|
Std ID |
Description (Standard Title) |
|
JB 4732-1995
|
[JB 4732-2005 Confirmed in 2005] Steel pressure vessel - Stress analysis design standard
|
|
JB/T 10187-2011
|
Rolling bearings - Specifications for vibration (velocity) of deep groove ball bearings
|
|
JB/T 10499-2005
|
Design application guide of turbo generators under abnormal operation
|
|
JB/T 10563-2006
|
Technical Specification for General Purposes Centrifugal Fans
|
|
JB/T 10600-2006
|
Vertical self-priming pumps
|
|
JB/T 10688-2006
|
Specifications of polyfluortetraethylene gaskets
|
|
JB/T 11988-2014
|
Internal combustion counterbalanced forklift trucks - Energy efficiency test methods
|
|
JB/T 1255-2014
|
Rolling bearings - Parts made from high-carbon chromium bearing steels - Specifications for heat treatment
|
|
JB/T 1306-2008
|
Electric single girder crane
|
|
JB/T 1647.2-2012
|
Straight-side mechanical power press - Part 2: Technical requirements
|
|
JB/T 20104-2007
|
Hardness tester
|
|
JB/T 3300-2010
|
Counterbalanced fork-lift trucks - Testing method for whole machines
|
|
JB/T 4119-2013
|
Solenoid valve for refrigeration equipment
|
|
JB/T 4129-1999
|
Burr height standard for stampings
|
|
JB/T 4730.1-2005
|
Nondestructive testing of pressure equipments. Part 1: General requirements
|
|
JB/T 4730.2-2005
|
[Replaced by NB/T 47013.2-2015] Nondestructive testing of pressure equipments. Part 2: Radiographic testing
|
|
JB/T 4730.3-2005
|
Nondestructive testing of pressure equipment. Part 3: Ultrasonic testing
|
|
JB/T 4730.4-2005
|
Nondestructive testing of pressure equipments. Part 4: Magnetic particle testing
|
|
JB/T 4730.5-2005
|
Nondestructive testing of pressure equipments. Part 5: Penetrant testing
|
|
JB/T 4730.6-2005
|
Nondestructive testing of pressure equipments. Part 6: Eddy current testing
|
|
JB/T 4730.7-2012
|
Nondestructive testing of pressure equipments. Part 7: Visual examination [Renamed to NB/T 47013.7-2012]
|
|
JB/T 4730.8-2012
|
Nondestructive testing of pressure equipments. Part 8: Leak Testing [Renamed to NB/T 47013.8-2012]
|
|
JB/T 4730.9-2012
|
Nondestructive testing of pressure equipments. Part 9: Acoustic emission testing [Renamed to NB/T 47013.9-2012]
|
|
JB/T 5000.14-2007
|
Heavy mechanical general techniques and standards - Part 14: Non-destructive inspection of cast steel
|
|
JB/T 56078-1996
|
Large Hydraulic Turbine - Grading of Product Quality
|
|
JB/T 5948-1991
|
Construction Machinery caliper disc brakes technical conditions
|
|
JB/T 5949-1991
|
Construction machinery shoe brake technical conditions
|
|
JB/T 6057-1992
|
Steel intended to be used in the moulding part of die for plastics and its heat treatment - Technical conditions
|
|
JB/T 6105-2007
|
Specifications for Hydraulic Pump Station in Numerical Control Machine Tools
|
|
JB/T 6289-2005
|
Internal combustion engines - Casting aluminium pistons - Metallographic inspection
|
|
JB/T 6430-2014
|
Oil injected screw air compressor for general use
|
|
JB/T 6539-1992
|
Steel pressure vessel for micro-air compressor
|
|
JB/T 6688-1993
|
Specification for 12-spline Flange Nut and 12 point Flange Nut
|
|
JB/T 6758.1-2007
|
Continuously transposed conductors - Part 1: General requirements
|
|
JB/T 6887-2004
|
Technical condition of cast iron for fans blower and compressor
|
|
JB/T 7155-2007
|
Wheel for wheeled construction machinery - Technical specifications
|
|
JB/T 7361-2007
|
Rolling bearings - Test method for hardness of parts
|
|
JB/T 8127-2011
|
Internal combustion engines - Fuel heaters
|
|
JB/T 8145.2-1995
|
Insulated Cables (Wires) for Railway Vehicles of Rated Voltages Up to and Including 3 KV Chlorosulphonated Polyethylene Insulated Cables (Wires) for Railway Vehicles
|
|
JB/T 8290-2011
|
Non-destructive testing instruments - Magnetic particle flaw detectors
|
|
JB/T 8490-2008
|
Specification for floor type boring and milling and boring machines
|
|
JB/T 8727-2004
|
Hydraulic fluid power - Hose assemblies
|
|
JB/T 8734.2-2012
|
Polyvinyl chloride insulated cables and wires and cords of rated voltages up to and including 450/750 V - Part 2: Insulated cables and wires for fixed wiring
|
|
JB/T 8734.3-2012
|
Polyvinyl chloride insulated cables and wires and cords of rated voltages up to and including 450/750 V. Part 3: Cords and cables for connecting
|
|
JB/T 8734.4-2012
|
Polyvinyl chloride insulated cables and wires and cords of rated voltages up to and including 450/750 V - Part 4: Insulated wires for internal wiring of equipment
|
|
JB/T 8734.5-2012
|
Polyvinyl chloride insulated cables and wires and cords of rated voltages up to and including 450/750 V - Part 5: Screened wires
|
|
JB/T 8816-1998
|
Construction machinery - Drive axle - Technical specifications
|
|
JB/T 8941.1-2014
|
Roots type blowers for general purpose. Part 1: Specification
|
|
JB/T 8941.2-2014
|
Roots type blowers for general purpose. Part 2: Performance test methods
|
|
JB/T 8987-1999
|
The specification of AgCu alloy wire for commutators
|
|
JB/T 9008.1-2014
|
Electric wire rope hoists. Part 1: Types and basic parameter, specification
|
|
JB/T 9101-1999
|
Fan rotor balance
|
|
JB/T 9229-2013
|
Scissors elevating work platforms
|
|
JB/T 9249-1999
|
Vortex shedding flow transducer
|
|
JB/T 9615.1-2000
|
Test methods of the interturn insulation on random wound winding for AC low-voltage machines
|
|
JB 1140-1970
|
(Aircraft PTFE insulated high voltage ignition)
|
|
JB 1145-1973
|
(Tubular fixed tube sheet heat exchanger types and basic parameters)
|
|
JB 1146-1973
|
(Vertical thermosiphon reboiler Types and basic parameters)
|
|
JB 1149-1973
|
(Chinese Industry Standard)
|
|
JB 1151-1973
|
(High pressure seamless steel ultrasonic testing)
|
|
JB 1152-1981
|
(Boiler and pressure vessel steel butt weld ultrasonic inspection)
|
|
JB 1154-1973
|
(Elliptical head type and size)
|
|
JB 1155-1973
|
(60 Degree conical head fold type and size)
|
|
JB 1156-1973
|
(90 Degree conical head fold type and size)
|
|
JB 1165-1973
|
(Chinese Industry Standard)
|
|
JB 1165-1981
|
(Hanging seat)
|
|
JB 1166-1973
|
(Chinese Industry Standard)
|
|
JB 1166-1981
|
(Bearing mount)
|
|
JB 1167-1973
|
(Chinese Industry Standard)
|
|
JB 1167-1981
|
(Saddle supports)
|
|
JB 1168-1980
|
Short-thread milling machines. Safeguarding specifications
|
|
JB 1170-1971
|
(Chinese Industry Standard)
|
|
JB 1170-1975
|
(The NBR PVC insulated cords allyl complexes)
|
|
JB 1171-1976
|
(Connection of nitrile rubber insulation sheathing)
|
|
JB 1189-1971
|
(Chinese Industry Standard)
|
|
JB 1198-1971
|
(Chinese Industry Standard)
|
|
JB 1198-1983
|
(Hole slot wheel)
|
|
JB 1212-1973
|
(Round bubble cap)
|
|
JB 1256-1973
|
(Chinese Industry Standard)
|
|
JB 1256-1977
|
(6020 polyester film)
|
|
JB 1260-1973
|
(Chinese Industry Standard)
|
|
JB 1260-1978
|
(Organic thin film performance test side)
|
|
JB 1272-1984
|
(Precision forging screw press)
|
|
JB 1276-1973
|
(Chinese Industry Standard)
|
|
JB 1284-1985
|
Low-voltage Circuit Breaker
|
|
JB 1287-1973
|
(Can not be demolished spiral plate heat exchanger type, basic parameters and dimensions)
|
|
JB 1294-1982
|
(Air Hammer technical conditions)
|
|
JB 1295.2-1985
|
(Shears technical conditions)
|
|
JB 1296.2-1984
|
(Vertical shearing knife put Ironworkers technical conditions)
|
|
JB 1306-1984
|
(LD electric single girder crane)
|
|
JB 1308-1973
|
(Pg2500kgf/cm valve types and basic parameters)
|
|
JB 1309-1973
|
(Pg2500kgf/cm2 valves, fittings and fasteners technical conditions)
|
|
JB 1310-1973
|
(Pg2500kgf/cm2 pipe ends type, size and technical requirements)
|
|
JB 1311-1973
|
(Pg2500kgf/cm2 with a neck joint type, size and technical requirements)
|
|
JB 1312-1973
|
(Pg2500kgf/cm2 pockets joint type, size and technical requirements)
|
|
JB 1313-1973
|
(Pg2500kgf/cm2 cone cone blind pad mat type, size and technical requirements)
|
|
JB 1314-1973
|
(Pg2500kgf/cm2 turnbuckle type, size and technical requirements)
|
|
JB 1315-1973
|
(Pg2500kgf/cm2 and outside the nut type, size and technical requirements)
|
|
JB 1316-1973
|
(Pg2500kgf/cm2 connector nut type, size and technical requirements)
|
|
JB 1317-1973
|
(Pg2500kgf/cm2 outer nut type, size and technical requirements)
|