---The technical requirements of sulfur content and chlorine content are added
(see Table 1);
---The expression of technical requirements of anti-rust property is modified from
“not more than 5%” into “not more than moderate rust” (see Table 1);
---The expression of fuel nozzle cleanliness is deleted and modified into “nozzle
mass flow loss rate” (see Table 1);
---The requirements of deposit decline rate of intake system are deleted (see Table
1 in Version 2004);
---“Simulated intake valve deposit decline rate” is modified into “simulated intake
valve deposit mass”; “report” is modified into “not more than 2.0 mg”; test
method is modified into GB/T 37322-2019 (see Table 1);
---Technical indicators of average intake valve deposit mass are modified, in other
words, Method 1 is modified from “not more than 70 mg” into “not more than 30
mg”; Method 2 is modified from “not more than 130 mg” into “not more than 50
mg” (see Table 1);
---“Total combustion chamber deposit increase” is modified into “total combustion
chamber deposit mass increase”; technical indicator is modified from “not more
than 40%” into “not more than 30%” (see Table 1);
---A part of content in Note b in the previous version is modified into NOTE e (see
Table 1); the other part of content is placed into Appendix A (see Table A.1;
Table 1 in Version 2004);
---Note f is added to Table 1 (see Table 1);
---Inspection rules are modified (see Chapter 5);
---The content of designation is deleted (see Chapter 6 in 2004);
---The content of safety is added (see Chapter 7);
---Appendix A Base Fuel is modified (see Appendix A);
---Appendix B Gasoline Engine Intake Valve Deposit Simulation Test Method in
the previous version is deleted (see Appendix B in Version 2004).
This Standard was proposed by and shall be under the jurisdiction of National Energy
Administration.
The drafting organizations of this Standard. SINOPEC Research Institute of Petroleum
Processing; Lanzhou Lubricant Research and Development Center of PetroChina
Company Limited; Chinese Research Academy of Environmental Sciences; Shenzhen
JPLUS Chemical Technology Co., Ltd.; Shandong EFIRM Biochemistry and
Environmental Protection Co., Ltd.
The main drafters of this Standard. Zhangxin, Liu Quanshan, Miao Qile, Yuexin, Li
Ruibo, Xie Jianhai, Chen Yumeng, Liang Wangen, Sunmeng.
The issuing of the previous versions of the standard replaced by this Standard is as
follows.
---GB 19592-2004.
Detergent Additive for Motor Gasoline
Warning. if appropriate precautions are not abided by, there might be dangers
in the production, storage, transportation and usage process of products that
belong to this Standard. This Standard does not intend to propose suggestions
to all the safety issues related with the products. Before putting this Standard
into effect, users shall undertake the responsibility of establishing appropriate
safety and preventive measures; confirming the applicability of relevant
stipulations and restrictions.
1 Scope
This Standard stipulates the terms and definitions, requirements, test methods,
inspection rules, marking, packaging, transportation, storage and safety of detergent
additive for motor gasoline.
This Standard is applicable to detergent additives used in motor gasoline and motor
ethanol gasoline.
2 Normative References
The following documents are indispensable to the application of this document. In
terms of references with a specified date, only versions with a specified date are
applicable to this document. In terms of references without a specified date, the latest
version (including all the modifications) is applicable to this document.
GB 190 Packing Symbol of Dangerous Goods;
GB/T 261 Determination of Flash Point - Pensky-Martens Closed Cup Method;
GB/T 511 Petroleum, Petroleum Products and Additives - Method for Determination of
Mechanical Admixtures;
GB/T 3535 Petroleum Products - Determination of Pour Point;
GB/T 4756 Method for Manual Sampling of Petroleum Liquids;
GB/T 11140 Standard Test Method for Sulfur in Petroleum Products by Wavelength
Dispersive X-ray Fluorescence Spectrometry;
GB 17930 Gasoline for Motor Vehicles;
GB/T 19230.1 Test Method for Evaluating Gasoline Detergent in Use - Part 1.Test
Method for Rust-preventing Characteristics of Gasoline Detergent;
GB/T 19230.2 Test Method for Evaluating Gasoline Detergent in Use - Part 2.Test
Method for Demulsibility of Gasoline Detergent;
3 Terms and Definitions
The following terms and definitions are applicable to this document.
3.1 Base Fuel
Base fuel refers to fuel that is used to inspect a certain property of additives in tests.
Base fuel has satisfying distinctiveness and does not include additives that may
improve the property being inspected.
3.3 Intake Valve Deposits; IVDs
Intake valve deposits refers to any matters that are generated by fuel, lubricating oil
and additives, or, inhaled from the outside, and deposit on the surface of intake valve.
3.4 Total Combustion Deposits; TCDs
Total combustion deposits refers to any matters that are generated by fuel, lubricating
oil and additives, or, inhaled from the outside, and deposit on the part of combustion
chamber (cylinder head and piston top).
4 Requirements and Test Methods
4.1 Chemical substances that may generate ash content cannot be manually added to
detergent additive for motor gasoline. Motor gasoline and motor ethanol gasoline,
which adds detergent additive in accordance with the recommended dosage, shall
comply with corresponding standards.
4.2 The technical requirements and test methods of detergent additive for motor
gasoline are shown in Table 1.
5 Inspection Rules
5.1 Inspection Classification and Inspection Items
5.1.1 Exit-factory inspection
Exit-factory batch inspection items include. appearance, pour point, flash point (closed
cup), nitrogen content, sulfur content, chlorine content, anti-rust property,
demulsification, simulated intake valve deposit mass.
5.1.2 Type inspection
Type inspection items include all the items stipulated in the technical requirements in
Table 1.
5.3 Sampling
Sampling shall comply with GB/T 4756.Sampling quantity shall be not less than 1 L;
reserve for inspection and as reserved sample.
5.4 Determination Rules
When the result of exit-factory inspection and the result of type inspection completely
comply with the stipulations in Chapter 4, then, the batch of products shall be
determined as qualified. When the result of simulated intake valve deposit mass and
the result of average intake valve deposit mass in engine test are contradictory, the
result of engine test shall be subject to.
5.5 Re-inspection Rules
If the result of exit-factory inspection and the result of type inspection do not comply
with the requirements of this Standard, re-take a double size of samples from the same
batch of products; conduct re-inspection of the disqualified items.
6 Marking, Packaging, Transportation and Storage
Detergent additive for motor gasoline belongs to flammable liquid. The marking,
packaging, transportation, storage and delivery inspection of products shall comply
with SH/T 0164, GB 30000.7-2013, GB 190 and NB/SH/T 0967.
7 Safety
Detergent additive for motor gasoline belongs to flammable liquid. Please refer to
Appendix D in GB 30000.7-2013 for a statement of its dangers and precautions.
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB 19592-2019 be delivered?Answer: The full copy PDF of English version of GB 19592-2019 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB 19592-2019_English with my colleagues?Answer: Yes. The purchased PDF of GB 19592-2019_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB 19592-2019 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. Question 5: Should I purchase the latest version GB 19592-2019?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB 19592-2019 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. How to buy and download a true PDF of English version of GB 19592-2019?A step-by-step guide to download PDF of GB 19592-2019_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB 19592-2019".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|